[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171214130941.26666-6-kishon@ti.com>
Date: Thu, 14 Dec 2017 18:39:34 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Tony Lindgren <tony@...mide.com>,
Adrian Hunter <adrian.hunter@...el.com>
CC: Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
<linux-mmc@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <nsekhar@...com>,
<kishon@...com>
Subject: [PATCH 05/12] mmc: sdhci-omap: Workaround for Errata i802
Errata i802 in AM572x Sitara Processors Silicon Revision 2.0, 1.1
(SPRZ429K July 2014–Revised March 2017 [1]) mentions
DCRC error interrupts (MMCHS_STAT[21] DCRC=0x1) can occur
during the tuning procedure and it has to be disabled during the
tuning procedure Implement workaround for Errata i802 here..
[1] -> http://www.ti.com/lit/er/sprz429k/sprz429k.pdf
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
drivers/mmc/host/sdhci-omap.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index df8a0a472996..b20f4c79ccc6 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -266,6 +266,7 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_omap_host *omap_host;
struct device *dev;
+ u32 ier = host->ier;
pltfm_host = sdhci_priv(host);
omap_host = sdhci_pltfm_priv(pltfm_host);
@@ -283,6 +284,16 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
reg |= DLL_SWT;
sdhci_omap_writel(omap_host, SDHCI_OMAP_DLL, reg);
+ /*
+ * OMAP5/DRA74X/DRA72x Errata i802:
+ * DCRC error interrupts (MMCHS_STAT[21] DCRC=0x1) can occur
+ * during the tuning procedure. So disable it during the
+ * tuning procedure.
+ */
+ ier &= ~SDHCI_INT_DATA_CRC;
+ sdhci_writel(host, ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
+
while (phase_delay <= MAX_PHASE_DELAY) {
sdhci_omap_set_dll(omap_host, phase_delay);
@@ -328,6 +339,8 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
ret:
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
return ret;
}
--
2.11.0
Powered by blists - more mailing lists