[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171027032132.16418-3-wenyou.yang@microchip.com>
Date: Fri, 27 Oct 2017 11:21:29 +0800
From: Wenyou Yang <wenyou.yang@...rochip.com>
To: Mauro Carvalho Chehab <mchehab@...pensource.com>
CC: <linux-kernel@...r.kernel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Sakari Ailus <sakari.ailus@....fi>,
"Jonathan Corbet" <corbet@....net>,
Hans Verkuil <hverkuil@...all.nl>,
<linux-arm-kernel@...ts.infradead.org>,
Linux Media Mailing List <linux-media@...r.kernel.org>,
Wenyou Yang <wenyou.yang@...rochip.com>
Subject: [PATCH v5 2/5] media: atmel-isc: Add prepare and unprepare ops
A software write operation to the ISC_CLKEN or ISC_CLKDIS register
requires double clock domain synchronization and is not permitted
when the ISC_SR.SIP is asserted. So add the .prepare and .unprepare
ops to make sure the ISC_CLKSR.SIP is unasserted before the write
operation to the ISC_CLKEN or ISC_CLKDIS register.
Signed-off-by: Wenyou Yang <wenyou.yang@...rochip.com>
---
Changes in v5:
- Fix the clock ID which enters the runtime suspend should be
ISC_ISPCK, instead of ISC_MCK for clk_prepare/clk_unprepare().
Changes in v4:
- Call pm_runtime_get_sync() and pm_runtime_put_sync() in ->prepare
and ->unprepare callback.
Changes in v3: None
Changes in v2: None
drivers/media/platform/atmel/atmel-isc-regs.h | 1 +
drivers/media/platform/atmel/atmel-isc.c | 40 +++++++++++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
index 6936ac467609..93e58fcf1d5f 100644
--- a/drivers/media/platform/atmel/atmel-isc-regs.h
+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
@@ -42,6 +42,7 @@
/* ISC Clock Status Register */
#define ISC_CLKSR 0x00000020
+#define ISC_CLKSR_SIP BIT(31)
#define ISC_CLK(n) BIT(n)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 991f962b7023..329ee8f256bb 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -308,6 +308,44 @@ module_param(sensor_preferred, uint, 0644);
MODULE_PARM_DESC(sensor_preferred,
"Sensor is preferred to output the specified format (1-on 0-off), default 1");
+static int isc_wait_clk_stable(struct clk_hw *hw)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+ struct regmap *regmap = isc_clk->regmap;
+ unsigned long timeout = jiffies + usecs_to_jiffies(1000);
+ unsigned int status;
+
+ while (time_before(jiffies, timeout)) {
+ regmap_read(regmap, ISC_CLKSR, &status);
+ if (!(status & ISC_CLKSR_SIP))
+ return 0;
+
+ usleep_range(10, 250);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int isc_clk_prepare(struct clk_hw *hw)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+
+ if (isc_clk->id == ISC_ISPCK)
+ pm_runtime_get_sync(isc_clk->dev);
+
+ return isc_wait_clk_stable(hw);
+}
+
+static void isc_clk_unprepare(struct clk_hw *hw)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+
+ isc_wait_clk_stable(hw);
+
+ if (isc_clk->id == ISC_ISPCK)
+ pm_runtime_put_sync(isc_clk->dev);
+}
+
static int isc_clk_enable(struct clk_hw *hw)
{
struct isc_clk *isc_clk = to_isc_clk(hw);
@@ -459,6 +497,8 @@ static int isc_clk_set_rate(struct clk_hw *hw,
}
static const struct clk_ops isc_clk_ops = {
+ .prepare = isc_clk_prepare,
+ .unprepare = isc_clk_unprepare,
.enable = isc_clk_enable,
.disable = isc_clk_disable,
.is_enabled = isc_clk_is_enabled,
--
2.13.0
Powered by blists - more mailing lists