| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170912025414.3784-3-masaki.ota@jp.alps.com>
Date: Tue, 12 Sep 2017 11:54:09 +0900
From: Masaki Ota <012nexus@...il.com>
To: jikos@...nel.org, benjamin.tissoires@...hat.com
Cc: linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
masaki.ota@...alps.com
Subject: [PATCH 2/7] Minor changes in hid-alps.c for support new Alps device(Separate U1 device code)
From: Masaki Ota <masaki.ota@...alps.com>
-To support Alps T4 device, separate U1 device code
Signed-off-by: Masaki Ota <masaki.ota@...alps.com>
---
drivers/hid/hid-alps.c | 120 +++++++++++++++++++++++++++----------------------
1 file changed, 67 insertions(+), 53 deletions(-)
diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c
index 519bfcf9eaf0..c4ea5c6c9be9 100644
--- a/drivers/hid/hid-alps.c
+++ b/drivers/hid/hid-alps.c
@@ -75,6 +75,7 @@
* @y_max: maximum y coordinate value
* @btn_cnt: number of buttons
* @sp_btn_cnt: number of stick buttons
+ * @has_sp: boolean of sp existense
*/
struct u1_dev {
struct input_dev *input;
@@ -96,6 +97,7 @@ struct u1_dev {
u32 y_max;
u32 btn_cnt;
u32 sp_btn_cnt;
+ u8 has_sp;
};
static int u1_read_write_register(struct hid_device *hdev, u32 address,
@@ -255,99 +257,130 @@ static int alps_post_resume(struct hid_device *hdev)
}
#endif /* CONFIG_PM */
-static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
+static int u1_init(struct hid_device *hdev, struct u1_dev *pri_data)
{
- struct u1_dev *data = hid_get_drvdata(hdev);
- struct input_dev *input = hi->input, *input2;
int ret;
- int res_x, res_y, i;
-
- data->input = input;
-
- hid_dbg(hdev, "Opening low level driver\n");
- ret = hid_hw_open(hdev);
- if (ret)
- return ret;
-
- /* Allow incoming hid reports */
- hid_device_io_start(hdev);
/* Device initialization */
ret = u1_read_write_register(hdev, ADDRESS_U1_DEV_CTRL_1,
- &data->dev_ctrl, 0, true);
+ &pri_data->dev_ctrl, 0, true);
if (ret < 0) {
dev_err(&hdev->dev, "failed U1_DEV_CTRL_1 (%d)\n", ret);
goto exit;
}
- data->dev_ctrl &= ~U1_DISABLE_DEV;
- data->dev_ctrl |= U1_TP_ABS_MODE;
+ pri_data->dev_ctrl &= ~U1_DISABLE_DEV;
+ pri_data->dev_ctrl |= U1_TP_ABS_MODE;
ret = u1_read_write_register(hdev, ADDRESS_U1_DEV_CTRL_1,
- NULL, data->dev_ctrl, false);
+ NULL, pri_data->dev_ctrl, false);
if (ret < 0) {
dev_err(&hdev->dev, "failed to change TP mode (%d)\n", ret);
goto exit;
}
ret = u1_read_write_register(hdev, ADDRESS_U1_NUM_SENS_X,
- &data->sen_line_num_x, 0, true);
+ &pri_data->sen_line_num_x, 0, true);
if (ret < 0) {
dev_err(&hdev->dev, "failed U1_NUM_SENS_X (%d)\n", ret);
goto exit;
}
ret = u1_read_write_register(hdev, ADDRESS_U1_NUM_SENS_Y,
- &data->sen_line_num_y, 0, true);
+ &pri_data->sen_line_num_y, 0, true);
if (ret < 0) {
dev_err(&hdev->dev, "failed U1_NUM_SENS_Y (%d)\n", ret);
goto exit;
}
ret = u1_read_write_register(hdev, ADDRESS_U1_PITCH_SENS_X,
- &data->pitch_x, 0, true);
+ &pri_data->pitch_x, 0, true);
if (ret < 0) {
dev_err(&hdev->dev, "failed U1_PITCH_SENS_X (%d)\n", ret);
goto exit;
}
ret = u1_read_write_register(hdev, ADDRESS_U1_PITCH_SENS_Y,
- &data->pitch_y, 0, true);
+ &pri_data->pitch_y, 0, true);
if (ret < 0) {
dev_err(&hdev->dev, "failed U1_PITCH_SENS_Y (%d)\n", ret);
goto exit;
}
ret = u1_read_write_register(hdev, ADDRESS_U1_RESO_DWN_ABS,
