linux-kernel - Re: [PATCH v5 0/6] Add support for the ICU unit in Marvell Armada 7K/8K

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170621171809.34bcce1e@windsurf.home>
Date:   Wed, 21 Jun 2017 17:18:09 +0200
From:   Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
To:     Marc Zyngier <marc.zyngier@....com>
Cc:     Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Ian Campbell <ijc+devicetree@...lion.org.uk>,
        Pawel Moll <pawel.moll@....com>,
        Mark Rutland <mark.rutland@....com>,
        Kumar Gala <galak@...eaurora.org>,
        Andrew Lunn <andrew@...n.ch>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Gregory Clement <gregory.clement@...e-electrons.com>,
        linux-arm-kernel@...ts.infradead.org,
        Nadav Haklai <nadavh@...vell.com>,
        Hanna Hawa <hannah@...vell.com>,
        Yehuda Yitschak <yehuday@...vell.com>,
        Antoine Tenart <antoine.tenart@...e-electrons.com>,
        Miquèl Raynal 
        <miquel.raynal@...e-electrons.com>
Subject: Re: [PATCH v5 0/6] Add support for the ICU unit in Marvell Armada
 7K/8K

Hello,

On Wed, 21 Jun 2017 16:14:21 +0100, Marc Zyngier wrote:

> > Thomas Petazzoni (6):
> >   dt-bindings: interrupt-controller: add DT binding for the Marvell GICP
> >   dt-bindings: interrupt-controller: add DT binding for the Marvell ICU
> >   irqchip: irq-mvebu-gicp: new driver for Marvell GICP
> >   irqchip: irq-mvebu-icu: new driver for Marvell ICU
> >   arm64: marvell: enable ICU and GICP drivers
> >   arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
> > 
> >  .../bindings/interrupt-controller/marvell,gicp.txt |  27 ++
> >  .../bindings/interrupt-controller/marvell,icu.txt  |  51 ++++
> >  arch/arm64/Kconfig.platforms                       |   2 +
> >  arch/arm64/boot/dts/marvell/armada-ap806.dtsi      |   7 +
> >  .../boot/dts/marvell/armada-cp110-master.dtsi      |  59 +++--
> >  .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi |  55 ++--
> >  drivers/irqchip/Kconfig                            |   6 +
> >  drivers/irqchip/Makefile                           |   2 +
> >  drivers/irqchip/irq-mvebu-gicp.c                   | 279 ++++++++++++++++++++
> >  drivers/irqchip/irq-mvebu-gicp.h                   |  12 +
> >  drivers/irqchip/irq-mvebu-icu.c                    | 289 +++++++++++++++++++++
> >  .../dt-bindings/interrupt-controller/mvebu-icu.h   |  15 ++
> >  12 files changed, 756 insertions(+), 48 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
> >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
> >  create mode 100644 drivers/irqchip/irq-mvebu-gicp.c
> >  create mode 100644 drivers/irqchip/irq-mvebu-gicp.h
> >  create mode 100644 drivers/irqchip/irq-mvebu-icu.c
> >  create mode 100644 include/dt-bindings/interrupt-controller/mvebu-icu.h
> >   
> 
> It all looks good to me. How do we merge this? I take the first five
> patches and Gregory takes the last one?

I think you should take the first four patches, and Grégory takes the
last two ones. But I'll let Grégory confirm.

Once again, thanks a lot for your help on this series, it's in a much
better shape now compared to what the original submission was!

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com