linux-kernel - Re: [RESEND PATCH 2/2] arm64: allwinner: pine64: Enable spi0/spi1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20170830144843.zyqmf3awivzfqtbf@flea.lan>
Date:   Wed, 30 Aug 2017 16:48:43 +0200
From:   Maxime Ripard <maxime.ripard@...e-electrons.com>
To:     Stefan Brüns <stefan.bruens@...h-aachen.de>
Cc:     linux-sunxi@...glegroups.com, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, Chen-Yu Tsai <wens@...e.org>,
        Rob Herring <robh+dt@...nel.org>
Subject: Re: [RESEND PATCH 2/2] arm64: allwinner: pine64: Enable spi0/spi1

Hi Stefan,

On Tue, Aug 29, 2017 at 10:26:52PM +0200, Stefan Brüns wrote:
> The two spi channels/controllers are available on the PI-2 resp. Euler
> connector, enable both. Contrary to the Pi, the A64 SOC only supports
> one chip select, so the second chipselect is not available (though
> it can be emulated using gpio chipselect).
> 
> Signed-off-by: Stefan Brüns <stefan.bruens@...h-aachen.de>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> index 827168bc22ed..f25274e8b3e0 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> @@ -124,6 +124,14 @@
>  	status = "okay";
>  };
>  
> +&spi0 {
> +	status = "okay";
> +};
> +
> +&spi1 {
> +	status = "okay";
> +};

Anything on the Euler or PI connector is muxable to some other
function. We cannot enforce a default, since we can't know for sure
that all our users will use it that way (even though the majority
probably will). This is why you also have those nodes populated but
disabled for the uart for example in the pine64 DTS.

But in our case, there's not much to populate :)

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)