[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171013191747.o7bvb5urs5jt2x4l@rob-hp-laptop>
Date: Fri, 13 Oct 2017 14:17:47 -0500
From: Rob Herring <robh@...nel.org>
To: srinivas.kandagatla@...aro.org
Cc: gregkh@...uxfoundation.org, broonie@...nel.org,
alsa-devel@...a-project.org, sdharia@...eaurora.org, bp@...e.de,
poeschel@...onage.de, treding@...dia.com,
gong.chen@...ux.intel.com, andreas.noever@...il.com,
alan@...ux.intel.com, mathieu.poirier@...aro.org, daniel@...ll.ch,
jkosina@...e.cz, sharon.dvir1@...l.huji.ac.il, joe@...ches.com,
davem@...emloft.net, james.hogan@...tec.com,
michael.opdenacker@...e-electrons.com, pawel.moll@....com,
mark.rutland@....com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, kheitke@...ience.com,
linux-arm-msm@...r.kernel.org, arnd@...db.de
Subject: Re: [Patch v6 3/7] slimbus: qcom: Add Qualcomm Slimbus controller
driver
On Fri, Oct 06, 2017 at 05:51:32PM +0200, srinivas.kandagatla@...aro.org wrote:
> From: Sagar Dharia <sdharia@...eaurora.org>
>
> This controller driver programs manager, interface, and framer
> devices for Qualcomm's slimbus HW block.
> Manager component currently implements logical address setting,
> and messaging interface.
> Interface device reports bus synchronization information, and framer
> device clocks the bus from the time it's woken up, until clock-pause
> is executed by the manager device.
>
> Signed-off-by: Sagar Dharia <sdharia@...eaurora.org>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> ---
> .../devicetree/bindings/slimbus/slim-qcom-ctrl.txt | 43 ++
Version 6 and this is the first I see it? Where's the version history?
Please split to separate patch.
> drivers/slimbus/Kconfig | 9 +
> drivers/slimbus/Makefile | 3 +
> drivers/slimbus/slim-qcom-ctrl.c | 594 +++++++++++++++++++++
> drivers/slimbus/slim-qcom.h | 63 +++
> 5 files changed, 712 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
> create mode 100644 drivers/slimbus/slim-qcom-ctrl.c
> create mode 100644 drivers/slimbus/slim-qcom.h
>
> diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
> new file mode 100644
> index 0000000..081110d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
> @@ -0,0 +1,43 @@
> +Qualcomm SLIMBUS controller
> +This controller is used if applications processor driver controls slimbus
> +master component.
> +
> +Required properties:
> +
> + - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
> + - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
> +
> + - reg : Offset and length of the register region(s) for the device
> + - reg-names : Register region name(s) referenced in reg above
> + Required register resource entries are:
> + "ctrl": Physical adderess of controller register blocks
> + - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible or
> + "qcom,slim" if using generic qcom SLIM IP.
No such thing as generic IP.
Fine as a fallback, but not by itself.
> + - interrupts : Interrupt number used by this controller
> + - clocks : Interface and core clocks used by this slimbus controller
> + - clock-names : Required clock-name entries are:
> + "iface_clk" : Interface clock for this controller
> + "core_clk" : Interrupt for controller core's BAM
_clk is redundant.
> +
> +
> +Optional property:
> + - reg entry for slew rate : If slew rate control register is provided, this
> + entry should be used.
> + - reg-name for slew rate: "slew"
Pointless to have -name when there is only one.
> +
> +Example:
> + slim@...80000 {
> + compatible = "qcom,slim";
> + #address-cells = <4>;
> + #size-cells = <0>;
> + reg = <0x28080000 0x2000>, <0x80207C 4>;
> + reg-names = "ctrl", "slew";
> + interrupts = <0 33 0>;
> + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
> + clock-names = "iface_clk", "core_clk";
> +
> + codec: wcd9310@1{
> + compatible = "slim217,60";
> + reg = <1 0>;
This would not compile. You don't have 4 cells here.
> + };
> + };
Powered by blists - more mailing lists