| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4c1a4932-87af-4593-94f5-94739cc61084@chromium.org>
Date: Fri, 17 Nov 2017 16:38:04 +0900
From: Alexandre Courbot <acourbot@...omium.org>
To: Gustavo Padovan <gustavo@...ovan.org>
Cc: <linux-media@...r.kernel.org>, Hans Verkuil <hverkuil@...all.nl>,
Mauro Carvalho Chehab <mchehab@....samsung.com>,
Shuah Khan <shuahkh@....samsung.com>,
Pawel Osciak <pawel@...iak.com>,
Sakari Ailus <sakari.ailus@....fi>,
Brian Starkey <brian.starkey@....com>,
Thierry Escande <thierry.escande@...labora.com>,
<linux-kernel@...r.kernel.org>,
Gustavo Padovan <gustavo.padovan@...labora.com>
Subject: Re: [RFC v5 10/11] [media] vb2: add out-fence support to QBUF
On Thursday, November 16, 2017 2:10:56 AM JST, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.padovan@...labora.com>
>
> If V4L2_BUF_FLAG_OUT_FENCE flag is present on the QBUF call we create
> an out_fence and send its fd to userspace on the fence_fd field as a
> return arg for the QBUF call.
>
> The fence is signaled on buffer_done(), when the job on the buffer is
> finished.
>
> With out-fences we do not allow drivers to requeue buffers through vb2,
> instead we flag an error on the buffer, signals it fence with error and
s/it/its
> return it to userspace.
>
> v6
> - get rid of the V4L2_EVENT_OUT_FENCE event. We always keep the
> ordering in vb2 for queueing in the driver, so the event is not
> necessary anymore and the out_fence_fd is sent back to userspace
> on QBUF call return arg
> - do not allow requeueing with out-fences, instead mark the buffer
> with an error and wake up to userspace.
> - send the out_fence_fd back to userspace on the fence_fd field
>
> v5:
> - delay fd_install to DQ_EVENT (Hans)
> - if queue is fully ordered send OUT_FENCE event right away
> (Brian)
> - rename 'q->ordered' to 'q->ordered_in_driver'
> - merge change to implement OUT_FENCE event here
>
> v4:
> - return the out_fence_fd in the BUF_QUEUED event(Hans)
>
> v3: - add WARN_ON_ONCE(q->ordered) on requeueing (Hans)
> - set the OUT_FENCE flag if there is a fence pending (Hans)
> - call fd_install() after vb2_core_qbuf() (Hans)
> - clean up fence if vb2_core_qbuf() fails (Hans)
> - add list to store sync_file and fence for the next queued buffer
>
> v2: check if the queue is ordered.
>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@...labora.com>
> ---
> drivers/media/v4l2-core/videobuf2-core.c | 42
> +++++++++++++++++++++++++++++---
> drivers/media/v4l2-core/videobuf2-v4l2.c | 21 +++++++++++++++-
> 2 files changed, 58 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/v4l2-core/videobuf2-core.c
> b/drivers/media/v4l2-core/videobuf2-core.c
> index 8b4f0e9bcb36..2eb5ffa8e028 100644
> --- a/drivers/media/v4l2-core/videobuf2-core.c
> +++ b/drivers/media/v4l2-core/videobuf2-core.c
> @@ -354,6 +354,7 @@ static int __vb2_queue_alloc(struct
> vb2_queue *q, enum vb2_memory memory,
> vb->planes[plane].length = plane_sizes[plane];
> vb->planes[plane].min_length = plane_sizes[plane];
> }
> + vb->out_fence_fd = -1;
> q->bufs[vb->index] = vb;
>
> /* Allocate video buffer memory for the MMAP type */
> @@ -934,10 +935,26 @@ void vb2_buffer_done(struct vb2_buffer
> *vb, enum vb2_buffer_state state)
> case VB2_BUF_STATE_QUEUED:
> return;
> case VB2_BUF_STATE_REQUEUEING:
> - if (q->start_streaming_called)
> - __enqueue_in_driver(vb);
> - return;
> +
> + if (!vb->out_fence) {
> + if (q->start_streaming_called)
> + __enqueue_in_driver(vb);
> + return;
> + }
> +
> + /* Do not allow requeuing with explicit synchronization,
