lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1501049163-18892-2-git-send-email-xuejiancheng@hisilicon.com>
Date:   Wed, 26 Jul 2017 14:06:00 +0800
From:   Jiancheng Xue <xuejiancheng@...ilicon.com>
To:     <robh+dt@...nel.org>, <kishon@...com>, <xuwei5@...ilicon.com>,
        <catalin.marinas@....com>
CC:     <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <hermit.wangheming@...ilicon.com>, <project-aspen-dev@...aro.org>,
        Jiancheng Xue <xuejiancheng@...ilicon.com>
Subject: [PATCH v2 1/4] dt-bindings: phy-hisi-inno-usb2: add support for hisi-inno-usb2 phy

Add support for hisi-inno-usb2 phy.

Signed-off-by: Jiancheng Xue <xuejiancheng@...ilicon.com>
---
 .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
new file mode 100644
index 0000000..417eeaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
@@ -0,0 +1,31 @@
+HiSilicon INNO USB2 PHY
+-----------------------
+Required properties:
+- compatible: Should be one of the following strings:
+		"hisilicon,inno-usb2-phy",
+		"hisilicon,hi3798cv200-usb2-phy",
+- #phy-cells: Shall be 0.
+- hisilicon,peripheral-syscon: Phandle of syscon used to control phy.
+- hisilicon,phycon-reg: Offset of the phy control register in the syscon.
+- hisilicon,port-num: Number of utmi ports. Range [1,2].
+- clocks: Phandle and clock specifier pair for reference clock utmi_refclk.
+- resets: List of phandle and reset specifier pairs for each reset signal
+in reset-names.
+- reset-names: Shall be "power_on", "utmi0", "utmi1". Thereinto, utmi[n] is
+required only if port[n] exists.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+usb2_phy: phy {
+		 compatible = "hisilicon,inno-usb2-phy";
+		 #phy-cells = <0>;
+		 hisilicon,peripheral-syscon = <&peri_ctrl>;
+		 hisilicon,phycon-reg = <0x120>;
+		 hisilicon,port-num = <2>;
+		 clocks = <&crg USB2_PHY_UTMI_REF_CLK>;
+		 resets = <&crg 0xbc 2>,
+			  <&crg 0xbc 8>,
+			  <&crg 0xbc 9>,
+		 reset-names = "power_on", "utmi0", "utmi1";
+	 };
-- 
1.9.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