Message-ID: <20170717155144.GF32632@pathway.suse.cz>
Date:   Mon, 17 Jul 2017 17:51:44 +0200
From:   Petr Mladek <pmladek@...e.com>
To:     Joe Lawrence <joe.lawrence@...hat.com>
Cc:     live-patching@...r.kernel.org, linux-kernel@...r.kernel.org,
        Josh Poimboeuf <jpoimboe@...hat.com>,
        Jessica Yu <jeyu@...nel.org>, Jiri Kosina <jikos@...nel.org>,
        Miroslav Benes <mbenes@...e.cz>,
        Chris J Arges <chris.j.arges@...onical.com>
Subject: Re: [PATCH] livepatch: add (un)patch hooks

On Wed 2017-07-12 10:10:00, Joe Lawrence wrote:
> When the livepatch core executes klp_(un)patch_object, call out to a
> livepatch-module specified array of callback hooks.  These hooks provide
> a notification mechanism for livepatch modules when klp_objects are
> (un)patching. This may be most interesting when another kernel module
> is a klp_object target and the livepatch module needs to execute code
> after the target is loaded, but before its module_init code is run.
> 
> The patch-hook executes right before patching objects and the
> unpatch-hook executes right after unpatching objects.
> 
> diff --git a/Documentation/livepatch/hooks.txt b/Documentation/livepatch/hooks.txt
> new file mode 100644
> index 000000000000..ef18101a3b90
> --- /dev/null
> +++ b/Documentation/livepatch/hooks.txt
> @@ -0,0 +1,98 @@
> +(Un)patching Hooks
> +==================
> +
> +Livepatching (un)patch-hooks provide a mechanism to register and execute
> +a set of callback functions when the kernel's livepatching core performs
> +an (un)patching operation on a given kernel object.

The above is correct but it is a bit hard to understand what it really
means. Josh's discussion about the naming suggests that I am not the only
one who is confused ;-)

We need to make it clear that there are 4 basic situations
where these hooks are called:

  + patch hook is called when:

	1. livepatch is being enabled and object is loaded
	2. livepatch is enabled and object is being loaded

  + unpatch hook is called when

	3. livepatch is enabled and object is being removed
	4. livepatch is being disabled and object is loaded

Note that this document mostly talks only about the two situations
when the livepatch is enabled and the patched object is being
loaded or removed.

But it is still quite tricky to understand what can be modified
a safe way. We need to be careful about different things
in the different situations.

If the patched object is beeing added/removed, we know that its
code is not being used but the code from the rest of the patch
is already in use. The module is not yet or not longer properly
initialized. Therefore it might be too early or too late to
register or unregister any of its services in the rest of
the system. Basically it limits the changes only to
to the object (module) itself.

If the patch is being enabled, it is another story. The object
is already initialized and its old code is used but the new
code from the patch is not yet or not longer used. It suggests
that it might be safe to do some changes related to the
new code in the patch. But we need to be careful because
the system is using the old code.


But there are actually 4 more situations. If we use the consistency
model, different parts of the system might use different code.
I mean that:

  + patch hook is called also when:

     + livepatch is being enabled and object is being loaded
     + livepatch is being disabled and object is being loaded

  + unpatch hook is called when:

     + livepatch is being enabled and object is being removed
     + livepatch is being disabled and object is being removed


It is a bit easier if you run the hook for vmlinux
because it is always running.

I am sorry for the long mail. But I have really troubles to
understand and describe what can be done with these hooks
a safe way.

It might help if you share some real-life examples.


> +The hooks are provided and registered by a livepatch module as part of
> +klp_objects that make up its klp_patch structure.  Both patch and
> +unpatch-hook function signatures accept a pointer to a klp_object
> +argument and return an integer status, ie:

I would put this into separate section and make it clear
that it is a sample code.

> +  static int patch_hook(struct klp_object *obj)
> +  {
> +  	/* ... */
> +  }
> +  static int unpatch_hook(struct klp_object *obj)
> +  {
> +  	/* ... */
> +  }
> +
> +  static struct klp_hook patch_hooks[] = {
> +  	{
> +  		.hook = patch_hook,
> +  	}, { }
> +  };
> +  static struct klp_hook unpatch_hooks[] = {
> +  	{
> +  		.hook = unpatch_hook,
> +  	}, { }
> +  };
> +
> +  static struct klp_object objs[] = {
> +  	{
> +  		/* ... */
> +  		.patch_hooks = patch_hooks,
> +  		.unpatch_hooks = unpatch_hooks,
> +  	}, { }
> +  };
> +
> +  static struct klp_patch patch = {
> +  	.mod = THIS_MODULE,
> +  	.objs = objs,
> +  };
> +
> +If a hook returns non-zero status, the livepatching core will log a
> +hook failure warning message.

