linux-kernel - [PATCH V2] scsi: storvsc: Allow only one remove lun work item to be issued per lun

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1508261721-24144-1-git-send-email-cavery@redhat.com>
Date:   Tue, 17 Oct 2017 13:35:21 -0400
From:   Cathy Avery <cavery@...hat.com>
To:     kys@...rosoft.com, hch@...radead.org, haiyangz@...rosoft.com,
        jejb@...ux.vnet.ibm.com, martin.petersen@...cle.com,
        dan.carpenter@...cle.com
Cc:     devel@...uxdriverproject.org, linux-kernel@...r.kernel.org,
        linux-scsi@...r.kernel.org
Subject: [PATCH V2] scsi: storvsc: Allow only one remove lun work item to be issued per lun

When running multipath on a VM if all available paths go down
the driver can schedule large amounts of storvsc_remove_lun
work items to the same lun. In response to the failing paths
typically storvsc responds by taking host->scan_mutex and issuing
a TUR per lun. If there has been heavy IO to the failed device
all the failed IOs are returned from the host. A remove lun work
item is issued per failed IO. If the outstanding TURs have not been
completed in a timely manner the scan_mutex is never released or
released too late. Consequently the many remove lun work items are
not completed as scsi_remove_device also tries to take host->scan_mutex.
This results in dragging the VM down and sometimes completely.

This patch only allows one remove lun to be issued to a particular
lun while it is an instantiated member of the scsi stack.

Changes since v1:

Use single threaded workqueue to serialize work in
storvsc_handle_error [Christoph Hellwig]

Signed-off-by: Cathy Avery <cavery@...hat.com>
---
 drivers/scsi/storvsc_drv.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 5e7200f..6febcdb 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -486,6 +486,8 @@ struct hv_host_device {
 	unsigned int port;
 	unsigned char path;
 	unsigned char target;
+	struct workqueue_struct *handle_error_wq;
+	char work_q_name[20];
 };
 
 struct storvsc_scan_work {
@@ -922,6 +924,7 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,
 {
 	struct storvsc_scan_work *wrk;
 	void (*process_err_fn)(struct work_struct *work);
+	struct hv_host_device *host_dev = shost_priv(host);
 	bool do_work = false;
 
 	switch (SRB_STATUS(vm_srb->srb_status)) {
@@ -988,7 +991,7 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,
 	wrk->lun = vm_srb->lun;
 	wrk->tgt_id = vm_srb->target_id;
 	INIT_WORK(&wrk->work, process_err_fn);
-	schedule_work(&wrk->work);
+	queue_work(host_dev->handle_error_wq, &wrk->work);
 }
 
 
@@ -1803,10 +1806,19 @@ static int storvsc_probe(struct hv_device *device,
 	if (stor_device->num_sc != 0)
 		host->nr_hw_queues = stor_device->num_sc + 1;
 
+	/*
+	 * Set the error handler work queue.
+	 */
+	snprintf(host_dev->work_q_name, sizeof(host_dev->work_q_name),
+		 "storvsc_error_wq_%d", host->host_no);
+	host_dev->handle_error_wq =
+			create_singlethread_workqueue(host_dev->work_q_name);
+	if (!host_dev->handle_error_wq)
+		goto err_out2;
 	/* Register the HBA and start the scsi bus scan */
 	ret = scsi_add_host(host, &device->device);
 	if (ret != 0)
-		goto err_out2;
+		goto err_out3;
 
 	if (!dev_is_ide) {
 		scsi_scan_host(host);
@@ -1815,7 +1827,7 @@ static int storvsc_probe(struct hv_device *device,
 			 device->dev_instance.b[4]);
 		ret = scsi_add_device(host, 0, target, 0);
 		if (ret)
-			goto err_out3;
+			goto err_out4;
 	}
 #if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
 	if (host->transportt == fc_transport_template) {
@@ -1827,14 +1839,17 @@ static int storvsc_probe(struct hv_device *device,
 		fc_host_port_name(host) = stor_device->port_name;
 		stor_device->rport = fc_remote_port_add(host, 0, &ids);
 		if (!stor_device->rport)
-			goto err_out3;
+			goto err_out4;
 	}
 #endif
 	return 0;
 
-err_out3:
+err_out4:
 	scsi_remove_host(host);
 
+err_out3:
+	destroy_workqueue(host_dev->handle_error_wq);
+
 err_out2:
 	/*
 	 * Once we have connected with the host, we would need to
@@ -1858,6 +1873,7 @@ static int storvsc_remove(struct hv_device *dev)
 {
 	struct storvsc_device *stor_device = hv_get_drvdata(dev);
 	struct Scsi_Host *host = stor_device->host;
+	struct hv_host_device *host_dev = shost_priv(host);
 
 #if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
 	if (host->transportt == fc_transport_template) {
@@ -1865,6 +1881,7 @@ static int storvsc_remove(struct hv_device *dev)
 		fc_remove_host(host);
 	}
 #endif
+	destroy_workqueue(host_dev->handle_error_wq);
 	scsi_remove_host(host);
 	storvsc_dev_remove(dev);
 	scsi_host_put(host);
-- 
2.5.0