[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171109164941.GZ28761@minitux>
Date: Thu, 9 Nov 2017 08:49:41 -0800
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Damien Riegel <damien.riegel@...oirfairelinux.com>
Cc: linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>, kernel@...oirfairelinux.com
Subject: Re: [PATCH 1/4] arm64: dts: qcom: pm8916: fix wcd_codec indentation
On Wed 01 Nov 10:53 PDT 2017, Damien Riegel wrote:
> Indentation did not respect kernel standards, so fix that for the usual
> indent with tabs, align with spaces. While at it, remove some empty
> lines before and after the closing parenthesis of this block.
>
> Signed-off-by: Damien Riegel <damien.riegel@...oirfairelinux.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Regards,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/pm8916.dtsi | 82 ++++++++++++++++++------------------
> 1 file changed, 40 insertions(+), 42 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
> index 53deebf9f515..d19f4cb9a5f3 100644
> --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
> @@ -96,47 +96,45 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> - wcd_codec: codec@...0 {
> - compatible = "qcom,pm8916-wcd-analog-codec";
> - reg = <0xf000 0x200>;
> - reg-names = "pmic-codec-core";
> - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
> - clock-names = "mclk";
> - interrupt-parent = <&spmi_bus>;
> - interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
> - <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
> - <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
> - <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
> - <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
> - <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
> - <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
> - <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
> - <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
> - <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
> - <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
> - <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
> - <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
> - <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
> - interrupt-names = "cdc_spk_cnp_int",
> - "cdc_spk_clip_int",
> - "cdc_spk_ocp_int",
> - "mbhc_ins_rem_det1",
> - "mbhc_but_rel_det",
> - "mbhc_but_press_det",
> - "mbhc_ins_rem_det",
> - "mbhc_switch_int",
> - "cdc_ear_ocp_int",
> - "cdc_hphr_ocp_int",
> - "cdc_hphl_ocp_det",
> - "cdc_ear_cnp_int",
> - "cdc_hphr_cnp_int",
> - "cdc_hphl_cnp_int";
> - vdd-cdc-io-supply = <&pm8916_l5>;
> - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
> - vdd-micbias-supply = <&pm8916_l13>;
> - #sound-dai-cells = <1>;
> -
> - };
> -
> + wcd_codec: codec@...0 {
> + compatible = "qcom,pm8916-wcd-analog-codec";
> + reg = <0xf000 0x200>;
> + reg-names = "pmic-codec-core";
> + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
> + clock-names = "mclk";
> + interrupt-parent = <&spmi_bus>;
> + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
> + interrupt-names = "cdc_spk_cnp_int",
> + "cdc_spk_clip_int",
> + "cdc_spk_ocp_int",
> + "mbhc_ins_rem_det1",
> + "mbhc_but_rel_det",
> + "mbhc_but_press_det",
> + "mbhc_ins_rem_det",
> + "mbhc_switch_int",
> + "cdc_ear_ocp_int",
> + "cdc_hphr_ocp_int",
> + "cdc_hphl_ocp_det",
> + "cdc_ear_cnp_int",
> + "cdc_hphr_cnp_int",
> + "cdc_hphl_cnp_int";
> + vdd-cdc-io-supply = <&pm8916_l5>;
> + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
> + vdd-micbias-supply = <&pm8916_l13>;
> + #sound-dai-cells = <1>;
> + };
> };
> };
> --
> 2.15.0
>
Powered by blists - more mailing lists