| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170629081719.GA21557@dtor-ws>
Date: Thu, 29 Jun 2017 01:17:19 -0700
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: Oleksandr Andrushchenko <andr2000@...il.com>
Cc: xen-devel@...ts.xenproject.org, linux-kernel@...r.kernel.org,
joculator@...il.com, al1img@...il.com, vlad.babchuk@...il.com,
andrii.anisov@...il.com, olekstysh@...il.com,
Oleksandr Andrushchenko <oleksandr_andrushchenko@...m.com>
Subject: Re: [PATCH v1] xen/input: add multi-touch support
Hi Oleksandr,
On Fri, Jun 23, 2017 at 09:09:55AM +0300, Oleksandr Andrushchenko wrote:
> + switch (event->mtouch.event_type) {
> + case XENKBD_MT_EV_DOWN:
> + input_mt_report_slot_state(dev, MT_TOOL_FINGER,
> + true);
> + input_event(dev, EV_ABS, ABS_MT_POSITION_X,
> + event->mtouch.u.pos.abs_x);
> + input_event(dev, EV_ABS, ABS_MT_POSITION_Y,
> + event->mtouch.u.pos.abs_y);
> + input_event(dev, EV_ABS, ABS_X,
> + event->mtouch.u.pos.abs_x);
> + input_event(dev, EV_ABS, ABS_Y,
> + event->mtouch.u.pos.abs_y);
I was looking at this and realized that this breaks the single touch
emulation for MT interface: for ST you are supposed to report the oldest
contact, here you report data for all of them. Luckily
input_mt_report_pointer_emulation() that is called as part of
input_mt_sync_frame() reports the correct ABS_X/ABS_Y data and fixes
that for you.
We should simply remove reporting ABS_X/ABS_Y here and in
XENKBD_MT_EV_MOTION as well.
> +
> + input_set_capability(mtouch, EV_KEY, BTN_TOUCH);
> + input_set_abs_params(mtouch, ABS_X,
> + 0, width, 0, 0);
> + input_set_abs_params(mtouch, ABS_Y,
> + 0, height, 0, 0);
> + input_set_abs_params(mtouch, ABS_PRESSURE,
> + 0, 255, 0, 0);
This is done automatically by input_mt_init_slots() when called with
INPUT_MT_DIRECT (as in your case) or INPUT_MT_POINTER, so this can be
removed as well.
Does the patch below (on top of yours) work for you?
Thanks.
--
Dmitry
Input: xen-kbdfront - MT support fixups
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
---
drivers/input/misc/xen-kbdfront.c | 210 +++++++++++++++++++------------------
1 file changed, 109 insertions(+), 101 deletions(-)
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 9fa005038773..fa130e7b734c 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -60,6 +60,112 @@ static void xenkbd_disconnect_backend(struct xenkbd_info *);
* to do that.
*/
+static void xenkbd_handle_motion_event(struct xenkbd_info *info,
+ struct xenkbd_motion *motion)
+{
+ input_report_rel(info->ptr, REL_X, motion->rel_x);
+ input_report_rel(info->ptr, REL_Y, motion->rel_y);
+ if (motion->rel_z)
+ input_report_rel(info->ptr, REL_WHEEL, -motion->rel_z);
+ input_sync(info->ptr);
+}
+
+static void xenkbd_handle_position_event(struct xenkbd_info *info,
+ struct xenkbd_position *pos)
+{
+ input_report_abs(info->ptr, ABS_X, pos->abs_x);
+ input_report_abs(info->ptr, ABS_Y, pos->abs_y);
+ if (pos->rel_z)
+ input_report_rel(info->ptr, REL_WHEEL, -pos->rel_z);
