[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <598BA42F.8060808@samsung.com>
Date: Thu, 10 Aug 2017 09:09:19 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: balbi@...nel.org
Cc: kishon@...com, gregkh@...uxfoundation.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-usb@...r.kernel.org, chanwoo@...nel.org,
myungjoo.ham@...sung.com,
Raviteja Garimella <raviteja.garimella@...adcom.com>
Subject: Re: [PATCH v2 4/5] usb: gadget: udc: Replace the deprecated extcon
API
Ping.
Hi Felipe,
I sent the first patch[1] more than three weeks ago.
But I didn't receive the any review.
[1] https://lkml.org/lkml/2017/7/16/523
This patch is very simple. After finishing the review
I'll remove the deprecated extcon API and then send
the immutable branch to both phy and usb maintainer.
Usually, I send the extcon's pull request to the GregKH
for the next merge after releasing 4.x-rc6.
(4.x-rc4 was released)
Please review this patch.
On 2017년 08월 07일 11:07, Chanwoo Choi wrote:
> Dear Felipe,
>
> Could you please review this patch?
> I hope to remove the deprecated extcon API.
>
> Regards,
> Chanwoo Choi
>
> On 2017년 08월 03일 17:20, Chanwoo Choi wrote:
>> This patch replaces the deprecated extcon API as following:
>> - extcon_get_cable_state_() -> extcon_get_state()
>>
>> Cc: Felipe Balbi <balbi@...nel.org>
>> Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
>> Cc: Raviteja Garimella <raviteja.garimella@...adcom.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
>> ---
>> drivers/usb/gadget/udc/snps_udc_plat.c | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
>> index 2e11f19e07ae..0ce7b3ba60ff 100644
>> --- a/drivers/usb/gadget/udc/snps_udc_plat.c
>> +++ b/drivers/usb/gadget/udc/snps_udc_plat.c
>> @@ -184,7 +184,7 @@ static int udc_plat_probe(struct platform_device *pdev)
>> goto exit_phy;
>> }
>>
>> - ret = extcon_get_cable_state_(udc->edev, EXTCON_USB);
>> + ret = extcon_get_state(udc->edev, EXTCON_USB);
>> if (ret < 0) {
>> dev_err(dev, "Can't get cable state\n");
>> goto exit_extcon;
>> @@ -273,7 +273,7 @@ static int udc_plat_suspend(struct device *dev)
>> udc = dev_get_drvdata(dev);
>> stop_udc(udc);
>>
>> - if (extcon_get_cable_state_(udc->edev, EXTCON_USB) > 0) {
>> + if (extcon_get_state(udc->edev, EXTCON_USB) > 0) {
>> dev_dbg(udc->dev, "device -> idle\n");
>> stop_udc(udc);
>> }
>> @@ -303,7 +303,7 @@ static int udc_plat_resume(struct device *dev)
>> return ret;
>> }
>>
>> - if (extcon_get_cable_state_(udc->edev, EXTCON_USB) > 0) {
>> + if (extcon_get_state(udc->edev, EXTCON_USB) > 0) {
>> dev_dbg(udc->dev, "idle -> device\n");
>> start_udc(udc);
>> }
>>
>
>
>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
Powered by blists - more mailing lists