linux-kernel - Re: [PATCH 1/3] dt-bindings: Add support for samsung s6e63j0x03 panel binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <70e32f55-431b-fcf2-0d98-8c12ac01794b@samsung.com>
Date:   Mon, 12 Jun 2017 14:29:26 +0200
From:   Andrzej Hajda <a.hajda@...sung.com>
To:     Hoegeun Kwon <hoegeun.kwon@...sung.com>, thierry.reding@...il.com,
        airlied@...ux.ie, robh+dt@...nel.org, mark.rutland@....com,
        catalin.marinas@....com, will.deacon@....com, kgene@...nel.org,
        krzk@...nel.org
Cc:     dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
        javier@....samsung.com, inki.dae@...sung.com
Subject: Re: [PATCH 1/3] dt-bindings: Add support for samsung s6e63j0x03 panel
 binding

Hi Hoegeun,

On 09.06.2017 06:59, Hoegeun Kwon wrote:
> The Samsung s6e63j0x03 is a 1.63" 320x320 AMOLED panel connected using
> MIPI-DSI interfaces.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@...sung.com>
> ---
>  .../bindings/display/panel/samsung,s6e63j0x03.txt  | 24 ++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
> new file mode 100644
> index 0000000..34b6e2a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
> @@ -0,0 +1,24 @@
> +Samsung S6E63J0X03 1.63" 320x320 AMOLED panel

Maybe it would be good to add info about interface, "MIPI DSI command
mode" I suppose.

> +
> +Required properties:
> +  - compatible: "samsung,s6e63j0x03"
> +  - reg: the virtual channel number of a DSI peripheral
> +  - vdd3-supply: I/O voltage supply
> +  - vci-supply: voltage supply for analog circuits
> +  - reset-gpios: a GPIO spec for the reset pin (active high)

Usually reset gpios is active low, also driver code suggests it, if it
is true please fix example also.

With above comments addressed:
Reviewed-by: Andrzej Hajda <a.hajda@...sung.com>

 --
Regards
Andrzej

> +  - te-gpios: a GPIO spec for the tearing effect synchronization signal
> +    gpio pin (active high)
> +
> +Example:
> +&dsi {
> +	...
> +
> +	panel@0 {
> +		compatible = "samsung,s6e63j0x03";
> +		reg = <0>;
> +		vdd3-supply = <&ldo16_reg>;
> +		vci-supply = <&ldo20_reg>;
> +		reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
> +		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
> +	};
> +};