linux-kernel - [PATCH v5 05/11] gpio: exar: Fix iomap request

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <cc421c093ccc3c3b9fd15a4044f2bfd4f9d74c2c.1496388533.git.jan.kiszka@siemens.com>
Date:   Fri,  2 Jun 2017 09:28:48 +0200
From:   Jan Kiszka <jan.kiszka@...mens.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Alexandre Courbot <gnurou@...il.com>
Cc:     Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-serial@...r.kernel.org, linux-gpio@...r.kernel.org,
        Sudip Mukherjee <sudip.mukherjee@...ethink.co.uk>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        Sascha Weisenberger <sascha.weisenberger@...mens.com>
Subject: [PATCH v5 05/11] gpio: exar: Fix iomap request

The UART driver already maps the resource for us. Trying to do this here
only fails and leaves us with a non-working device.

Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
Acked-by: Linus Walleij <linus.walleij@...aro.org>
---
 drivers/gpio/gpio-exar.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index 65126fa1e512..b29890b143ce 100644
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c
@@ -125,14 +125,10 @@ static int gpio_exar_probe(struct platform_device *pdev)
 	int index, ret;
 
 	/*
-	 * Map the pci device to get the register addresses.
-	 * We will need to read and write those registers to control
-	 * the GPIO pins.
-	 * Using managed functions will save us from unmaping on exit.
-	 * As the device is enabled using managed functions by the
-	 * UART driver we can also use managed functions here.
+	 * The UART driver must have mapped region 0 prior to registering this
+	 * device - use it.
 	 */
-	p = pcim_iomap(pcidev, 0, 0);
+	p = pcim_iomap_table(pcidev)[0];
 	if (!p)
 		return -ENOMEM;
 
-- 
2.12.3