[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAPDyKFqoDraQquAvA_n5+9R9rQXHNX+GG=Z=vXhw3x6B2=R6ig@mail.gmail.com>
Date: Wed, 4 Oct 2017 10:59:34 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: Carlo Caione <carlo@...one.org>,
Kevin Hilman <khilman@...libre.com>,
Heiner Kallweit <hkallweit1@...il.com>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"open list:ARM/Amlogic Meson..." <linux-amlogic@...ts.infradead.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 0/3] mmc: meson-gx: fixes for v4.14
On 2 October 2017 at 14:27, Jerome Brunet <jbrunet@...libre.com> wrote:
> This patchset fixes the issues reported by Heiner [0] with the odroid-c2.
> In a nutshell, this series does the following:
>
> * Make sure the mmc clock rate is not set higher than what is requested
> * Reset the tuning values on mmc power cycle instead of POWER_ON
> * Add tuning of the tx phase to the tuning function.
>
> This fixes the problem seen on the odroid-c2, both for hs200 and hs400.
> To check for regression, this series has also been tested on the gxl
> libretech-cc
>
> Ulf, could you please pick this as fixes for v4.14 ?
Thanks, applied for fixes!
Kind regards
Uffe
>
> [0]: https://lkml.kernel.org/r/e2171288-84ef-82db-2efc-300935e6c062@gmail.com
>
> Jerome Brunet (3):
> mmc: meson-gx: make sure the clock is rounded down
> mmc: meson-gx: fix rx phase reset
> mmc: meson-gx: include tx phase in the tuning process
>
> drivers/mmc/host/meson-gx-mmc.c | 26 ++++++++++++++++++++++----
> 1 file changed, 22 insertions(+), 4 deletions(-)
>
> --
> 2.13.5
>
Powered by blists - more mailing lists