> +Multiple (un)patch-hooks may be registered per klp_object.  Each hook
> +will execute regardless of any previously executed hook's non-zero
> +return status.

We should pass the error down the stack. If will prevent either the
patch or the patched module of being loaded. Of course, we could
not do much if the patch or the patched object is being removed.


> +Hooks are optional.  The livepatching core will not execute any
> +callbacks for an empty klp_hook.hook array or a NULL klp_hook.hook
> +value.
> +
> +
> +For module targets
> +------------------
> +
> +On the other hand, if a target kernel module is already present when a
> +livepatch is loading, then the corresponding patch hook(s) will execute
> +as soon as the livepatching kernel core enables the livepatch.
>
> +It may be useful for hooks to inspect the module state of the klp_object
> +it is passed (i.e. obj->mod->state).  Patch hooks can expect to see
> +modules in MODULE_STATE_LIVE and MODULE_STATE_COMING states.  Unpatch
> +hooks can expect modules in MODULE_STATE_LIVE and MODULE_STATE_GOING
> +states.

This actualy talks about the other situations but it is well hidden
and kind of cryptic.


> diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c
> index b9628e43c78f..ff3685470057 100644
> --- a/kernel/livepatch/core.c
> +++ b/kernel/livepatch/core.c
> @@ -49,11 +49,6 @@
>  
>  static struct kobject *klp_root_kobj;
>  
> -static bool klp_is_module(struct klp_object *obj)
> -{
> -	return obj->name;
> -}
> -
>  static bool klp_is_object_loaded(struct klp_object *obj)
>  {
>  	return !obj->name || obj->mod;
> diff --git a/kernel/livepatch/patch.c b/kernel/livepatch/patch.c
> index 52c4e907c14b..c8084a18ddb7 100644
> --- a/kernel/livepatch/patch.c
> +++ b/kernel/livepatch/patch.c
> @@ -235,25 +235,60 @@ static int klp_patch_func(struct klp_func *func)
>  	return ret;
>  }
>  
> +/**
> + * klp_run_hook - execute a given klp_hook callback
> + * @hook:	callback hook
> + * @obj:	kernel object that has been hooked
> + *
> + * Return: return value from hook, or 0 if none is currently associated
> + */
> +static int klp_run_hook(struct klp_hook *hook, struct klp_object *obj)
> +{
> +	if (hook && hook->hook)
> +		return (*hook->hook)(obj);
> +
> +	return 0;
> +}
> +
>  void klp_unpatch_object(struct klp_object *obj)
>  {
>  	struct klp_func *func;
> +	struct klp_hook *hook;
> +	int ret;
>  
>  	klp_for_each_func(obj, func)
>  		if (func->patched)
>  			klp_unpatch_func(func);
>  
>  	obj->patched = false;
>
> +
> +	klp_for_each_unpatch_hook(obj, hook) {
> +		ret = klp_run_hook(hook, obj);
> +		if (ret) {
> +			pr_warn("unpatch hook '%p' failed for object '%s'\n",
> +				hook, klp_is_module(obj) ? obj->name : "vmlinux");
> +		}
> +	}
> +

It probably does not matter but I would move

	obj->patched = false;

here. Otherwise, the hooks will see "false" in both cases. In each,
case it looks more symetric.

Or is there any reason behind the given order?

>  }
>  
>  int klp_patch_object(struct klp_object *obj)
>  {
>  	struct klp_func *func;
> +	struct klp_hook *hook;
>  	int ret;
>  
>  	if (WARN_ON(obj->patched))
>  		return -EINVAL;
>  
> +	klp_for_each_patch_hook(obj, hook) {
> +		ret = klp_run_hook(hook, obj);
> +		if (ret) {
> +			pr_warn("patch hook '%p' failed for object '%s'\n",
> +				hook, klp_is_module(obj) ? obj->name : "vmlinux");
> +		}
> +	}
> +
> +
>  	klp_for_each_func(obj, func) {
>  		ret = klp_patch_func(func);
>  		if (ret) {


Thaks a lot for looking at this. I guess that it is useful. But
it is also pretty dangerous at the same moment. I would like to
understand all consequences/usecases before we add this API.

Best Regards,
Petr

Powered by blists - more mailing lists