| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 3 Nov 2017 16:10:50 -0400 (EDT)
From: Mikulas Patocka <mpatocka@...hat.com>
To: "Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
cc: Mike Snitzer <snitzer@...hat.com>,
Zdenek Kabelac <zkabelac@...hat.com>,
"Alasdair G. Kergon" <agk@...hat.com>, dm-devel@...hat.com,
linux-kernel@...r.kernel.org
Subject: Re: SRCU's apparent use of NR_CPUS? [was: re: dm: allocate struct
mapped_device with kvzalloc]
On Wed, 1 Nov 2017, Paul E. McKenney wrote:
> On Wed, Nov 01, 2017 at 11:48:44AM -0400, Mike Snitzer wrote:
> > [cc'ing Paul, and LKML, to get his/others' take on SRCU cpu scaling]
> >
> > On Tue, Oct 31 2017 at 7:33pm -0400,
> > Mikulas Patocka <mpatocka@...hat.com> wrote:
> >
> > > The structure srcu_struct can be very big, its size is proportional to the
> > > value CONFIG_NR_CPUS. The Fedora kernel has CONFIG_NR_CPUS 8192, the field
> > > io_barrier in the struct mapped_device has 84kB in the debugging kernel
> > > and 50kB in the non-debugging kernel. The large size may result in failure
> > > of the function kzalloc_node.
> > >
> > > In order to avoid the allocation failure, we use the function
> > > kvzalloc_node, this function falls back to vmalloc if a large contiguous
> > > chunk of memory is not available. This patch also moves the field
> > > io_barrier to the last position of struct mapped_device - the reason is
> > > that on many processor architectures, short memory offsets result in
> > > smaller code than long memory offsets - on x86-64 it reduces code size by
> > > 320 bytes.
> > >
> > > Note to stable kernel maintainers - the kernels 4.11 and older don't have
> > > the function kvzalloc_node, you can use the function vzalloc_node instead.
> > >
> > > Signed-off-by: Mikulas Patocka <mpatocka@...hat.com>
> > > Cc: stable@...r.kernel.org
> >
> > This looks reasonable as a near-term workaround.. BUT:
> > Paul has there been any discussion about how to make SRCU support
> > dynamically scaling up to NR_CPUS maximum as 'nr_cpus' changes (rather
> > than accounting for worst case of NR_CPUS up-front)?
>
> This is the first I have heard of this being a problem.
>
> For static instances of srcu_struct, life is hard.
>
> But it should not be all that difficult for SRCU to provide an allocator
> for the dynamic cases, which given your kzalloc_node() above is the case
> you are worried about, at least assuming that these allocations happen
> after rcu_init() is invoked (which is pretty early).
>
> My approach would be to move the srcu_struct ->node[] array to its
> own structure, with a pointer from srcu_struct, allowing short-sized
> allocations to be used. (But I do need to check to make sure that there
> are no gotchas, and with RCU there usually are a few.) Obviously some
> -serious- testing would be required -- do you have a range of systems
> to test on?
>
> However, you would still have your potential failure case for systems
> that really did have large numbers of CPUs, some of which really do
> exist in the wild.
So - you can allocate srcu_struct->node with kvmalloc - it will
automatically fallback to vmalloc if the allocation is too large for
kmalloc.
Mikulas
> > (But I had a quick look at scrutree.h and I'm not seeing explicit use of
> > NR_CPUS, so it is likely occuring via implicit percpu through some
> > member of 'struct srcu_struct', e.g. 'sda'?)
>
> The srcu_struct structure sees NR_CPUS via include/linux/rcu_node_tree.h,
> which sizes the srcu_node array at build time.
>
> The sda pointer references a per-CPU allocation, which I believe already
> is sized to the actual system rather than to NR_CPUS.
>
> Thanx, Paul
>
> > Thanks,
> > Mike
> >
> > >
> > > ---
> > > drivers/md/dm-core.h | 3 ++-
> > > drivers/md/dm.c | 6 +++---
> > > 2 files changed, 5 insertions(+), 4 deletions(-)
> > >
> > > Index: linux-2.6/drivers/md/dm-core.h
> > > ===================================================================
> > > --- linux-2.6.orig/drivers/md/dm-core.h
> > > +++ linux-2.6/drivers/md/dm-core.h
> > > @@ -29,7 +29,6 @@ struct dm_kobject_holder {
> > > * DM targets must _not_ deference a mapped_device to directly access its members!
> > > */
> > > struct mapped_device {
> > > - struct srcu_struct io_barrier;
> > > struct mutex suspend_lock;
> > >
> > > /*
> > > @@ -127,6 +126,8 @@ struct mapped_device {
> > > struct blk_mq_tag_set *tag_set;
> > > bool use_blk_mq:1;
> > > bool init_tio_pdu:1;
> > > +
> > > + struct srcu_struct io_barrier;
> > > };
> > >
> > > void dm_init_md_queue(struct mapped_device *md);
> > > Index: linux-2.6/drivers/md/dm.c
> > > ===================================================================
> > > --- linux-2.6.orig/drivers/md/dm.c
> > > +++ linux-2.6/drivers/md/dm.c
> > > @@ -1695,7 +1695,7 @@ static struct mapped_device *alloc_dev(i
> > > struct mapped_device *md;
> > > void *old_md;
> > >
> > > - md = kzalloc_node(sizeof(*md), GFP_KERNEL, numa_node_id);
> > > + md = kvzalloc_node(sizeof(*md), GFP_KERNEL, numa_node_id);
> > > if (!md) {
> > > DMWARN("unable to allocate device, out of memory.");
> > > return NULL;
> > > @@ -1795,7 +1795,7 @@ bad_io_barrier:
> > > bad_minor:
> > > module_put(THIS_MODULE);
> > > bad_module_get:
> > > - kfree(md);
> > > + kvfree(md);
> > > return NULL;
> > > }
> > >
> > > @@ -1814,7 +1814,7 @@ static void free_dev(struct mapped_devic
> > > free_minor(minor);
> > >
> > > module_put(THIS_MODULE);
> > > - kfree(md);
> > > + kvfree(md);
> > > }
> > >
> > > static void __bind_mempools(struct mapped_device *md, struct dm_table *t)
> >
>
Powered by blists - more mailing lists