linux-kernel - Re: [PATCH v9 0/3] Support for USB DRD PHY driver for NS2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <22badb49-2961-e552-1b99-b7d7d4809b92@ti.com>
Date:   Fri, 9 Jun 2017 17:33:25 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Raviteja Garimella <raviteja.garimella@...adcom.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        Jon Mason <jonmason@...adcom.com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>
CC:     <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <bcm-kernel-feedback-list@...adcom.com>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v9 0/3] Support for USB DRD PHY driver for NS2

Hi,

On Friday 09 June 2017 05:12 PM, Raviteja Garimella wrote:
> Changes in V9: 
> =============
> Rebased on linux-phy next. Driver files and Kconfig/Makefile
> changes now in drivers/phy/broadcom.

merged the _phy_ patches to linux-phy. Thanks for doing multiple revisions to
get it merged.

-Kishon
> 
> Changes in v8:
> =============
> -Renamed phy shutdown routine
> -Used devm_request_irq in stead of threaded irq
> -Removed devm_unregister calls in probe routine
> 
> Changes in v7:
> =============
> Cleaned up unused variables in phy private data structure that's
> missed out in v6.
> Setting of phy mode to device/host is removed from phy power on.
> routine.
> 
> Changes in v6:
> =============
> Removed spin locks which are not required as the references
> to phy_ops in the same driver were removed in v5.
> 
> Removed host/device 'notify' routines which are registered
> using 'extcon_register_notifier'. The irq handler is sufficient
> to deal with the change in extcon events within the same driver.
> 
> Changes in v5:
> =============
> Removed references to phy_ops in the same driver by connect_work
> event handler to change the phy modes.
> 
> To support dynamically changing the mode of the phy, it does
> not require doing a phy reset/programming of PHY PLL. Changes
> are made to the connect_work routine to just program the required
> register bits to achieve this purpose.
> 
> Changes in v4:
> =============
> Remove references to edev->name in debug prints.
> 
> Changes in v3:
> =============
> Remove unnecessary checks for poweron as suggested in review.
> 
> Changes in v2:
> =============
> 1. Initialize file operations .owner field with THIS_MODULE.
> 2. Remove unnecessary gpio example in DT bindings documentation.
>    This is previously acked by Rob Herring <robh@...nel.org>
> 
> Introduction for PATCH v1:
> 
> This patch adds support for USB Dual Role Device Phy for Broadcom
> Northstar2 SoC. Apart from the new phy driver, this patchset contains
> changes to Kconfig, Makefile, and Device tree files.
> 
> This patchset is tested on Broadcom NS2 BCM958712K reference board.
> 
> Raviteja Garimella (3):
>   dt-bindings: phy: Add DT bindings documentation for NS2 USB DRD PHY
>   phy: phy-bcm-ns2-usbdrd: Broadcom USB DRD PHY driver for Northstar2
>   arm64: dts: NS2: Add USB DRD PHY device tree node
> 
>  .../devicetree/bindings/phy/brcm,ns2-drd-phy.txt   |  30 ++
>  arch/arm64/boot/dts/broadcom/ns2.dtsi              |  14 +
>  drivers/phy/broadcom/Kconfig                       |  13 +
>  drivers/phy/broadcom/Makefile                      |   1 +
>  drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c          | 437 +++++++++++++++++++++
>  5 files changed, 495 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
>  create mode 100644 drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
>