linux-kernel - [PATCH v5 01/11] serial: exar: Leave MPIOs as output for Commtech adapters

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <0c7b59cdc5a4cb7035656b081e36457eb675fc29.1496388533.git.jan.kiszka@siemens.com>
Date:   Fri,  2 Jun 2017 09:28:44 +0200
From:   Jan Kiszka <jan.kiszka@...mens.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Alexandre Courbot <gnurou@...il.com>
Cc:     Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-serial@...r.kernel.org, linux-gpio@...r.kernel.org,
        Sudip Mukherjee <sudip.mukherjee@...ethink.co.uk>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        Sascha Weisenberger <sascha.weisenberger@...mens.com>
Subject: [PATCH v5 01/11] serial: exar: Leave MPIOs as output for Commtech adapters

Commtech adapters apparently need the original setting as outputs, see
https://marc.info/?l=linux-gpio&m=149557425201323&w=2. Account for that.

Fixes: 7dea8165f1d6 ("serial: exar: Preconfigure xr17v35x MPIOs as output")
Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
---
 drivers/tty/serial/8250/8250_exar.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index b4fa585156c7..8984e8b2d524 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -171,19 +171,26 @@ pci_xr17c154_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 	return default_setup(priv, pcidev, idx, offset, port);
 }
 
-static void setup_gpio(u8 __iomem *p)
+static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p)
 {
+	/*
+	 * The Commtech adapters required the MPIOs to be driven low. The Exar
+	 * devices will export them as GPIOs, so we pre-configure them safely
+	 * as inputs.
+	 */
+	u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00;
+
 	writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
 	writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
 	writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
 	writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
-	writeb(0xff, p + UART_EXAR_MPIOSEL_7_0);
+	writeb(dir,  p + UART_EXAR_MPIOSEL_7_0);
 	writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
 	writeb(0x00, p + UART_EXAR_MPIOINT_15_8);
 	writeb(0x00, p + UART_EXAR_MPIOLVL_15_8);
 	writeb(0x00, p + UART_EXAR_MPIO3T_15_8);
 	writeb(0x00, p + UART_EXAR_MPIOINV_15_8);
-	writeb(0xff, p + UART_EXAR_MPIOSEL_15_8);
+	writeb(dir,  p + UART_EXAR_MPIOSEL_15_8);
 	writeb(0x00, p + UART_EXAR_MPIOOD_15_8);
 }
 
@@ -236,7 +243,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 
 	if (idx == 0) {
 		/* Setup Multipurpose Input/Output pins. */
-		setup_gpio(p);
+		setup_gpio(pcidev, p);
 
 		port->port.private_data = xr17v35x_register_gpio(pcidev);
 	}
-- 
2.12.3