| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a4aeec52-9d95-5f66-fa02-27f493a9c222@roeck-us.net>
Date: Wed, 30 Aug 2017 06:50:04 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Hans de Goede <hdegoede@...hat.com>,
Darren Hart <dvhart@...radead.org>,
Andy Shevchenko <andy@...radead.org>,
Wolfram Sang <wsa@...-dreams.de>,
Sebastian Reichel <sre@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Cc: platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-i2c@...r.kernel.org, Liam Breck <liam@...workimprov.net>,
Tony Lindgren <tony@...mide.com>, linux-pm@...r.kernel.org,
devel@...verdev.osuosl.org, Rob Herring <robh+dt@...nel.org>,
Frank Rowand <frowand.list@...il.com>,
devicetree@...r.kernel.org,
"Yueyao (Nathan) Zhu" <yueyao@...gle.com>
Subject: Re: [PATCH v3 04/11] staging: typec: fusb302: Get max snk mv/ma/mw
from device-properties
On 08/30/2017 02:48 AM, Hans de Goede wrote:
> This is board specific info so it should come from board config, such
> as devicetree.
>
> I've chosen to prefix these with "fcs," treating them as fusb302 driver
> specific for now. We may want to revisit this and replace these with
> properties which are part of a (to be written) generic type-c controller
> devicetree binding.
>
> Since this commit adds new dt-properties it also adds devicetree-bindings
> documentation (which so far was absent for the fusb302 driver).
>
> Cc: Rob Herring <robh+dt@...nel.org>
> Cc: Frank Rowand <frowand.list@...il.com>
> Cc: devicetree@...r.kernel.org
> Cc: "Yueyao (Nathan) Zhu" <yueyao@...gle.com>
> Signed-off-by: Hans de Goede <hdegoede@...hat.com>
> Acked-by: Rob Herring <robh@...nel.org>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
> ---
> Changes in v2:
> -Use micro... instead of mili...
> -Add devicetree bindings documentation
>
> Changes in v3:
> -Use sink rather then snk in property names
> -Add Rob's Acked-by
> ---
> .../devicetree/bindings/usb/fcs,fusb302.txt | 29 ++++++++++++++++++++++
> drivers/staging/typec/fusb302/TODO | 4 +++
> drivers/staging/typec/fusb302/fusb302.c | 18 +++++++++++++-
> 3 files changed, 50 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/usb/fcs,fusb302.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
> new file mode 100644
> index 000000000000..472facfa5a71
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
> @@ -0,0 +1,29 @@
> +Fairchild FUSB302 Type-C Port controllers
> +
> +Required properties :
> +- compatible : "fcs,fusb302"
> +- reg : I2C slave address
> +- interrupts : Interrupt specifier
> +
> +Optional properties :
> +- fcs,max-sink-microvolt : Maximum voltage to negotiate when configured as sink
> +- fcs,max-sink-microamp : Maximum current to negotiate when configured as sink
> +- fcs,max-sink-microwatt : Maximum power to negotiate when configured as sink
> + If this is less then max-sink-microvolt *
> + max-sink-microamp then the configured current will
> + be clamped.
> +- fcs,operating-sink-microwatt :
> + Minimum amount of power accepted from a sink
> + when negotiating
> +
> +Example:
> +
> +fusb302: typec-portc@54 {
> + compatible = "fcs,fusb302";
> + reg = <0x54>;
> + interrupt-parent = <&nmi_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + fcs,max-sink-microvolt = <12000000>;
> + fcs,max-sink-microamp = <3000000>;
> + fcs,max-sink-microwatt = <36000000>;
> +};
> diff --git a/drivers/staging/typec/fusb302/TODO b/drivers/staging/typec/fusb302/TODO
> index 4933a1d92c32..19b466eb585d 100644
> --- a/drivers/staging/typec/fusb302/TODO
> +++ b/drivers/staging/typec/fusb302/TODO
> @@ -4,3 +4,7 @@ fusb302:
> - Find a non-hacky way to coordinate between PM and I2C access
> - Documentation? The FUSB302 datasheet provides information on the chip to help
> understand the code. But it may still be helpful to have a documentation.
> +- We may want to replace the "fcs,max-snk-microvolt", "fcs,max-snk-microamp",
> + "fcs,max-snk-microwatt" and "fcs,operating-snk-microwatt" device(tree)
> + properties with properties which are part of a generic type-c controller
> + devicetree binding.
> diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c
> index 6baed06a3c0d..1c1751c994db 100644
> --- a/drivers/staging/typec/fusb302/fusb302.c
> +++ b/drivers/staging/typec/fusb302/fusb302.c
> @@ -90,6 +90,7 @@ struct fusb302_chip {
> struct i2c_client *i2c_client;
> struct tcpm_port *tcpm_port;
> struct tcpc_dev tcpc_dev;
> + struct tcpc_config tcpc_config;
>
> struct regulator *vbus;
>
> @@ -1198,7 +1199,6 @@ static const struct tcpc_config fusb302_tcpc_config = {
>
> static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev)
> {
> - fusb302_tcpc_dev->config = &fusb302_tcpc_config;
> fusb302_tcpc_dev->init = tcpm_init;
> fusb302_tcpc_dev->get_vbus = tcpm_get_vbus;
> fusb302_tcpc_dev->set_cc = tcpm_set_cc;
> @@ -1684,7 +1684,9 @@ static int fusb302_probe(struct i2c_client *client,
> {
> struct fusb302_chip *chip;
> struct i2c_adapter *adapter;
> + struct device *dev = &client->dev;
> int ret = 0;
> + u32 v;
>
> adapter = to_i2c_adapter(client->dev.parent);
> if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
> @@ -1699,8 +1701,22 @@ static int fusb302_probe(struct i2c_client *client,
> chip->i2c_client = client;
> i2c_set_clientdata(client, chip);
> chip->dev = &client->dev;
> + chip->tcpc_config = fusb302_tcpc_config;
> + chip->tcpc_dev.config = &chip->tcpc_config;
> mutex_init(&chip->lock);
>
> + if (!device_property_read_u32(dev, "fcs,max-sink-microvolt", &v))
> + chip->tcpc_config.max_snk_mv = v / 1000;
> +
> + if (!device_property_read_u32(dev, "fcs,max-sink-microamp", &v))
> + chip->tcpc_config.max_snk_ma = v / 1000;
> +
> + if (!device_property_read_u32(dev, "fcs,max-sink-microwatt", &v))
> + chip->tcpc_config.max_snk_mw = v / 1000;
> +
> + if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v))
> + chip->tcpc_config.operating_snk_mw = v / 1000;
> +
> ret = fusb302_debugfs_init(chip);
> if (ret < 0)
> return ret;
>
Powered by blists - more mailing lists