[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOMZO5DcM0u9+DZjywsqadu834++rXAckqnkMqzZOo-vgFVs_w@mail.gmail.com>
Date: Sun, 26 Nov 2017 17:39:56 -0200
From: Fabio Estevam <festevam@...il.com>
To: Sebastien Bourdelin <sebastien.bourdelin@...oirfairelinux.com>
Cc: linux-kernel <linux-kernel@...r.kernel.org>,
kernel@...oirfairelinux.com,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Fabio Estevam <fabio.estevam@....com>,
Sascha Hauer <kernel@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Mark Rutland <mark.rutland@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
Mark Featherston <mark@...eddedarm.com>, kris@...eddedarm.com
Subject: Re: [PATCH v8 2/2] ARM: dts: TS-4600: add basic device tree
Hi Sebastien,
On Thu, Nov 23, 2017 at 7:04 PM, Sebastien Bourdelin
<sebastien.bourdelin@...oirfairelinux.com> wrote:
> + reg_vddio_sd0: regulator-vddio-sd0 {
> + compatible = "regulator-fixed";
> + regulator-name = "vddio-sd0";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
It seems this should be GPIO_ACTIVE_LOW instead, as you don't pass
'enable-active-high' here.
Powered by blists - more mailing lists