[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <06154871-a821-edab-23d8-340c5b0f5081@ti.com>
Date: Wed, 2 Aug 2017 10:42:06 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Chanwoo Choi <cw00.choi@...sung.com>, <balbi@...nel.org>,
<gregkh@...uxfoundation.org>
CC: <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-usb@...r.kernel.org>, <chanwoo@...nel.org>,
<myungjoo.ham@...sung.com>, <linux-rockchip@...ts.infradead.org>
Subject: Re: [PATCH 2/5] phy: rockchip-inno-usb2: Replace the extcon API
On Monday 17 July 2017 06:50 AM, Chanwoo Choi wrote:
> This patch uses the resource-managed extcon API for extcon_register_notifier()
> and replaces the deprecated extcon API as following:
> - extcon_get_cable_state_() -> extcon_get_state()
> - extcon_set_cable_state_() -> extcon_set_state_sync()
>
> Cc: linux-rockchip@...ts.infradead.org
> acked-by: Kishon Vijay Abraham I <kishon@...com>
^
should be 'A' here.
-Kishon
> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
> ---
> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index 626883d9d176..ef033089b7a0 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -545,7 +545,7 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
> rockchip_usb2phy_power_off(rport->phy);
> /* fall through */
> case OTG_STATE_B_IDLE:
> - if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) > 0) {
> + if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) > 0) {
> dev_dbg(&rport->phy->dev, "usb otg host connect\n");
> rport->state = OTG_STATE_A_HOST;
> rockchip_usb2phy_power_on(rport->phy);
> @@ -598,7 +598,7 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
> rport->vbus_attached = vbus_attach;
>
> if (notify_charger && rphy->edev) {
> - extcon_set_cable_state_(rphy->edev,
> + extcon_set_state_sync(rphy->edev,
> cable, vbus_attach);
> if (cable == EXTCON_CHG_USB_SDP)
> extcon_set_state_sync(rphy->edev,
> @@ -619,7 +619,7 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
> sch_work = true;
> break;
> case OTG_STATE_A_HOST:
> - if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) == 0) {
> + if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) == 0) {
> dev_dbg(&rport->phy->dev, "usb otg host disconnect\n");
> rport->state = OTG_STATE_B_IDLE;
> rockchip_usb2phy_power_off(rport->phy);
> @@ -1006,8 +1006,8 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> if (!IS_ERR(rphy->edev)) {
> rport->event_nb.notifier_call = rockchip_otg_event;
>
> - ret = extcon_register_notifier(rphy->edev, EXTCON_USB_HOST,
> - &rport->event_nb);
> + ret = devm_extcon_register_notifier(rphy->dev, rphy->edev,
> + EXTCON_USB_HOST, &rport->event_nb);
> if (ret)
> dev_err(rphy->dev, "register USB HOST notifier failed\n");
> }
>
Powered by blists - more mailing lists