| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20171227152356.GJ20967@kroah.com>
Date: Wed, 27 Dec 2017 16:23:56 +0100
From: Greg KH <gregkh@...uxfoundation.org>
To: Stanislav Nijnikov <stanislav.nijnikov@....com>
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
alex.lemberg@....com
Subject: Re: [PATCH v2 9/9] ufs: sysfs: attributes
On Wed, Dec 27, 2017 at 05:13:47PM +0200, Stanislav Nijnikov wrote:
> This patch introduces a sysfs group entry for the UFS attributes. The
> group adds "attributes" folder under the UFS driver sysfs entry
> (/sys/bus/platform/drivers/ufshcd/*). The attributes are shown
> as hexadecimal numbers. The full information about the attributes could
> be found at UFS specifications 2.1.
>
> Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@....com>
> ---
> Documentation/ABI/testing/sysfs-driver-ufs | 141 ++++++++++++++++++++++++++++-
> drivers/scsi/ufs/ufs-sysfs.c | 90 ++++++++++++++++++
> drivers/scsi/ufs/ufs-sysfs.h | 1 +
> drivers/scsi/ufs/ufs.h | 27 +++++-
> drivers/scsi/ufs/ufshcd.c | 6 +-
> drivers/scsi/ufs/ufshcd.h | 2 +
> 6 files changed, 260 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
> index 832da97..804e952 100644
> --- a/Documentation/ABI/testing/sysfs-driver-ufs
> +++ b/Documentation/ABI/testing/sysfs-driver-ufs
> @@ -662,4 +662,143 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> Description: This file shows whether the device FW update is permanently
> disabled. The full information about the flag could be found
> at UFS specifications 2.1.
> - The file is read only.
> \ No newline at end of file
> + The file is read only.
> +
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the boot lun enabled UFS device attribute.
> + The full information about the attribute could be found at
> + UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the current power mode UFS device attribute.
> + The full information about the attribute could be found at
> + UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the active icc level UFS device attribute.
> + The full information about the attribute could be found at
> + UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the out of order data transfer enabled UFS
> + device attribute. The full information about the attribute
> + could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the background operations status UFS device
> + attribute. The full information about the attribute could
> + be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the purge operation status UFS device
> + attribute. The full information about the attribute could
> + be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file shows the maximum data size in a DATA IN
> + UPIU. The full information about the attribute could
> + be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file shows the maximum number of bytes that can be
> + requested with a READY TO TRANSFER UPIU. The full information
> + about the attribute could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the reference clock frequency UFS device
> + attribute. The full information about the attribute could
> + be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file shows whether the configuration descriptor is locked.
> + The full information about the attribute could be found at
> + UFS specifications 2.1. The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the maximum current number of
> + outstanding RTTs in device that is allowed. The full
> + information about the attribute could be found at
> + UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the exception event control UFS device
> + attribute. The full information about the attribute could
> + be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the exception event status UFS device
> + attribute. The full information about the attribute could
> + be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file provides the ffu status UFS device attribute.
> + The full information about the attribute could be found at
> + UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file show the PSA feature status. The full information
> + about the attribute could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file shows the amount of data that the host plans to
> + load to all logical units in pre-soldering state.
> + The full information about the attribute could be found at
> + UFS specifications 2.1.
> + The file is read only.
> +
> +
> +What: /sys/class/scsi_device/*/device/dyn_cap_needed
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
> +Description: This file shows the The amount of physical memory needed
> + to be removed from the physical memory resources pool of
> + the particular logical unit. The full information about
> + the attribute could be found at UFS specifications 2.1.
> + The file is read only.
> diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
> index de80c20..637a907 100644
> --- a/drivers/scsi/ufs/ufs-sysfs.c
> +++ b/drivers/scsi/ufs/ufs-sysfs.c
> @@ -469,6 +469,64 @@ static const struct attribute_group ufs_sysfs_flags_group = {
> .attrs = ufs_sysfs_device_flags,
> };
>
> +#define ufs_sysfs_attribute_show_function(_name, _uname) \
