linux-kernel - [PATCH 1/2] dt-bindings: at24: new optional property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20171219161432.29809-2-brgl@bgdev.pl>
Date:   Tue, 19 Dec 2017 17:14:31 +0100
From:   Bartosz Golaszewski <brgl@...ev.pl>
To:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Peter Rosin <peda@...ntia.se>
Cc:     linux-i2c@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Bartosz Golaszewski <brgl@...ev.pl>
Subject: [PATCH 1/2] dt-bindings: at24: new optional property - write-protect-gpios

AT24 EEPROMs have a write-protect pin, which - when pulled high -
inhibits writes to the upper quadrant of memory (although it has been
observed that on some chips it disables writing to the entire memory
range).

On some boards, this pin is connected to a GPIO and pulled high by
default, which forces the user to manually change its state before
writing. On linux this means that we either need to hog the line all
the time, or set the GPIO value before writing from outside of the
at24 driver.

Add a new optional property to the device tree binding document, which
allows to specify the GPIO line to which the write-protect pin is
connected.

Signed-off-by: Bartosz Golaszewski <brgl@...ev.pl>
---
 Documentation/devicetree/bindings/eeprom/at24.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
index a0415b8471bb..e489654c02ae 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ b/Documentation/devicetree/bindings/eeprom/at24.txt
@@ -43,10 +43,14 @@ Optional properties:
 			eeprom does not automatically roll over reads to the next
 			slave address. Please consult the manual of your device.

+  - write-protect-gpios: GPIO to which the write-protect pin of the chip is
+                         is connected.
+
 Example:

 eeprom@52 {
 	compatible = "atmel,24c32";
 	reg = <0x52>;
 	pagesize = <32>;
+	write-protect-gpios = <&gpio1 3 0>;
 };
-- 
2.15.1