> + * report it as an error to userspace */
> + state = VB2_BUF_STATE_ERROR;
> +
> + /* fall through */
> default:
> + if (state == VB2_BUF_STATE_ERROR)
> + dma_fence_set_error(vb->out_fence, -EFAULT);
> + dma_fence_signal(vb->out_fence);
> + dma_fence_put(vb->out_fence);
> + vb->out_fence = NULL;
> + vb->out_fence_fd = -1;
> +
> /* Inform any processes that may be waiting for buffers */
> wake_up(&q->done_wq);
> break;
> @@ -1325,12 +1342,18 @@ EXPORT_SYMBOL_GPL(vb2_core_prepare_buf);
> int vb2_setup_out_fence(struct vb2_queue *q, unsigned int index)
> {
> struct vb2_buffer *vb;
> + u64 context;
>
> vb = q->bufs[index];
>
> vb->out_fence_fd = get_unused_fd_flags(O_CLOEXEC);
>
> - vb->out_fence = vb2_fence_alloc(q->out_fence_context);
> + if (q->ordered_in_driver)
> + context = q->out_fence_context;
> + else
> + context = dma_fence_context_alloc(1);
> +
> + vb->out_fence = vb2_fence_alloc(context);
> if (!vb->out_fence) {
> put_unused_fd(vb->out_fence_fd);
> return -ENOMEM;
> @@ -1594,6 +1617,9 @@ int vb2_core_qbuf(struct vb2_queue *q,
> unsigned int index, void *pb,
> if (pb)
> call_void_bufop(q, fill_user_buffer, vb, pb);
>
> + fd_install(vb->out_fence_fd, vb->sync_file->file);
What happens if the buffer does not have an output fence? Shouldn't this be
protected by a check on whether the buffer has been queued with
V4L2_BUF_FLAG_OUT_FENCE?
(... or maybe move this to vb2_setup_out_fence() after all, where we know
for sure an output fence exists).
> + vb->sync_file = NULL;
> +
> dprintk(2, "qbuf of buffer %d succeeded\n", vb->index);
> return 0;
>
> @@ -1860,6 +1886,12 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
> }
>
> /*
> + * Renew out-fence context.
> + */
> + if (q->ordered_in_driver)
> + q->out_fence_context = dma_fence_context_alloc(1);
> +
> + /*
> * Remove all buffers from videobuf's list...
> */
> INIT_LIST_HEAD(&q->queued_list);
> @@ -2191,6 +2223,8 @@ int vb2_core_queue_init(struct vb2_queue *q)
> spin_lock_init(&q->done_lock);
> mutex_init(&q->mmap_lock);
> init_waitqueue_head(&q->done_wq);
> + if (q->ordered_in_driver)
> + q->out_fence_context = dma_fence_context_alloc(1);
>
> if (q->buf_struct_size == 0)
> q->buf_struct_size = sizeof(struct vb2_buffer);
> diff --git a/drivers/media/v4l2-core/videobuf2-v4l2.c
> b/drivers/media/v4l2-core/videobuf2-v4l2.c
> index 4c09ea007d90..f2e60d2908ae 100644
> --- a/drivers/media/v4l2-core/videobuf2-v4l2.c
> +++ b/drivers/media/v4l2-core/videobuf2-v4l2.c
> @@ -212,7 +212,13 @@ static void __fill_v4l2_buffer(struct
> vb2_buffer *vb, void *pb)
> b->sequence = vbuf->sequence;
> b->reserved = 0;
>
> - b->fence_fd = -1;
> + if (vb->out_fence) {
> + b->flags |= V4L2_BUF_FLAG_OUT_FENCE;
> + b->fence_fd = vb->out_fence_fd;
> + } else {
> + b->fence_fd = -1;
> + }
> +
> if (vb->in_fence)
> b->flags |= V4L2_BUF_FLAG_IN_FENCE;
> else
> @@ -489,6 +495,10 @@ int vb2_querybuf(struct vb2_queue *q,
> struct v4l2_buffer *b)
> ret = __verify_planes_array(vb, b);
> if (!ret)
> vb2_core_querybuf(q, b->index, b);
> +
> + /* Do not return the out-fence fd on querybuf */
> + if (vb->out_fence)
> + b->fence_fd = -1;
> return ret;
> }
> EXPORT_SYMBOL(vb2_querybuf);
> @@ -593,6 +603,15 @@ int vb2_qbuf(struct vb2_queue *q, struct
> v4l2_buffer *b)
> }
> }
>
> + if (b->flags & V4L2_BUF_FLAG_OUT_FENCE) {
> + ret = vb2_setup_out_fence(q, b->index);
> + if (ret) {
> + dprintk(1, "failed to set up out-fence\n");
> + dma_fence_put(fence);
> + return ret;
> + }
> + }
> +
> return vb2_core_qbuf(q, b->index, b, fence);
> }
> EXPORT_SYMBOL_GPL(vb2_qbuf);
Powered by blists - more mailing lists