linux-kernel - Re: [PATCH v10 3/7] edac,soc: thunderx: Add wrapper for EDAC LMC PCI device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20171002151756.GA11514@hc>
Date:   Mon, 2 Oct 2017 17:17:56 +0200
From:   Jan Glauber <jan.glauber@...iumnetworks.com>
To:     Borislav Petkov <bp@...en8.de>
Cc:     Mark Rutland <mark.rutland@....com>,
        Will Deacon <will.deacon@....com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Suzuki K Poulose <Suzuki.Poulose@....com>,
        David Daney <david.daney@...ium.com>,
        Zhangshaokun <zhangshaokun@...ilicon.com>
Subject: Re: [PATCH v10 3/7] edac,soc: thunderx: Add wrapper for EDAC LMC PCI
 device

On Wed, Sep 27, 2017 at 06:19:01PM +0200, Borislav Petkov wrote:
> On Mon, Sep 25, 2017 at 02:34:58PM +0200, Jan Glauber wrote:
> > Cavium SOCs contain a memory controller that is presented as a
> > PCI device. This PCI device will be used by an EDAC driver and
> > by a PMU driver.
> > 
> > To allow both subsystems to access the device a small wrapper is
> > introduced that multi-plexes PCI probe and removal calls of the
> > device to the EDAC driver.
> > 
> > The same mechanism will be used later to call the PMU driver.
> > 
> > The ThunderX EDAC driver is limited to only build as module
> > with this patch. The reason is that with multiple users of the
> > multi-plexer all users must be either builtin or modules.
> > 
> > Signed-off-by: Jan Glauber <jglauber@...ium.com>
> > ---
> 
> ...
> 
> > diff --git a/drivers/soc/cavium/cavium_lmc.c b/drivers/soc/cavium/cavium_lmc.c
> > new file mode 100644
> > index 000000000000..87248e83c55b
> > --- /dev/null
> > +++ b/drivers/soc/cavium/cavium_lmc.c
> > @@ -0,0 +1,49 @@
> > +/*
> > + * These PCI devices contain RAS functionality and PMU counters. To allow
> > + * independent RAS and PMU drivers this driver registers for the PCI devices
> > + * and multi-plexes probe and removal.
> > + *
> > + * This file is subject to the terms and conditions of the GNU General Public
> > + * License.  See the file "COPYING" in the main directory of this archive
> > + * for more details.
> > + *
> > + * Copyright: Cavium, Inc. (C) 2017
> > + *
> > + */
> > +#include <linux/module.h>
> > +#include <linux/pci.h>
> > +#include <linux/soc/cavium/lmc.h>
> > +
> > +static int cvm_lmc_probe(struct pci_dev *pdev,
> > +			 const struct pci_device_id *ent)
> > +{
> > +	if (IS_ENABLED(CONFIG_EDAC_THUNDERX))
> > +		thunderx_edac_lmc_probe(pdev, ent);
> 
> You could save yourself the if (IS_ENABLED()) here by adding stubs in
> the lmc.h header for those functions for the !CONFIG_EDAC_THUNDERX case.

OK.

> One thing I'm not clear on though, is the design of the whole thing:
> cvm_lmc_probe() probes the EDAC driver during its own probe, which
> means, thunderx_edac needs to be loaded first. And the other things that
> get loaded, do the same.

Yes. That seems to work fine with the limitation of not being
able to have mixed build options, everything needs to be modular or
built-in. So I forced all parts to be buildable only as modules.

I went for this as the simplest solution, the probing is completely
synchronous and no state needs to be stored in the wrapper.

> What I was expecting is those small cavium_lmc.c and cavium_ocx.c
> wrappers to probe and register the respective PCI device and then its
> *users* - EDAC and PMU drivers to go and request the PCI device from
> them:
> 
> cavium_lmc_get_pci_dev()
> cavium_ocx_get_pci_dev()
> 
> and so on. Those will be exported to modules. And the small stubs can
> also be built-in too.

So this is the opposite approach which would be asynchronous. What I
don't understand with that approach:

1. What will trigger probing the edac (or perf) driver part?
   Right now the trigger is the PCI device ID. If the wrapper
   does not call into edac how should we load the ThunderX edac/perf drivers?
   The only option I see is a initcall in edac/perf to look for their devices.

2. The probe & register is _very_ specific to perf/edac and very different.
   The only part that would fit in the wrapper is pci_enable_device().
   So is that what you have in mind?

> This way you can do reference counting and whatever else.
> 
> If the above calls fail, neither EDAC nor PMU will load properly but you
> solve the multiplexing issue by having those wrappers arbitrate access
> to the PCI devices.
> 
> Because right now the wrappers are simply weakly hiding the calls into
> EDAC and that's exactly what I was opposing to.
> 
> Hmmm?

> > +	return 0;
> > +}
> > +
> > +static void cvm_lmc_remove(struct pci_dev *pdev)
> > +{
> > +	if (IS_ENABLED(CONFIG_EDAC_THUNDERX))
> > +		thunderx_edac_lmc_remove(pdev);
> > +}
> > +
> > +static const struct pci_device_id cvm_lmc_pci_table[] = {
> > +	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa022) },
> 
>         { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_LMC) },
> 
> You already have that PCI device id define.

True, will use it.

Thanks for looking at this!

--Jan

> -- 
> Regards/Gruss,
>     Boris.
> 
> Good mailing practices for 400: avoid top-posting and trim the reply.