| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20171101013457.17365-3-qiang.zhao@nxp.com>
Date: Wed, 1 Nov 2017 09:34:52 +0800
From: Zhao Qiang <qiang.zhao@....com>
To: <tglx@...utronix.de>, <jason@...edaemon.net>,
<marc.zyngier@....com>
CC: <linux-kernel@...r.kernel.org>, Zhao Qiang <qiang.zhao@....com>
Subject: [PATCH 3/8] QE: remove PPCisms for QE
QE was supported on PowerPC, and dependent on PPC,
Now it is supported on other platforms. so remove PPCisms.
Signed-off-by: Zhao Qiang <qiang.zhao@....com>
---
drivers/net/ethernet/freescale/Kconfig | 11 ++---
drivers/soc/fsl/qe/Kconfig | 2 +-
drivers/soc/fsl/qe/qe.c | 80 ++++++++++++++++++++--------------
drivers/soc/fsl/qe/qe_io.c | 42 ++++++++----------
drivers/soc/fsl/qe/qe_tdm.c | 8 ++--
drivers/soc/fsl/qe/ucc.c | 10 ++---
drivers/soc/fsl/qe/ucc_fast.c | 74 ++++++++++++++++---------------
drivers/tty/serial/Kconfig | 2 +-
drivers/tty/serial/ucc_uart.c | 1 +
drivers/usb/gadget/udc/Kconfig | 2 +-
drivers/usb/host/Kconfig | 2 +-
include/soc/fsl/qe/qe.h | 1 -
12 files changed, 124 insertions(+), 111 deletions(-)
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 6e490fd2..015bdb8 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -5,10 +5,11 @@
config NET_VENDOR_FREESCALE
bool "Freescale devices"
default y
- depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
- M523x || M527x || M5272 || M528x || M520x || M532x || \
- ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
- ARCH_LAYERSCAPE || COMPILE_TEST
+ depends on FSL_SOC || (QUICC_ENGINE && PPC32) || CPM1 || CPM2 || \
+ PPC_MPC512x || M523x || M527x || M5272 || M528x || M520x || \
+ M532x || ARCH_MXC || ARCH_MXS || \
+ (PPC_MPC52xx && PPC_BESTCOMM) || ARCH_LAYERSCAPE || \
+ COMPILE_TEST
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -73,7 +74,7 @@ config FSL_XGMAC_MDIO
config UCC_GETH
tristate "Freescale QE Gigabit Ethernet"
- depends on QUICC_ENGINE
+ depends on QUICC_ENGINE && FSL_SOC && PPC32
select FSL_PQ_MDIO
select PHYLIB
---help---
diff --git a/drivers/soc/fsl/qe/Kconfig b/drivers/soc/fsl/qe/Kconfig
index 73a2e08..b26b643 100644
--- a/drivers/soc/fsl/qe/Kconfig
+++ b/drivers/soc/fsl/qe/Kconfig
@@ -4,7 +4,7 @@
config QUICC_ENGINE
bool "Freescale QUICC Engine (QE) Support"
- depends on FSL_SOC && PPC32
+ depends on OF && HAS_IOMEM
select GENERIC_ALLOCATOR
select CRC32
help
diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c
index ade168f..52aaf41 100644
--- a/drivers/soc/fsl/qe/qe.c
+++ b/drivers/soc/fsl/qe/qe.c
@@ -33,8 +33,6 @@
#include <asm/pgtable.h>
#include <soc/fsl/qe/immap_qe.h>
#include <soc/fsl/qe/qe.h>
-#include <asm/prom.h>
-#include <asm/rheap.h>
static void qe_snums_init(void);
static int qe_sdma_init(void);
@@ -109,15 +107,27 @@ void qe_reset(void)
panic("sdma init failed!");
}
+/* issue commands to QE, return 0 on success while -EIO on error
+ *
+ * @cmd: the command code, should be QE_INIT_TX_RX, QE_STOP_TX and so on
+ * @device: which sub-block will run the command, QE_CR_SUBBLOCK_UCCFAST1 - 8
+ * , QE_CR_SUBBLOCK_UCCSLOW1 - 8, QE_CR_SUBBLOCK_MCC1 - 3,
+ * QE_CR_SUBBLOCK_IDMA1 - 4 and such on.
