linux-kernel - [PATCH 01/12] mmc: sdhci-omap: Update 'power_mode' outside sdhci_omap_init_74

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20171214130941.26666-2-kishon@ti.com>
Date:   Thu, 14 Dec 2017 18:39:30 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Tony Lindgren <tony@...mide.com>,
        Adrian Hunter <adrian.hunter@...el.com>
CC:     Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>,
        <linux-mmc@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <nsekhar@...com>,
        <kishon@...com>
Subject: [PATCH 01/12] mmc: sdhci-omap: Update 'power_mode' outside sdhci_omap_init_74_clocks

Updating 'power_mode' in sdhci_omap_init_74_clocks results in
'power_mode' never updated to MMC_POWER_OFF during card
removal. This results in initialization sequence not sent to the
card during re-insertion.
Fix it here by adding sdhci_omap_set_power_mode to update power_mode.
This function can also be used later to perform operations that
are specific to a power mode (e.g, disable tuning during power off).

Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 drivers/mmc/host/sdhci-omap.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 628bfe9a3d17..96985786cadf 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -244,6 +244,12 @@ static int sdhci_omap_start_signal_voltage_switch(struct mmc_host *mmc,
 	return 0;
 }
 
+static void sdhci_omap_set_power_mode(struct sdhci_omap_host *omap_host,
+				      u8 power_mode)
+{
+	omap_host->power_mode = power_mode;
+}
+
 static void sdhci_omap_set_bus_mode(struct sdhci_omap_host *omap_host,
 				    unsigned int mode)
 {
@@ -273,6 +279,7 @@ static void sdhci_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	sdhci_omap_set_bus_mode(omap_host, ios->bus_mode);
 	sdhci_set_ios(mmc, ios);
+	sdhci_omap_set_power_mode(omap_host, ios->power_mode);
 }
 
 static u16 sdhci_omap_calc_divisor(struct sdhci_pltfm_host *host,
@@ -401,8 +408,6 @@ static void sdhci_omap_init_74_clocks(struct sdhci_host *host, u8 power_mode)
 	sdhci_omap_writel(omap_host, SDHCI_OMAP_STAT, INT_CC_EN);
 
 	enable_irq(host->irq);
-
-	omap_host->power_mode = power_mode;
 }
 
 static struct sdhci_ops sdhci_omap_ops = {
@@ -504,6 +509,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	omap_host->host = host;
 	omap_host->base = host->ioaddr;
 	omap_host->dev = dev;
+	omap_host->power_mode = MMC_POWER_UNDEFINED;
 	host->ioaddr += offset;
 
 	mmc = host->mmc;
-- 
2.11.0