linux-kernel - Re: [PATCH v2] ARM: dts: sun8i: h3: enable USB OTG for NanoPi Neo board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20171207090311.deat4rvbthye4b52@flea.lan>
Date:   Thu, 7 Dec 2017 10:03:11 +0100
From:   Maxime Ripard <maxime.ripard@...e-electrons.com>
To:     Krzysztof Adamski <k@...ko.eu>
Cc:     Chen-Yu Tsai <wens@...e.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>
Subject: Re: [PATCH v2] ARM: dts: sun8i: h3: enable USB OTG for NanoPi Neo
 board

On Tue, Dec 05, 2017 at 11:03:58PM +0100, Krzysztof Adamski wrote:
> Similarly to Orange Pi Zero, NanoPi Neo board has an USB OTG port with
> an ID pin but with unpowered VBUS. This patch enables this port in
> forced peripheral mode.
> 
> ohci/ehci nodes are still enabled since the host mode may work if
> external power source is used. In that case, the mode can be switched
> for example via sysfs. The same strategy is used for Orange Pi Zero
> board DTS.
> 
> Signed-off-by: Krzysztof Adamski <k@...ko.eu>

Applied, thanks!

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)