[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87r2yd1h5x.fsf@free-electrons.com>
Date: Wed, 21 Jun 2017 17:42:18 +0200
From: Gregory CLEMENT <gregory.clement@...e-electrons.com>
To: Marc Zyngier <marc.zyngier@....com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
Cc: Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Kumar Gala <galak@...eaurora.org>,
Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
linux-arm-kernel@...ts.infradead.org,
Nadav Haklai <nadavh@...vell.com>,
Hanna Hawa <hannah@...vell.com>,
Yehuda Yitschak <yehuday@...vell.com>,
Antoine Tenart <antoine.tenart@...e-electrons.com>,
Miquèl Raynal
<miquel.raynal@...e-electrons.com>
Subject: Re: [PATCH v5 0/6] Add support for the ICU unit in Marvell Armada 7K/8K
Hi Marc and Thomas,
On mer., juin 21 2017, Thomas Petazzoni <thomas.petazzoni@...e-electrons.com> wrote:
> Hello,
>
> On Wed, 21 Jun 2017 16:14:21 +0100, Marc Zyngier wrote:
>
>> > Thomas Petazzoni (6):
>> > dt-bindings: interrupt-controller: add DT binding for the Marvell GICP
>> > dt-bindings: interrupt-controller: add DT binding for the Marvell ICU
>> > irqchip: irq-mvebu-gicp: new driver for Marvell GICP
>> > irqchip: irq-mvebu-icu: new driver for Marvell ICU
>> > arm64: marvell: enable ICU and GICP drivers
>> > arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
>> >
>> > .../bindings/interrupt-controller/marvell,gicp.txt | 27 ++
>> > .../bindings/interrupt-controller/marvell,icu.txt | 51 ++++
>> > arch/arm64/Kconfig.platforms | 2 +
>> > arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 7 +
>> > .../boot/dts/marvell/armada-cp110-master.dtsi | 59 +++--
>> > .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 55 ++--
>> > drivers/irqchip/Kconfig | 6 +
>> > drivers/irqchip/Makefile | 2 +
>> > drivers/irqchip/irq-mvebu-gicp.c | 279 ++++++++++++++++++++
>> > drivers/irqchip/irq-mvebu-gicp.h | 12 +
>> > drivers/irqchip/irq-mvebu-icu.c | 289 +++++++++++++++++++++
>> > .../dt-bindings/interrupt-controller/mvebu-icu.h | 15 ++
>> > 12 files changed, 756 insertions(+), 48 deletions(-)
>> > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
>> > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
>> > create mode 100644 drivers/irqchip/irq-mvebu-gicp.c
>> > create mode 100644 drivers/irqchip/irq-mvebu-gicp.h
>> > create mode 100644 drivers/irqchip/irq-mvebu-icu.c
>> > create mode 100644 include/dt-bindings/interrupt-controller/mvebu-icu.h
>> >
>>
>> It all looks good to me. How do we merge this? I take the first five
>> patches and Gregory takes the last one?
>
> I think you should take the first four patches, and Grégory takes the
> last two ones. But I'll let Grégory confirm.
Indeed it makes more sens to merge the patch 4 through the arm-soc
subsystem.
Thanks,
Gregory
>
> Once again, thanks a lot for your help on this series, it's in a much
> better shape now compared to what the original submission was!
>
> Best regards,
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Powered by blists - more mailing lists