+ * @mcn_protocol: specifies mode for the command for non-MCC, should be
+ * QE_CR_PROTOCOL_HDLC_TRANSPARENT, QE_CR_PROTOCOL_QMC, QE_CR_PROTOCOL_UART
+ * and such on.
+ * @cmd_input: command related data.
+ */
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
{
unsigned long flags;
u8 mcn_shift = 0, dev_shift = 0;
- u32 ret;
+ int ret;
+ int i;
spin_lock_irqsave(&qe_lock, flags);
if (cmd == QE_RESET) {
- out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+ iowrite32be((cmd | QE_CR_FLG), &qe_immr->cp.cecr);
} else {
if (cmd == QE_ASSIGN_PAGE) {
/* Here device is the SNUM, not sub-block */
@@ -134,20 +144,26 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
}
- out_be32(&qe_immr->cp.cecdr, cmd_input);
- out_be32(&qe_immr->cp.cecr,
- (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
- mcn_protocol << mcn_shift));
+ iowrite32be(cmd_input, &qe_immr->cp.cecdr);
+ iowrite32be((cmd | QE_CR_FLG | ((u32)device << dev_shift) |
+ (u32)mcn_protocol << mcn_shift), &qe_immr->cp.cecr);
}
/* wait for the QE_CR_FLG to clear */
- ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
- 100, 0);
+ ret = -EIO;
+ for (i = 0; i < 100; i++) {
+ if ((ioread32be(&qe_immr->cp.cecr) & QE_CR_FLG) == 0) {
+ ret = 0;
+ break;
+ }
+ udelay(1);
+ }
+
/* On timeout (e.g. failure), the expression will be false (ret == 0),
otherwise it will be true (ret == 1). */
spin_unlock_irqrestore(&qe_lock, flags);
- return ret == 1;
+ return ret;
}
EXPORT_SYMBOL(qe_issue_cmd);
@@ -166,8 +182,8 @@ static unsigned int brg_clk = 0;
unsigned int qe_get_brg_clk(void)
{
struct device_node *qe;
- int size;
- const u32 *prop;
+ u32 val;
+ int ret;
if (brg_clk)
return brg_clk;
@@ -179,9 +195,9 @@ unsigned int qe_get_brg_clk(void)
return brg_clk;
}
- prop = of_get_property(qe, "brg-frequency", &size);
- if (prop && size == sizeof(*prop))
- brg_clk = *prop;
+ ret = of_property_read_u32(qe, "brg-frequency", &val);
+ if (!ret)
+ brg_clk = val;
of_node_put(qe);
@@ -221,7 +237,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
QE_BRGC_ENABLE | div16;
- out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
+ iowrite32be(tempval, &qe_immr->brg.brgc[brg - QE_BRG1]);
return 0;
}
@@ -355,9 +371,9 @@ static int qe_sdma_init(void)
return -ENOMEM;
}
- out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
- out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
- (0x1 << QE_SDMR_CEN_SHIFT)));
+ iowrite32be((u32)sdma_buf_offset & QE_SDEBCR_BA_MASK, &sdma->sdebcr);
+ iowrite32be((QE_SDMR_GLB_1_MSK | (0x1 << QE_SDMR_CEN_SHIFT)),
+ &sdma->sdmr);
return 0;
}
@@ -395,14 +411,14 @@ static void qe_upload_microcode(const void *base,
"uploading microcode '%s'\n", ucode->id);
/* Use auto-increment */
- out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
- QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
+ iowrite32be(be32_to_cpu(ucode->iram_offset) | QE_IRAM_IADD_AIE |
+ QE_IRAM_IADD_BADDR, &qe_immr->iram.iadd);
for (i = 0; i < be32_to_cpu(ucode->count); i++)
- out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+ iowrite32be(be32_to_cpu(code[i]), &qe_immr->iram.idata);
/* Set I-RAM Ready Register */
- out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
+ iowrite32be(be32_to_cpu(QE_IRAM_READY), &qe_immr->iram.iready);
}
/*
@@ -487,7 +503,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
* If the microcode calls for it, split the I-RAM.
