[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1496385275-6899-10-git-send-email-anup.patel@broadcom.com>
Date: Fri, 2 Jun 2017 12:04:33 +0530
From: Anup Patel <anup.patel@...adcom.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>, Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Jon Mason <jonmason@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Oza Pawandeep <oza.oza@...adcom.com>,
Srinath Mannam <srinath.mannam@...adcom.com>,
Pramod Kumar <pramod.kumar@...adcom.com>,
Sandeep Tripathy <sandeep.tripathy@...adcom.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com
Subject: [PATCH v6 09/11] arm64: dts: Add I2C DT nodes for Stingray SoC
From: Oza Pawandeep <oza.oza@...adcom.com>
This patch adds I2C DT nodes on Stingray SoC.
Signed-off-by: Oza Pawandeep <oza.oza@...adcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@...adcom.com>
Reviewed-by: Ray Jui <ray.jui@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
---
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 22 ++++++++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 20 ++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index aad45a2..ff59a26 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -54,6 +54,28 @@
status = "okay";
};
+&i2c0 {
+ status = "okay";
+
+ pca9505: pca9505@20 {
+ compatible = "nxp,pca9505";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ pcf8574: pcf8574@20 {
+ compatible = "nxp,pcf8574a";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x27>;
+ };
+};
+
&nand {
status = "ok";
nandcs@0 {
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index e91debe..91ba61e 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -269,6 +269,16 @@
#include "stingray-pinctrl.dtsi"
+ i2c0: i2c@...b0000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x000b0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
gpio_hsls: gpio@...d0000 {
compatible = "brcm,iproc-gpio";
reg = <0x000d0000 0x864>;
@@ -295,6 +305,16 @@
<&pinmux 151 91 4>;
};
+ i2c1: i2c@...e0000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x000e0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
uart0: uart@...00000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
--
2.7.4
Powered by blists - more mailing lists