| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 20 Sep 2017 12:32:22 +0300
From: "sakari.ailus@....fi" <sakari.ailus@....fi>
To: Tomasz Figa <tfiga@...omium.org>
Cc: "Mani, Rajmohan" <rajmohan.mani@...el.com>,
"Mohandass, Divagar" <divagar.mohandass@...el.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"wsa@...-dreams.de" <wsa@...-dreams.de>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
mika.westerberg@...ux.intel.com
Subject: Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
Hi Tomasz,
On Wed, Sep 20, 2017 at 05:59:18PM +0900, Tomasz Figa wrote:
> On Wed, Sep 20, 2017 at 5:45 PM, sakari.ailus@....fi
> <sakari.ailus@....fi> wrote:
> > Hi Tomasz,
> >
> > On Wed, Sep 20, 2017 at 12:56:09PM +0900, Tomasz Figa wrote:
> >> Thanks Raj.
> >>
> >> Let me post my comments inline.
> >>
> >> On Wed, Sep 20, 2017 at 12:52 PM, Mani, Rajmohan
> >> <rajmohan.mani@...el.com> wrote:
> >> > Adding Tomasz...
> >> >
> >> >> -----Original Message-----
> >> >> From: Mohandass, Divagar
> >> >> Sent: Monday, September 04, 2017 3:29 AM
> >> >> To: robh+dt@...nel.org; mark.rutland@....com; wsa@...-dreams.de;
> >> >> sakari.ailus@....fi
> >> >> Cc: devicetree@...r.kernel.org; linux-i2c@...r.kernel.org; linux-
> >> >> kernel@...r.kernel.org; Mani, Rajmohan <rajmohan.mani@...el.com>;
> >> >> Mohandass, Divagar <divagar.mohandass@...el.com>
> >> >> Subject: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
> >> >>
> >> >> Currently the device is kept in D0, there is an opportunity to save power by
> >> >> enabling runtime pm.
> >> >>
> >> >> Device can be daisy chained from PMIC and we can't rely on I2C core for auto
> >> >> resume/suspend. Driver will decide when to resume/suspend.
> >> >>
> >> >> Signed-off-by: Divagar Mohandass <divagar.mohandass@...el.com>
> >> >> ---
> >> >> drivers/misc/eeprom/at24.c | 38
> >> >> ++++++++++++++++++++++++++++++++++++++
> >> >> 1 file changed, 38 insertions(+)
> >> >>
> >> >> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index
> >> >> 2199c42..d718a7a 100644
> >> >> --- a/drivers/misc/eeprom/at24.c
> >> >> +++ b/drivers/misc/eeprom/at24.c
> >> >> @@ -24,6 +24,7 @@
> >> >> #include <linux/i2c.h>
> >> >> #include <linux/nvmem-provider.h>
> >> >> #include <linux/platform_data/at24.h>
> >> >> +#include <linux/pm_runtime.h>
> >> >>
> >> >> /*
> >> >> * I2C EEPROMs from most vendors are inexpensive and mostly
> >> >> interchangeable.
> >> >> @@ -501,11 +502,21 @@ static ssize_t at24_eeprom_write_i2c(struct
> >> >> at24_data *at24, const char *buf, static int at24_read(void *priv, unsigned int
> >> >> off, void *val, size_t count) {
> >> >> struct at24_data *at24 = priv;
> >> >> + struct i2c_client *client;
> >> >> char *buf = val;
> >> >> + int ret;
> >> >>
> >> >> if (unlikely(!count))
> >> >> return count;
> >> >>
> >> >> + client = at24_translate_offset(at24, &off);
> >> >> +
> >> >> + ret = pm_runtime_get_sync(&client->dev);
> >> >> + if (ret < 0) {
> >> >> + pm_runtime_put_noidle(&client->dev);
> >> >> + return ret;
> >> >> + }
> >> >> +
> >> >> /*
> >> >> * Read data from chip, protecting against concurrent updates
> >> >> * from this host, but not from other I2C masters.