- &data->resolution, 0, true);
+ &pri_data->resolution, 0, true);
if (ret < 0) {
dev_err(&hdev->dev, "failed U1_RESO_DWN_ABS (%d)\n", ret);
goto exit;
}
+ pri_data->x_active_len_mm =
+ (pri_data->pitch_x * (pri_data->sen_line_num_x - 1)) / 10;
+ pri_data->y_active_len_mm =
+ (pri_data->pitch_y * (pri_data->sen_line_num_y - 1)) / 10;
+
+ pri_data->x_max =
+ (pri_data->resolution << 2) * (pri_data->sen_line_num_x - 1);
+ pri_data->y_max =
+ (pri_data->resolution << 2) * (pri_data->sen_line_num_y - 1);
ret = u1_read_write_register(hdev, ADDRESS_U1_PAD_BTN,
- &data->btn_info, 0, true);
+ &pri_data->btn_info, 0, true);
if (ret < 0) {
dev_err(&hdev->dev, "failed U1_PAD_BTN (%d)\n", ret);
goto exit;
}
+ pri_data->has_sp = 0;
/* Check StickPointer device */
ret = u1_read_write_register(hdev, ADDRESS_U1_DEVICE_TYP,
- &data->dev_type, 0, true);
+ &pri_data->dev_type, 0, true);
if (ret < 0) {
dev_err(&hdev->dev, "failed U1_DEVICE_TYP (%d)\n", ret);
goto exit;
}
- data->x_active_len_mm =
- (data->pitch_x * (data->sen_line_num_x - 1)) / 10;
- data->y_active_len_mm =
- (data->pitch_y * (data->sen_line_num_y - 1)) / 10;
+ if (pri_data->dev_type & U1_DEVTYPE_SP_SUPPORT) {
+ pri_data->dev_ctrl |= U1_SP_ABS_MODE;
+ ret = u1_read_write_register(hdev, ADDRESS_U1_DEV_CTRL_1,
+ NULL, pri_data->dev_ctrl, false);
+ if (ret < 0) {
+ dev_err(&hdev->dev, "failed SP mode (%d)\n", ret);
+ goto exit;
+ }
+
+ ret = u1_read_write_register(hdev, ADDRESS_U1_SP_BTN,
+ &pri_data->sp_btn_info, 0, true);
+ if (ret < 0) {
+ dev_err(&hdev->dev, "failed U1_SP_BTN (%d)\n", ret);
+ goto exit;
+ }
+ pri_data->has_sp = 1;
+ }
- data->x_max =
- (data->resolution << 2) * (data->sen_line_num_x - 1);
- data->y_max =
- (data->resolution << 2) * (data->sen_line_num_y - 1);
+exit:
+ return ret;
+}
+
+static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
+{
+ struct u1_dev *data = hid_get_drvdata(hdev);
+ struct input_dev *input = hi->input, *input2;
+ int ret;
+ int res_x, res_y, i;
+
+ data->input = input;
+
+ hid_dbg(hdev, "Opening low level driver\n");
+ ret = hid_hw_open(hdev);
+ if (ret)
+ return ret;
+
+ /* Allow incoming hid reports */
+ hid_device_io_start(hdev);
+
+ ret = u1_init(hdev, data);
+
+ if (ret)
+ goto exit;
__set_bit(EV_ABS, input->evbit);
input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->x_max, 0, 0);
@@ -379,8 +412,7 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
/* Stick device initialization */
- if (data->dev_type & U1_DEVTYPE_SP_SUPPORT) {
-
+ if (data->has_sp) {
input2 = input_allocate_device();
if (!input2) {
ret = -ENOMEM;
@@ -388,24 +420,6 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
}
data->input2 = input2;
-
- data->dev_ctrl |= U1_SP_ABS_MODE;
- ret = u1_read_write_register(hdev, ADDRESS_U1_DEV_CTRL_1,
- NULL, data->dev_ctrl, false);
- if (ret < 0) {
- dev_err(&hdev->dev, "failed SP mode (%d)\n", ret);
- input_free_device(input2);
- goto exit;
- }
-
- ret = u1_read_write_register(hdev, ADDRESS_U1_SP_BTN,
- &data->sp_btn_info, 0, true);
- if (ret < 0) {
- dev_err(&hdev->dev, "failed U1_SP_BTN (%d)\n", ret);
- input_free_device(input2);
- goto exit;
- }
-
input2->phys = input->phys;
input2->name = "DualPoint Stick";
input2->id.bustype = BUS_I2C;
--
2.11.0
Powered by blists - more mailing lists