[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6fa2e20e-ac19-0296-d481-f0cb4aa4a231@st.com>
Date: Wed, 5 Jul 2017 14:48:15 +0000
From: Hugues FRUCHET <hugues.fruchet@...com>
To: Rob Herring <robh@...nel.org>
CC: Sylwester Nawrocki <sylvester.nawrocki@...il.com>,
"H. Nikolaus Schaller" <hns@...delico.com>,
Guennadi Liakhovetski <g.liakhovetski@....de>,
"Mark Rutland" <mark.rutland@....com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre TORGUE <alexandre.torgue@...com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hverkuil@...all.nl>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Yannick FERTRE <yannick.fertre@...com>
Subject: Re: [PATCH v2 1/7] DT bindings: add bindings for ov965x camera module
On 07/05/2017 04:03 PM, Rob Herring wrote:
> On Mon, Jul 03, 2017 at 11:16:02AM +0200, Hugues Fruchet wrote:
>> From: "H. Nikolaus Schaller" <hns@...delico.com>
>>
>> This adds documentation of device tree bindings
>> for the OV965X family camera sensor module.
>>
>> Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
>> Signed-off-by: Hugues Fruchet <hugues.fruchet@...com>
>> ---
>> .../devicetree/bindings/media/i2c/ov965x.txt | 45 ++++++++++++++++++++++
>> 1 file changed, 45 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov965x.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/ov965x.txt b/Documentation/devicetree/bindings/media/i2c/ov965x.txt
>> new file mode 100644
>> index 0000000..4ceb727
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/ov965x.txt
>> @@ -0,0 +1,45 @@
>> +* Omnivision OV9650/9652/9655 CMOS sensor
>> +
>> +The Omnivision OV965x sensor support multiple resolutions output, such as
>> +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
>> +output format.
>> +
>> +Required Properties:
>> +- compatible: should be one of
>> + "ovti,ov9650"
>> + "ovti,ov9652"
>> + "ovti,ov9655"
>> +- clocks: reference to the mclk input clock.
>> +
>> +Optional Properties:
>> +- resetb-gpios: reference to the GPIO connected to the RESETB pin, if any,
>> + polarity is active low.
>
> reset-gpios
>
>> +- pwdn-gpios: reference to the GPIO connected to the PWDN pin, if any,
>> + polarity is active high.
>
> powerdown-gpios
>
> Both are standardish names for such signals.
>
> Rob
Thanks Rob, I will fix,
Hugues.
>
Powered by blists - more mailing lists