lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 17 Jul 2017 18:03:01 +0200 From: Jerome Brunet <jbrunet@...libre.com> To: Kevin Hilman <khilman@...libre.com>, Carlo Caione <carlo@...one.org> Cc: Jerome Brunet <jbrunet@...libre.com>, linux-amlogic@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org Subject: [PATCH RESEND] ARM64: dts: meson-gxl-s905x-libretech-cc: fixup board definition The libretech CC derives less from the p212 than initially thought. Several voltage regulators are different and the capabilities of the sdcard and emmc also differ. Deriving from the p212 is not convient anymore so the libretech is now derived from s905x definition directly. Fixes: cd84aff1d981 ("ARM64: dts: meson-gxl: Add Libre Technology CC support") Signed-off-by: Jerome Brunet <jbrunet@...libre.com> --- .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 103 ++++++++++++++++++--- 1 file changed, 91 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 890821d6e52b..266fbcf3e47f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -10,12 +10,20 @@ #include <dt-bindings/input/input.h> -#include "meson-gxl-s905x-p212.dtsi" +#include "meson-gxl-s905x.dtsi" / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; model = "Libre Technology CC"; + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cvbs-connector { compatible = "composite-video-connector"; @@ -26,6 +34,11 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -53,6 +66,39 @@ linux,default-trigger = "heartbeat"; }; }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_card: regulator-vcc-card { + compatible = "regulator-gpio"; + + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cvbs_vdac_port { @@ -61,6 +107,16 @@ }; }; +ðmac { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; @@ -73,20 +129,43 @@ }; }; -/* - * The following devices exists but are exposed on the general - * purpose GPIO header. End user may well decide to use those pins - * for another purpose - */ +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; -&sd_emmc_a { - status = "disabled"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_card>; }; -&uart_A { - status = "disabled"; +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <50000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; }; -&wifi32k { - status = "disabled"; +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; -- 2.9.4
Powered by blists - more mailing lists