lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6b270b74-a18d-53ff-81b7-649c7c9411a7@synopsys.com>
Date:   Wed, 21 Jun 2017 10:38:43 +0100
From:   Jose Abreu <Jose.Abreu@...opsys.com>
To:     <dri-devel@...ts.freedesktop.org>, <linux-kernel@...r.kernel.org>,
        Alexey Brodkin <Alexey.Brodkin@...opsys.com>,
        Daniel Vetter <daniel.vetter@...ll.ch>
CC:     Carlos Palminha <CARLOS.PALMINHA@...opsys.com>,
        Dave Airlie <airlied@...ux.ie>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Neil Armstrong <narmstrong@...libre.com>
Subject: Re: [PATCH v5 05/10] drm: arcpgu: Use crtc->mode_valid() callback

Hi Daniel, Alexey,


On 25-05-2017 15:19, Jose Abreu wrote:
> Now that we have a callback to check if crtc supports a given mode
> we can use it in arcpgu so that we restrict the number of probbed
> modes to the ones we can actually display.
>
> This is specially useful because arcpgu crtc is responsible to set
> a clock value in the commit() stage but unfortunatelly this clock
> does not support all the needed ranges.
>
> Also, remove the atomic_check() callback as mode_valid() callback
> will be called before.
>
> Signed-off-by: Jose Abreu <joabreu@...opsys.com>
> Reviewed-by: Alexey Brodkin <abrodkin@...opsys.com>

@Daniel: I know that arcpgu is not under drm-misc but could you
apply this into drm-misc-next? Alexey (the arcpgu maintainer)
already gave the reviewed-by and this is also "Reviewed-by: Neil
Armstrong <narmstrong@...libre.com>". It was also tested-by: me.

@Alexey: Is this ok for you?

I need this because I have a pending patch for accepting clock
variations instead of always failing when clk_round_rate() does
not return the expected rate.

Best regards,
Jose Miguel Abreu

> Cc: Carlos Palminha <palminha@...opsys.com>
> Cc: Alexey Brodkin <abrodkin@...opsys.com>
> Cc: Daniel Vetter <daniel.vetter@...ll.ch>
> Cc: Dave Airlie <airlied@...ux.ie>
> Cc: Laurent Pinchart <laurent.pinchart@...asonboard.com>
>
> Changes v4->v5:
> 	- Change commit message to "arcpgu" (Alexey)
> Changes v3->v4:
> 	- Do not use aux function (Laurent)
>
> ---
>  drivers/gpu/drm/arc/arcpgu_crtc.c | 29 ++++++++++++++---------------
>  1 file changed, 14 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/arc/arcpgu_crtc.c b/drivers/gpu/drm/arc/arcpgu_crtc.c
> index ad9a959..99fbdae 100644
> --- a/drivers/gpu/drm/arc/arcpgu_crtc.c
> +++ b/drivers/gpu/drm/arc/arcpgu_crtc.c
> @@ -64,6 +64,19 @@ static void arc_pgu_set_pxl_fmt(struct drm_crtc *crtc)
>  	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
>  };
>  
> +enum drm_mode_status arc_pgu_crtc_mode_valid(struct drm_crtc *crtc,
> +					     const struct drm_display_mode *mode)
> +{
> +	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> +	long rate, clk_rate = mode->clock * 1000;
> +
> +	rate = clk_round_rate(arcpgu->clk, clk_rate);
> +	if (rate != clk_rate)
> +		return MODE_NOCLOCK;
> +
> +	return MODE_OK;
> +}
> +
>  static void arc_pgu_crtc_mode_set_nofb(struct drm_crtc *crtc)
>  {
>  	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> @@ -129,20 +142,6 @@ static void arc_pgu_crtc_disable(struct drm_crtc *crtc)
>  			      ~ARCPGU_CTRL_ENABLE_MASK);
>  }
>  
> -static int arc_pgu_crtc_atomic_check(struct drm_crtc *crtc,
> -				     struct drm_crtc_state *state)
> -{
> -	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> -	struct drm_display_mode *mode = &state->adjusted_mode;
> -	long rate, clk_rate = mode->clock * 1000;
> -
> -	rate = clk_round_rate(arcpgu->clk, clk_rate);
> -	if (rate != clk_rate)
> -		return -EINVAL;
> -
> -	return 0;
> -}
> -
>  static void arc_pgu_crtc_atomic_begin(struct drm_crtc *crtc,
>  				      struct drm_crtc_state *state)
>  {
> @@ -158,6 +157,7 @@ static void arc_pgu_crtc_atomic_begin(struct drm_crtc *crtc,
>  }
>  
>  static const struct drm_crtc_helper_funcs arc_pgu_crtc_helper_funcs = {
> +	.mode_valid	= arc_pgu_crtc_mode_valid,
>  	.mode_set	= drm_helper_crtc_mode_set,
>  	.mode_set_base	= drm_helper_crtc_mode_set_base,
>  	.mode_set_nofb	= arc_pgu_crtc_mode_set_nofb,
> @@ -165,7 +165,6 @@ static void arc_pgu_crtc_atomic_begin(struct drm_crtc *crtc,
>  	.disable	= arc_pgu_crtc_disable,
>  	.prepare	= arc_pgu_crtc_disable,
>  	.commit		= arc_pgu_crtc_enable,
> -	.atomic_check	= arc_pgu_crtc_atomic_check,
>  	.atomic_begin	= arc_pgu_crtc_atomic_begin,
>  };
>  

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