*/
if (!firmware->split)
- setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
+ qe_setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
if (firmware->soc.model)
printk(KERN_INFO
@@ -521,11 +537,11 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
u32 trap = be32_to_cpu(ucode->traps[j]);
if (trap)
- out_be32(&qe_immr->rsp[i].tibcr[j], trap);
+ iowrite32be(trap, &qe_immr->rsp[i].tibcr[j]);
}
/* Enable traps */
- out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
+ iowrite32be(be32_to_cpu(ucode->eccr), &qe_immr->rsp[i].eccr);
}
qe_firmware_uploaded = 1;
@@ -644,9 +660,9 @@ EXPORT_SYMBOL(qe_get_num_of_risc);
unsigned int qe_get_num_of_snums(void)
{
struct device_node *qe;
- int size;
unsigned int num_of_snums;
- const u32 *prop;
+ u32 val;
+ int ret;
num_of_snums = 28; /* The default number of snum for threads is 28 */
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
@@ -660,9 +676,9 @@ unsigned int qe_get_num_of_snums(void)
return num_of_snums;
}
- prop = of_get_property(qe, "fsl,qe-num-snums", &size);
- if (prop && size == sizeof(*prop)) {
- num_of_snums = *prop;
+ ret = of_property_read_u32(qe, "fsl,qe-num-snums", &val);
+ if (!ret) {
+ num_of_snums = val;
if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
/* No QE ever has fewer than 28 SNUMs */
pr_err("QE: number of snum is invalid\n");
diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c
index 7ae59ab..8966e8b 100644
--- a/drivers/soc/fsl/qe/qe_io.c
+++ b/drivers/soc/fsl/qe/qe_io.c
@@ -22,8 +22,6 @@
#include <asm/io.h>
#include <soc/fsl/qe/qe.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
#undef DEBUG
@@ -61,16 +59,16 @@ void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
/* Set open drain, if required */
- tmp_val = in_be32(&par_io->cpodr);
+ tmp_val = ioread32be(&par_io->cpodr);
if (open_drain)
- out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
+ iowrite32be(pin_mask1bit | tmp_val, &par_io->cpodr);
else
- out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
+ iowrite32be(~pin_mask1bit & tmp_val, &par_io->cpodr);
/* define direction */
tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
- in_be32(&par_io->cpdir2) :
- in_be32(&par_io->cpdir1);
+ ioread32be(&par_io->cpdir2) :
+ ioread32be(&par_io->cpdir1);
/* get all bits mask for 2 bit per port */
pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
@@ -82,34 +80,30 @@ void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
/* clear and set 2 bits mask */
if (pin > (QE_PIO_PINS / 2) - 1) {
- out_be32(&par_io->cpdir2,
- ~pin_mask2bits & tmp_val);
+ iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir2);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
+ iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir2);
} else {
- out_be32(&par_io->cpdir1,
- ~pin_mask2bits & tmp_val);
+ iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir1);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
+ iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir1);
}
/* define pin assignment */
tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
- in_be32(&par_io->cppar2) :
- in_be32(&par_io->cppar1);
+ ioread32be(&par_io->cppar2) :
+ ioread32be(&par_io->cppar1);
new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
(pin % (QE_PIO_PINS / 2) + 1) * 2));
/* clear and set 2 bits mask */
if (pin > (QE_PIO_PINS / 2) - 1) {
- out_be32(&par_io->cppar2,
- ~pin_mask2bits & tmp_val);
+ iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar2);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
+ iowrite32be(new_mask2bits | tmp_val, &par_io->cppar2);
} else {
- out_be32(&par_io->cppar1,