+ input_sync(info->ptr);
+}
+
+static void xenkbd_handle_key_event(struct xenkbd_info *info,
+ struct xenkbd_key *key)
+{
+ struct input_dev *dev;
+
+ if (test_bit(key->keycode, info->ptr->keybit)) {
+ dev = info->ptr;
+ } else if (test_bit(key->keycode, info->kbd->keybit)) {
+ dev = info->kbd;
+ } else {
+ pr_warn("unhandled keycode 0x%x\n", key->keycode);
+ return;
+ }
+
+ input_report_key(dev, key->keycode, key->pressed);
+ input_sync(dev);
+}
+
+static void xenkbd_handle_mt_event(struct xenkbd_info *info,
+ struct xenkbd_mtouch *mtouch)
+{
+ if (unlikely(!info->mtouch))
+ return;
+
+ if (mtouch->contact_id != info->mtouch_cur_contact_id) {
+ info->mtouch_cur_contact_id = mtouch->contact_id;
+ input_mt_slot(info->mtouch, mtouch->contact_id);
+ }
+
+ switch (mtouch->event_type) {
+ case XENKBD_MT_EV_DOWN:
+ input_mt_report_slot_state(info->mtouch, MT_TOOL_FINGER, true);
+ /* fall through */
+
+ case XENKBD_MT_EV_MOTION:
+ input_report_abs(info->mtouch, ABS_MT_POSITION_X,
+ mtouch->u.pos.abs_x);
+ input_report_abs(info->mtouch, ABS_MT_POSITION_Y,
+ mtouch->u.pos.abs_y);
+ break;
+
+ case XENKBD_MT_EV_SHAPE:
+ input_report_abs(info->mtouch, ABS_MT_TOUCH_MAJOR,
+ mtouch->u.shape.major);
+ input_report_abs(info->mtouch, ABS_MT_TOUCH_MINOR,
+ mtouch->u.shape.minor);
+ break;
+
+ case XENKBD_MT_EV_ORIENT:
+ input_report_abs(info->mtouch, ABS_MT_ORIENTATION,
+ mtouch->u.orientation);
+ break;
+
+ case XENKBD_MT_EV_UP:
+ input_mt_report_slot_state(info->mtouch, MT_TOOL_FINGER, false);
+ break;
+
+ case XENKBD_MT_EV_SYN:
+ input_mt_sync_frame(info->mtouch);
+ input_sync(info->mtouch);
+ break;
+ }
+}
+
+static void xenkbd_handle_event(struct xenkbd_info *info,
+ union xenkbd_in_event *event)
+{
+ switch (event->type) {
+ case XENKBD_TYPE_MOTION:
+ xenkbd_handle_motion_event(info, &event->motion);
+ break;
+
+ case XENKBD_TYPE_KEY:
+ xenkbd_handle_key_event(info, &event->key);
+ break;
+
+ case XENKBD_TYPE_POS:
+ xenkbd_handle_position_event(info, &event->pos);
+ break;
+
+ case XENKBD_TYPE_MTOUCH:
+ xenkbd_handle_mt_event(info, &event->mtouch);
+ break;
+ }
+}
+
static irqreturn_t input_handler(int rq, void *dev_id)
{
struct xenkbd_info *info = dev_id;
@@ -70,98 +176,8 @@ static irqreturn_t input_handler(int rq, void *dev_id)
if (prod == page->in_cons)
return IRQ_HANDLED;
rmb(); /* ensure we see ring contents up to prod */
- for (cons = page->in_cons; cons != prod; cons++) {
- union xenkbd_in_event *event;
- struct input_dev *dev;
- event = &XENKBD_IN_RING_REF(page, cons);
-
- dev = info->ptr;
- switch (event->type) {
- case XENKBD_TYPE_MOTION:
- input_report_rel(dev, REL_X, event->motion.rel_x);
- input_report_rel(dev, REL_Y, event->motion.rel_y);
- if (event->motion.rel_z)
- input_report_rel(dev, REL_WHEEL,
- -event->motion.rel_z);
- break;
- case XENKBD_TYPE_KEY:
- dev = NULL;
- if (test_bit(event->key.keycode, info->kbd->keybit))
- dev = info->kbd;
- if (test_bit(event->key.keycode, info->ptr->keybit))
