lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c6a8dca71d794768a9e071806d53940b@ausx13mpc120.AMER.DELL.COM>
Date:   Tue, 3 Oct 2017 18:38:00 +0000
From:   <Mario.Limonciello@...l.com>
To:     <luto@...nel.org>, <dvhart@...radead.org>
CC:     <greg@...ah.com>, <andy.shevchenko@...il.com>,
        <linux-kernel@...r.kernel.org>,
        <platform-driver-x86@...r.kernel.org>, <quasisec@...gle.com>,
        <pali.rohar@...il.com>
Subject: RE: [PATCH v3 4/8] platform/x86: wmi: create character devices when
 requested by drivers

> -----Original Message-----
> From: Andy Lutomirski [mailto:luto@...nel.org]
> Sent: Tuesday, October 3, 2017 11:48 AM
> To: Darren Hart <dvhart@...radead.org>
> Cc: Greg KH <greg@...ah.com>; Limonciello, Mario
> <Mario_Limonciello@...l.com>; Andy Shevchenko
> <andy.shevchenko@...il.com>; LKML <linux-kernel@...r.kernel.org>;
> Platform Driver <platform-driver-x86@...r.kernel.org>; Andy Lutomirski
> <luto@...nel.org>; quasisec@...gle.com; Pali Rohár <pali.rohar@...il.com>
> Subject: Re: [PATCH v3 4/8] platform/x86: wmi: create character devices when
> requested by drivers
> 
> On Tue, Oct 3, 2017 at 8:10 AM, Darren Hart <dvhart@...radead.org> wrote:
> > On Tue, Oct 03, 2017 at 11:23:23AM +0200, Greg KH wrote:
> >> On Wed, Sep 27, 2017 at 11:02:16PM -0500, Mario Limonciello wrote:
> >> > For WMI operations that are only Set or Query read or write sysfs
> >> > attributes created by WMI vendor drivers make sense.
> >> >
> >> > For other WMI operations that are run on Method, there needs to be a
> >> > way to guarantee to userspace that the results from the method call
> >> > belong to the data request to the method call.  Sysfs attributes don't
> >> > work well in this scenario because two userspace processes may be
> >> > competing at reading/writing an attribute and step on each other's
> >> > data.
> >> >
> >> > When a WMI vendor driver declares a set of functions in a
> >> > file_operations object the WMI bus driver will create a character
> >> > device that maps to those file operations.
> >> >
> >> > That character device will correspond to this path:
> >> > /dev/wmi/$driver
> >> >
> >> > This policy is selected as one driver may map and use multiple
> >> > GUIDs and it would be better to only expose a single character
> >> > device.
> >> >
> >> > The WMI vendor drivers will be responsible for managing access to
> >> > this character device and proper locking on it.
> >> >
> >> > When a WMI vendor driver is unloaded the WMI bus driver will clean
> >> > up the character device.
> >>
> >> Ok, thanks to Darren, I've gone and dug these up while my boxes were
> >> building stable kernels...
> >>
> >> Why are you not just using the misc device interface here?  Why do you
> >> need a whole new major and minor range?  Why not just register misc
> >> devices dynamically as-needed?  Should be much simpler and easier to
> >> maintain and reduce your code size a lot.
> >
> > Thank you Greg, this simplifies things quite a bit.
> >
> > Mario, the misc device interface will remove a lot of the boiler plate
> > setup and eliminate the need to allocate a new major number.
> >
> 
> In my mind, the problem with misc is that you may end up forever stuck
> with a misc device, and they're distinct (visibly to userspace) from
> all other character devices.
> 
> If you really want to be fancy, you could try to dust off a non-awful
> character device API, a la:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/luto/linux.git/commit/?h=u2f&i
> d=d3ab93173d51cebf00dd2263fd0ce9f8cd6258f7

That's two years old.  What's the history of it?  Did you try to get it merged?

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