- ~pin_mask2bits & tmp_val);
+ iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar1);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
+ iowrite32be(new_mask2bits | tmp_val, &par_io->cppar1);
}
}
EXPORT_SYMBOL(__par_io_config_pin);
@@ -137,12 +131,12 @@ int par_io_data_set(u8 port, u8 pin, u8 val)
/* calculate pin location */
pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
- tmp_val = in_be32(&par_io[port].cpdata);
+ tmp_val = ioread32be(&par_io[port].cpdata);
if (val == 0) /* clear */
- out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
+ iowrite32be(~pin_mask & tmp_val, &par_io[port].cpdata);
else /* set */
- out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
+ iowrite32be(pin_mask | tmp_val, &par_io[port].cpdata);
return 0;
}
diff --git a/drivers/soc/fsl/qe/qe_tdm.c b/drivers/soc/fsl/qe/qe_tdm.c
index a1048b4..818e679 100644
--- a/drivers/soc/fsl/qe/qe_tdm.c
+++ b/drivers/soc/fsl/qe/qe_tdm.c
@@ -227,10 +227,10 @@ void ucc_tdm_init(struct ucc_tdm *utdm, struct ucc_tdm_info *ut_info)
&siram[siram_entry_id * 32 + 0x200 + i]);
}
- setbits16(&siram[(siram_entry_id * 32) + (utdm->num_of_ts - 1)],
- SIR_LAST);
- setbits16(&siram[(siram_entry_id * 32) + 0x200 + (utdm->num_of_ts - 1)],
- SIR_LAST);
+ qe_setbits16(&siram[(siram_entry_id * 32) + (utdm->num_of_ts - 1)],
+ SIR_LAST);
+ qe_setbits16(&siram[(siram_entry_id * 32) + 0x200 +
+ (utdm->num_of_ts - 1)], SIR_LAST);
/* Set SIxMR register */
sixmr = SIMR_SAD(siram_entry_id);
diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c
index c646d87..bc64b83 100644
--- a/drivers/soc/fsl/qe/ucc.c
+++ b/drivers/soc/fsl/qe/ucc.c
@@ -39,7 +39,7 @@ int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
return -EINVAL;
spin_lock_irqsave(&cmxgcr_lock, flags);
- clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
+ qe_clrsetbits32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
spin_unlock_irqrestore(&cmxgcr_lock, flags);
@@ -84,7 +84,7 @@ int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
return -EINVAL;
}
- clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
+ qe_clrsetbits8(guemr, UCC_GUEMR_MODE_MASK,
UCC_GUEMR_SET_RESERVED3 | speed);
return 0;
@@ -113,9 +113,9 @@ int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift);
if (set)
- setbits32(cmxucr, mask << shift);
+ qe_setbits32(cmxucr, mask << shift);
else
- clrbits32(cmxucr, mask << shift);
+ qe_clrbits32(cmxucr, mask << shift);
return 0;
}
@@ -211,7 +211,7 @@ int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
if (mode == COMM_DIR_RX)
shift += 4;
- clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+ qe_clrsetbits32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
clock_bits << shift);
return 0;
diff --git a/drivers/soc/fsl/qe/ucc_fast.c b/drivers/soc/fsl/qe/ucc_fast.c
index 83d8d16..5115e93 100644
--- a/drivers/soc/fsl/qe/ucc_fast.c
+++ b/drivers/soc/fsl/qe/ucc_fast.c
@@ -33,41 +33,41 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+ &uccf->uf_regs->gumr, ioread32be(&uccf->uf_regs->gumr));
printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+ &uccf->uf_regs->upsmr, ioread32be(&uccf->uf_regs->upsmr));
printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+ &uccf->uf_regs->utodr, ioread16be(&uccf->uf_regs->utodr));
printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+ &uccf->uf_regs->udsr, ioread16be(&uccf->uf_regs->udsr));
printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+ &uccf->uf_regs->ucce, ioread32be(&uccf->uf_regs->ucce));
printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+ &uccf->uf_regs->uccm, ioread32be(&uccf->uf_regs->uccm));
printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n",
- &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
+ &uccf->uf_regs->uccs, ioread8(&uccf->uf_regs->uccs));
printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+ &uccf->uf_regs->urfb, ioread32be(&uccf->uf_regs->urfb));
printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+ &uccf->uf_regs->urfs, ioread16be(&uccf->uf_regs->urfs));
printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+ &uccf->uf_regs->urfet, ioread16be(&uccf->uf_regs->urfet));
printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
+ &uccf->uf_regs->urfset, ioread16be(&uccf->uf_regs->urfset));
printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+ &uccf->uf_regs->utfb, ioread32be(&uccf->uf_regs->utfb));
printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+ &uccf->uf_regs->utfs, ioread16be(&uccf->uf_regs->utfs));
printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+ &uccf->uf_regs->utfet, ioread16be(&uccf->uf_regs->utfet));
printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+ &uccf->uf_regs->utftt, ioread16be(&uccf->uf_regs->utftt));
printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+ &uccf->uf_regs->utpt, ioread16be(&uccf->uf_regs->utpt));
printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+ &uccf->uf_regs->urtry, ioread32be(&uccf->uf_regs->urtry));
printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
- &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
+ &uccf->uf_regs->guemr, ioread8(&uccf->uf_regs->guemr));
}
EXPORT_SYMBOL(ucc_fast_dump_regs);
@@ -89,7 +89,7 @@ EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
{
- out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+ iowrite16be(UCC_FAST_TOD, &uccf->uf_regs->utodr);
}
EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
@@ -101,7 +101,7 @@ void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
uf_regs = uccf->uf_regs;
/* Enable reception and/or transmission on this UCC. */
- gumr = in_be32(&uf_regs->gumr);
+ gumr = ioread32be(&uf_regs->gumr);
if (mode & COMM_DIR_TX) {
gumr |= UCC_FAST_GUMR_ENT;
uccf->enabled_tx = 1;
@@ -110,7 +110,7 @@ void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
gumr |= UCC_FAST_GUMR_ENR;
uccf->enabled_rx = 1;
}
- out_be32(&uf_regs->gumr, gumr);
+ iowrite32be(gumr, &uf_regs->gumr);
}
EXPORT_SYMBOL(ucc_fast_enable);
@@ -122,7 +122,7 @@ void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
uf_regs = uccf->uf_regs;
/* Disable reception and/or transmission on this UCC. */
- gumr = in_be32(&uf_regs->gumr);
+ gumr = ioread32be(&uf_regs->gumr);
if (mode & COMM_DIR_TX) {
gumr &= ~UCC_FAST_GUMR_ENT;
uccf->enabled_tx = 0;
@@ -131,7 +131,7 @@ void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
gumr &= ~UCC_FAST_GUMR_ENR;
uccf->enabled_rx = 0;
}
- out_be32(&uf_regs->gumr, gumr);
+ iowrite32be(gumr, &uf_regs->gumr);
}
EXPORT_SYMBOL(ucc_fast_disable);
@@ -263,12 +263,13 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
gumr |= uf_info->tenc;
gumr |= uf_info->tcrc;
gumr |= uf_info->mode;
- out_be32(&uf_regs->gumr, gumr);
+ iowrite32be(gumr, &uf_regs->gumr);
/* Allocate memory for Tx Virtual Fifo */
uccf->ucc_fast_tx_virtual_fifo_base_offset =
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
- if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+ if (IS_ERR_VALUE((unsigned long)uccf->
+ ucc_fast_tx_virtual_fifo_base_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
__func__);
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
@@ -281,7 +282,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
qe_muram_alloc(uf_info->urfs +
UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
- if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+ if (IS_ERR_VALUE((unsigned long)uccf->
+ ucc_fast_rx_virtual_fifo_base_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
__func__);
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
@@ -290,15 +292,15 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
}
/* Set Virtual Fifo registers */
- out_be16(&uf_regs->urfs, uf_info->urfs);
- out_be16(&uf_regs->urfet, uf_info->urfet);
- out_be16(&uf_regs->urfset, uf_info->urfset);
- out_be16(&uf_regs->utfs, uf_info->utfs);
- out_be16(&uf_regs->utfet, uf_info->utfet);
- out_be16(&uf_regs->utftt, uf_info->utftt);
+ iowrite16be(uf_info->urfs, &uf_regs->urfs);
+ iowrite16be(uf_info->urfet, &uf_regs->urfet);
+ iowrite16be(uf_info->urfset, &uf_regs->urfset);
+ iowrite16be(uf_info->utfs, &uf_regs->utfs);
+ iowrite16be(uf_info->utfet, &uf_regs->utfet);
+ iowrite16be(uf_info->utftt, &uf_regs->utftt);
/* utfb, urfb are offsets from MURAM base */
- out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
- out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+ iowrite32be(uccf->ucc_fast_tx_virtual_fifo_base_offset, &uf_regs->utfb);
+ iowrite32be(uccf->ucc_fast_rx_virtual_fifo_base_offset, &uf_regs->urfb);
/* Mux clocking */
/* Grant Support */
@@ -366,14 +368,14 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
}
/* Set interrupt mask register at UCC level. */
- out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+ iowrite32be(uf_info->uccm_mask, &uf_regs->uccm);
/* First, clear anything pending at UCC level,
* otherwise, old garbage may come through
* as soon as the dam is opened. */
/* Writing '1' clears */
- out_be32(&uf_regs->ucce, 0xffffffff);
+ iowrite32be(0xffffffff, &uf_regs->ucce);
*uccf_ret = uccf;
return 0;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e9cf5b6..b02ae82 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1166,7 +1166,7 @@ config SERIAL_LANTIQ
config SERIAL_QE
tristate "Freescale QUICC Engine serial port support"
- depends on QUICC_ENGINE
+ depends on QUICC_ENGINE && FSL_SOC && PPC32
select SERIAL_CORE
select FW_LOADER
default n
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 481eb29..ee409fd 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -34,6 +34,7 @@
#include <soc/fsl/qe/ucc_slow.h>
#include <linux/firmware.h>
+#include <asm/cpm.h>
#include <asm/reg.h>
/*
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 658b8da..e18168c 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -277,7 +277,7 @@ config USB_AMD5536UDC
config USB_FSL_QE
tristate "Freescale QE/CPM USB Device Controller"
- depends on FSL_SOC && (QUICC_ENGINE || CPM)
+ depends on (FSL_SOC && QUICC_ENGINE && PPC32) || (FSL_SOC && CPM)
help
Some of Freescale PowerPC processors have a Full Speed
QE/CPM2 USB controller, which support device mode with 4
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 6361fc7..30f0548 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -639,7 +639,7 @@ config USB_UHCI_BIG_ENDIAN_DESC
config USB_FHCI_HCD
tristate "Freescale QE USB Host Controller support"
- depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
+ depends on OF_GPIO && QE_GPIO && QUICC_ENGINE && FSL_SOC && PPC32
select FSL_GTM
select QE_USB
help
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index 70339d7..f7a14f2 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -21,7 +21,6 @@
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <asm/cpm.h>
#include <soc/fsl/qe/immap_qe.h>
#include <linux/of.h>
#include <linux/of_address.h>
--
2.1.0.27.g96db324
Powered by blists - more mailing lists