[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <2409397.V1Gq0kr6Gu@new-mexico>
Date: Mon, 27 Nov 2017 16:08:10 +1100
From: Alistair Popple <alistair@...ple.id.au>
To: Ivan Mikhaylov <ivan@...ibm.com>
Cc: Matt Porter <mporter@...nel.crashing.org>,
linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Joel Stanley <joel@....id.au>,
Paul Mackerras <paulus@...ba.org>,
Michael Ellerman <mpe@...erman.id.au>
Subject: Re: [PATCH 2/4] 44x/fsp2: l2 setup with error clear
I'm not familiar with the hardware setup going on here so I can't comment on
it's correctness but the code looks ok. A commit message describing why this
particular setup is needed would be nice though.
Reviewed-by: Alistair Popple <alistair@...ple.id.au>
On Thursday, 2 November 2017 4:07:04 PM AEDT Ivan Mikhaylov wrote:
> Signed-off-by: Ivan Mikhaylov <ivan@...ibm.com>
> ---
> arch/powerpc/platforms/44x/fsp2.c | 37 +++++++++++++++++++++++++++++++++++++
> 1 files changed, 37 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/platforms/44x/fsp2.c b/arch/powerpc/platforms/44x/fsp2.c
> index 92e9804..9585725 100644
> --- a/arch/powerpc/platforms/44x/fsp2.c
> +++ b/arch/powerpc/platforms/44x/fsp2.c
> @@ -27,6 +27,8 @@
> #include <asm/time.h>
> #include <asm/uic.h>
> #include <asm/ppc4xx.h>
> +#include <asm/fsp2_reg.h>
> +#include <asm/dcr.h>
>
> static __initdata struct of_device_id fsp2_of_bus[] = {
> { .compatible = "ibm,plb4", },
> @@ -44,10 +46,45 @@ static int __init fsp2_device_probe(void)
>
> static int __init fsp2_probe(void)
> {
> + u32 val;
> unsigned long root = of_get_flat_dt_root();
>
> if (!of_flat_dt_is_compatible(root, "ibm,fsp2"))
> return 0;
> +
> + /* Clear BC_ERR and mask snoopable request plb errors. */
> + val = mfdcr(DCRN_PLB6_CR0);
> + val |= 0x20000000;
> + mtdcr(DCRN_PLB6_BASE, val);
> + mtdcr(DCRN_PLB6_HD, 0xffff0000);
> + mtdcr(DCRN_PLB6_SHD, 0xffff0000);
> +
> + /* L2 machine checks */
> + mtl2(L2PLBMCKEN0, 0xffffffff);
> + mtl2(L2PLBMCKEN1, 0x0000ffff);
> + mtl2(L2ARRMCKEN0, 0xffffffff);
> + mtl2(L2ARRMCKEN1, 0xffffffff);
> + mtl2(L2ARRMCKEN2, 0xfffff000);
> + mtl2(L2CPUMCKEN, 0xffffffff);
> + mtl2(L2RACMCKEN0, 0xffffffff);
> + mtl2(L2WACMCKEN0, 0xffffffff);
> + mtl2(L2WACMCKEN1, 0xffffffff);
> + mtl2(L2WACMCKEN2, 0xffffffff);
> + mtl2(L2WDFMCKEN, 0xffffffff);
> +
> + /* L2 interrupts */
> + mtl2(L2PLBINTEN1, 0xffff0000);
> +
> + /*
> + * At a global level, enable all L2 machine checks and interrupts
> + * reported by the L2 subsystems, except for the external machine check
> + * input (UIC0.1).
> + */
> + mtl2(L2MCKEN, 0x000007ff);
> + mtl2(L2INTEN, 0x000004ff);
> +
> + /* Enable FSP-2 configuration logic parity errors */
> + mtdcr(DCRN_CONF_EIR_RS, 0x80000000);
> return 1;
> }
>
>
Powered by blists - more mailing lists