[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170705140305.pixlhd65xu6g3nlf@rob-hp-laptop>
Date: Wed, 5 Jul 2017 09:03:05 -0500
From: Rob Herring <robh@...nel.org>
To: Hugues Fruchet <hugues.fruchet@...com>
Cc: Sylwester Nawrocki <sylvester.nawrocki@...il.com>,
" H. Nikolaus Schaller" <hns@...delico.com>,
Guennadi Liakhovetski <g.liakhovetski@....de>,
Mark Rutland <mark.rutland@....com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hverkuil@...all.nl>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Yannick Fertre <yannick.fertre@...com>
Subject: Re: [PATCH v2 1/7] DT bindings: add bindings for ov965x camera module
On Mon, Jul 03, 2017 at 11:16:02AM +0200, Hugues Fruchet wrote:
> From: "H. Nikolaus Schaller" <hns@...delico.com>
>
> This adds documentation of device tree bindings
> for the OV965X family camera sensor module.
>
> Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
> Signed-off-by: Hugues Fruchet <hugues.fruchet@...com>
> ---
> .../devicetree/bindings/media/i2c/ov965x.txt | 45 ++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov965x.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov965x.txt b/Documentation/devicetree/bindings/media/i2c/ov965x.txt
> new file mode 100644
> index 0000000..4ceb727
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov965x.txt
> @@ -0,0 +1,45 @@
> +* Omnivision OV9650/9652/9655 CMOS sensor
> +
> +The Omnivision OV965x sensor support multiple resolutions output, such as
> +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
> +output format.
> +
> +Required Properties:
> +- compatible: should be one of
> + "ovti,ov9650"
> + "ovti,ov9652"
> + "ovti,ov9655"
> +- clocks: reference to the mclk input clock.
> +
> +Optional Properties:
> +- resetb-gpios: reference to the GPIO connected to the RESETB pin, if any,
> + polarity is active low.
reset-gpios
> +- pwdn-gpios: reference to the GPIO connected to the PWDN pin, if any,
> + polarity is active high.
powerdown-gpios
Both are standardish names for such signals.
Rob
Powered by blists - more mailing lists