[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170810000831.mtj5w4sgwa56ja24@rob-hp-laptop>
Date: Wed, 9 Aug 2017 19:08:31 -0500
From: Rob Herring <robh@...nel.org>
To: Vignesh R <vigneshr@...com>
Cc: Marek Vasut <marek.vasut@...il.com>,
Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
Santosh Shilimkar <ssantosh@...nel.org>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
linux-mtd@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/7] mtd: spi-nor: cadence-quadspi: add a delay in write
sequence
On Tue, Aug 01, 2017 at 10:24:28AM +0530, Vignesh R wrote:
> As per 66AK2G02 TRM[1] SPRUHY8F section 11.15.5.3 Indirect Access
> Controller programming sequence, a delay equal to couple QSPI master
> clock(~5ns) is required after setting CQSPI_REG_INDIRECTWR_START bit and
> writing data to the flash. Add a new compatible to handle the couple of
> cycles of delay required in the indirect write sequence, since this
> delay is specific to TI 66AK2G SoC.
>
> [1]http://www.ti.com/lit/ug/spruhy8f/spruhy8f.pdf
>
> Signed-off-by: Vignesh R <vigneshr@...com>
> ---
> Documentation/devicetree/bindings/mtd/cadence-quadspi.txt | 1 +
> drivers/mtd/spi-nor/cadence-quadspi.c | 13 +++++++++++++
> 2 files changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
> index f248056da24c..fdd511a83511 100644
> --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
> +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
> @@ -2,6 +2,7 @@
>
> Required properties:
> - compatible : Should be "cdns,qspi-nor".
> + Should be "ti,k2g-qspi" for TI 66AK2G platform.
Also, this doesn't indicate that "cdns,qspi-nor" is a fallback as you
have in the dts files. Reformat to 1 valid combination per line.
> - reg : Contains two entries, each of which is a tuple consisting of a
> physical address and length. The first entry is the address and
> length of the controller register set. The second entry is the
Powered by blists - more mailing lists