[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170830094814.17758-4-hdegoede@redhat.com>
Date: Wed, 30 Aug 2017 11:48:06 +0200
From: Hans de Goede <hdegoede@...hat.com>
To: Darren Hart <dvhart@...radead.org>,
Andy Shevchenko <andy@...radead.org>,
Wolfram Sang <wsa@...-dreams.de>,
Sebastian Reichel <sre@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Guenter Roeck <linux@...ck-us.net>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Cc: Hans de Goede <hdegoede@...hat.com>,
platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-i2c@...r.kernel.org, Liam Breck <liam@...workimprov.net>,
Tony Lindgren <tony@...mide.com>, linux-pm@...r.kernel.org,
devel@...verdev.osuosl.org,
"Yueyao (Nathan) Zhu" <yueyao@...gle.com>
Subject: [PATCH v3 03/11] staging: typec: fusb302: Set max supply voltage to 5V
Anything higher then 5V may damage hardware not capable of it, so
the only sane default here is 5V. If a board is able to handle a
higher voltage that should come from board specific data such as
device-tree and not be hard coded into the fusb302 code.
Cc: "Yueyao (Nathan) Zhu" <yueyao@...gle.com>
Signed-off-by: Hans de Goede <hdegoede@...hat.com>
---
drivers/staging/typec/fusb302/fusb302.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c
index 03a3809d18f0..6baed06a3c0d 100644
--- a/drivers/staging/typec/fusb302/fusb302.c
+++ b/drivers/staging/typec/fusb302/fusb302.c
@@ -1187,9 +1187,9 @@ static const struct tcpc_config fusb302_tcpc_config = {
.nr_src_pdo = ARRAY_SIZE(src_pdo),
.snk_pdo = snk_pdo,
.nr_snk_pdo = ARRAY_SIZE(snk_pdo),
- .max_snk_mv = 9000,
+ .max_snk_mv = 5000,
.max_snk_ma = 3000,
- .max_snk_mw = 27000,
+ .max_snk_mw = 15000,
.operating_snk_mw = 2500,
.type = TYPEC_PORT_DRP,
.default_role = TYPEC_SINK,
--
2.13.4
Powered by blists - more mailing lists