> >> >> @@ -518,6 +529,7 @@ static int at24_read(void *priv, unsigned int off, void
> >> >> *val, size_t count)
> >> >> status = at24->read_func(at24, buf, off, count);
> >> >> if (status < 0) {
> >> >> mutex_unlock(&at24->lock);
> >> >> + pm_runtime_put(&client->dev);
> >> >> return status;
> >> >> }
> >> >> buf += status;
> >> >> @@ -527,17 +539,29 @@ static int at24_read(void *priv, unsigned int off, void
> >> >> *val, size_t count)
> >> >>
> >> >> mutex_unlock(&at24->lock);
> >> >>
> >> >> + pm_runtime_put(&client->dev);
> >> >> +
> >> >> return 0;
> >> >> }
> >> >>
> >> >> static int at24_write(void *priv, unsigned int off, void *val, size_t count) {
> >> >> struct at24_data *at24 = priv;
> >> >> + struct i2c_client *client;
> >> >> char *buf = val;
> >> >> + int ret;
> >> >>
> >> >> if (unlikely(!count))
> >> >> return -EINVAL;
> >> >>
> >> >> + client = at24_translate_offset(at24, &off);
> >> >> +
> >> >> + ret = pm_runtime_get_sync(&client->dev);
> >> >> + if (ret < 0) {
> >> >> + pm_runtime_put_noidle(&client->dev);
> >> >> + return ret;
> >> >> + }
> >> >> +
> >> >> /*
> >> >> * Write data to chip, protecting against concurrent updates
> >> >> * from this host, but not from other I2C masters.
> >> >> @@ -550,6 +574,7 @@ static int at24_write(void *priv, unsigned int off, void
> >> >> *val, size_t count)
> >> >> status = at24->write_func(at24, buf, off, count);
> >> >> if (status < 0) {
> >> >> mutex_unlock(&at24->lock);
> >> >> + pm_runtime_put(&client->dev);
> >> >> return status;
> >> >> }
> >> >> buf += status;
> >> >> @@ -559,6 +584,8 @@ static int at24_write(void *priv, unsigned int off, void
> >> >> *val, size_t count)
> >> >>
> >> >> mutex_unlock(&at24->lock);
> >> >>
> >> >> + pm_runtime_put(&client->dev);
> >> >> +
> >> >> return 0;
> >> >> }
> >> >>
> >> >> @@ -743,11 +770,17 @@ static int at24_probe(struct i2c_client *client, const
> >> >> struct i2c_device_id *id)
> >> >>
> >> >> i2c_set_clientdata(client, at24);
> >> >>
> >> >> + /* enable runtime pm */
> >> >> + pm_runtime_get_noresume(&client->dev);
> >> >> + pm_runtime_set_active(&client->dev);
> >> >> + pm_runtime_enable(&client->dev);
> >>
> >> Do we need this get_noresume/set_active dance? I remember it was for
> >> some reason needed for PCI devices, but I don't see why for I2C
> >> anything else than just pm_runtime_enable() would be necessary.
> >
> > You specifically do not need (all) this for PCI devices, but AFAIU for I涎
> > devices you do. The runtime PM status of a device is disabled by default
> > and the use count is zero, but on ACPI based systems the device is still
> > powered on.
>
> Okay, so _get_noresume() and _set_active() would do the thing for ACPI
> indeed, but not sure about other platforms. Perhaps _enable(),
> _get_sync() would be more general?
What I ended up doing in e.g. the smiapp driver was to explicitly power the
device on first and then enable runtime PM. (See
drivers/media/i2c/smiapp/smiapp-core.c .) This approach works even if
CONFIG_PM is disabled, both on DT and ACPI.
--
Regards,
Sakari Ailus
e-mail: sakari.ailus@....fi
Powered by blists - more mailing lists