- dev = info->ptr;
- if (dev)
- input_report_key(dev, event->key.keycode,
- event->key.pressed);
- else
- pr_warn("unhandled keycode 0x%x\n",
- event->key.keycode);
- break;
- case XENKBD_TYPE_POS:
- input_report_abs(dev, ABS_X, event->pos.abs_x);
- input_report_abs(dev, ABS_Y, event->pos.abs_y);
- if (event->pos.rel_z)
- input_report_rel(dev, REL_WHEEL,
- -event->pos.rel_z);
- break;
- case XENKBD_TYPE_MTOUCH:
- dev = info->mtouch;
- if (unlikely(!dev))
- break;
- if (event->mtouch.contact_id !=
- info->mtouch_cur_contact_id) {
- info->mtouch_cur_contact_id =
- event->mtouch.contact_id;
- input_mt_slot(dev, event->mtouch.contact_id);
- }
- switch (event->mtouch.event_type) {
- case XENKBD_MT_EV_DOWN:
- input_mt_report_slot_state(dev, MT_TOOL_FINGER,
- true);
- input_event(dev, EV_ABS, ABS_MT_POSITION_X,
- event->mtouch.u.pos.abs_x);
- input_event(dev, EV_ABS, ABS_MT_POSITION_Y,
- event->mtouch.u.pos.abs_y);
- input_event(dev, EV_ABS, ABS_X,
- event->mtouch.u.pos.abs_x);
- input_event(dev, EV_ABS, ABS_Y,
- event->mtouch.u.pos.abs_y);
- break;
- case XENKBD_MT_EV_UP:
- input_mt_report_slot_state(dev, MT_TOOL_FINGER,
- false);
- break;
- case XENKBD_MT_EV_MOTION:
- input_event(dev, EV_ABS, ABS_MT_POSITION_X,
- event->mtouch.u.pos.abs_x);
- input_event(dev, EV_ABS, ABS_MT_POSITION_Y,
- event->mtouch.u.pos.abs_y);
- input_event(dev, EV_ABS, ABS_X,
- event->mtouch.u.pos.abs_x);
- input_event(dev, EV_ABS, ABS_Y,
- event->mtouch.u.pos.abs_y);
- break;
- case XENKBD_MT_EV_SYN:
- input_mt_sync_frame(dev);
- break;
- case XENKBD_MT_EV_SHAPE:
- input_event(dev, EV_ABS, ABS_MT_TOUCH_MAJOR,
- event->mtouch.u.shape.major);
- input_event(dev, EV_ABS, ABS_MT_TOUCH_MINOR,
- event->mtouch.u.shape.minor);
- break;
- case XENKBD_MT_EV_ORIENT:
- input_event(dev, EV_ABS, ABS_MT_ORIENTATION,
- event->mtouch.u.orientation);
- break;
- }
- /* only report syn when requested */
- if (event->mtouch.event_type != XENKBD_MT_EV_SYN)
- dev = NULL;
- }
- if (dev)
- input_sync(dev);
- }
+ for (cons = page->in_cons; cons != prod; cons++)
+ xenkbd_handle_event(info, &XENKBD_IN_RING_REF(page, cons));
mb(); /* ensure we got ring contents */
page->in_cons = cons;
notify_remote_via_irq(info->irq);
@@ -216,7 +232,7 @@ static int xenkbd_probe(struct xenbus_device *dev,
ret = xenbus_write(XBT_NIL, dev->nodename,
XENKBD_FIELD_REQ_MTOUCH, "1");
if (ret) {
- pr_warning("xenkbd: can't request multi-touch");
+ pr_warn("xenkbd: can't request multi-touch");
touch = 0;
}
}
@@ -301,14 +317,6 @@ static int xenkbd_probe(struct xenbus_device *dev,
mtouch->id.vendor = 0x5853;
mtouch->id.product = 0xfffd;
- input_set_capability(mtouch, EV_KEY, BTN_TOUCH);
- input_set_abs_params(mtouch, ABS_X,
- 0, width, 0, 0);
- input_set_abs_params(mtouch, ABS_Y,
- 0, height, 0, 0);
- input_set_abs_params(mtouch, ABS_PRESSURE,
- 0, 255, 0, 0);
-
input_set_abs_params(mtouch, ABS_MT_TOUCH_MAJOR,
0, 255, 0, 0);
input_set_abs_params(mtouch, ABS_MT_POSITION_X,
Powered by blists - more mailing lists