> +static ssize_t _name##_show(struct device *dev, \
> + struct device_attribute *attr, char *buf) \
> +{ \
> + struct ufs_hba *hba = dev_get_drvdata(dev); \
> + u32 value; \
> + if (ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, \
> + QUERY_ATTR_IDN_##_uname, 0, 0, &value)) \
> + return -EINVAL; \
> + return sprintf(buf, "0x%08X\n", value); \
> +}
> +
> +#define UFS_ATTRIBUTE(_name, _uname) \
> + ufs_sysfs_attribute_show_function(_name, _uname) \
> + static DEVICE_ATTR_RO(_name)
> +
> +UFS_ATTRIBUTE(boot_lun_enabled, BOOT_LU_EN);
> +UFS_ATTRIBUTE(current_power_mode, POWER_MODE);
> +UFS_ATTRIBUTE(active_icc_level, ACTIVE_ICC_LVL);
> +UFS_ATTRIBUTE(ooo_data_enabled, OOO_DATA_EN);
> +UFS_ATTRIBUTE(bkops_status, BKOPS_STATUS);
> +UFS_ATTRIBUTE(purge_status, PURGE_STATUS);
> +UFS_ATTRIBUTE(max_data_in_size, MAX_DATA_IN);
> +UFS_ATTRIBUTE(max_data_out_size, MAX_DATA_OUT);
> +UFS_ATTRIBUTE(reference_clock_frequency, REF_CLK_FREQ);
> +UFS_ATTRIBUTE(configuration_descriptor_lock, CONF_DESC_LOCK);
> +UFS_ATTRIBUTE(max_number_of_rtt, MAX_NUM_OF_RTT);
> +UFS_ATTRIBUTE(exception_event_control, EE_CONTROL);
> +UFS_ATTRIBUTE(exception_event_status, EE_STATUS);
> +UFS_ATTRIBUTE(ffu_status, FFU_STATUS);
> +UFS_ATTRIBUTE(psa_state, PSA_STATE);
> +UFS_ATTRIBUTE(psa_data_size, PSA_DATA_SIZE);
> +
> +static struct attribute *ufs_sysfs_attributes[] = {
> + &dev_attr_boot_lun_enabled.attr,
> + &dev_attr_current_power_mode.attr,
> + &dev_attr_active_icc_level.attr,
> + &dev_attr_ooo_data_enabled.attr,
> + &dev_attr_bkops_status.attr,
> + &dev_attr_purge_status.attr,
> + &dev_attr_max_data_in_size.attr,
> + &dev_attr_max_data_out_size.attr,
> + &dev_attr_reference_clock_frequency.attr,
> + &dev_attr_configuration_descriptor_lock.attr,
> + &dev_attr_max_number_of_rtt.attr,
> + &dev_attr_exception_event_control.attr,
> + &dev_attr_exception_event_status.attr,
> + &dev_attr_ffu_status.attr,
> + &dev_attr_psa_state.attr,
> + &dev_attr_psa_data_size.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group ufs_sysfs_attributes_group = {
> + .name = "attributes",
> + .attrs = ufs_sysfs_attributes,
> +};
> +
> static const struct attribute_group *ufs_sysfs_groups[] = {
> &ufs_sysfs_device_descriptor_group,
> &ufs_sysfs_interconnect_descriptor_group,
> @@ -477,6 +535,7 @@ static const struct attribute_group *ufs_sysfs_groups[] = {
> &ufs_sysfs_power_descriptor_group,
> &ufs_sysfs_string_descriptors_group,
> &ufs_sysfs_flags_group,
> + &ufs_sysfs_attributes_group,
> NULL,
> };
>
> @@ -538,6 +597,37 @@ struct attribute_group ufs_sysfs_unit_descriptor_group = {
> };
> EXPORT_SYMBOL(ufs_sysfs_unit_descriptor_group);
>
> +#define ufs_sysfs_lun_attribute_show_function(_name, _uname) \
> +static ssize_t _name##_attribute_show(struct device *dev, \
> + struct device_attribute *attr, char *buf) \
> +{ \
> + u32 value; \
> + struct scsi_device *sdev = to_scsi_device(dev); \
> + struct ufs_hba *hba = shost_priv(sdev->host); \
> + u8 lun = ufshcd_scsi_to_upiu_lun(sdev->lun); \
> + if (ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, \
> + QUERY_ATTR_IDN_##_uname, lun, 0, &value)) \
> + return -EINVAL; \
> + return sprintf(buf, "0x%08X\n", value); \
> +}
> +
> +#define UFS_LUN_ATTRIBUTE(_name, _uname) \
> + ufs_sysfs_lun_attribute_show_function(_name, _uname) \
> + static DEVICE_ATTR_RO(_name##_attribute)
> +
> +
> +UFS_LUN_ATTRIBUTE(dyn_cap_needed, DYN_CAP_NEEDED);
> +
> +static struct attribute *ufs_sysfs_lun_attributes[] = {
> + &dev_attr_dyn_cap_needed_attribute.attr,
> + NULL,
> +};
> +
> +struct attribute_group ufs_sysfs_lun_attributes_group = {
> + .attrs = ufs_sysfs_lun_attributes,
> +};
> +EXPORT_SYMBOL(ufs_sysfs_lun_attributes_group);
> +
> void ufs_sysfs_add_device_management(struct ufs_hba *hba)
> {
> int ret;
> diff --git a/drivers/scsi/ufs/ufs-sysfs.h b/drivers/scsi/ufs/ufs-sysfs.h
> index 2d4d7c6..10692de 100644
> --- a/drivers/scsi/ufs/ufs-sysfs.h
> +++ b/drivers/scsi/ufs/ufs-sysfs.h
> @@ -10,4 +10,5 @@ void ufs_sysfs_add_device_management(struct ufs_hba *hba);
> void ufs_sysfs_remove_device_management(struct ufs_hba *hba);
>
> extern struct attribute_group ufs_sysfs_unit_descriptor_group;
> +extern struct attribute_group ufs_sysfs_lun_attributes_group;
> #endif
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index df5e73e..14e5bf7 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -145,10 +145,29 @@ enum flag_idn {
>
> /* Attribute idn for Query requests */
> enum attr_idn {
> - QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03,
> - QUERY_ATTR_IDN_BKOPS_STATUS = 0x05,
> - QUERY_ATTR_IDN_EE_CONTROL = 0x0D,
> - QUERY_ATTR_IDN_EE_STATUS = 0x0E,
> + QUERY_ATTR_IDN_BOOT_LU_EN = 0x00,
> + QUERY_ATTR_IDN_RESERVED = 0x01,
> + QUERY_ATTR_IDN_POWER_MODE = 0x02,
> + QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03,
> + QUERY_ATTR_IDN_OOO_DATA_EN = 0x04,
> + QUERY_ATTR_IDN_BKOPS_STATUS = 0x05,
> + QUERY_ATTR_IDN_PURGE_STATUS = 0x06,
> + QUERY_ATTR_IDN_MAX_DATA_IN = 0x07,
> + QUERY_ATTR_IDN_MAX_DATA_OUT = 0x08,
> + QUERY_ATTR_IDN_DYN_CAP_NEEDED = 0x09,
> + QUERY_ATTR_IDN_REF_CLK_FREQ = 0x0A,
> + QUERY_ATTR_IDN_CONF_DESC_LOCK = 0x0B,
> + QUERY_ATTR_IDN_MAX_NUM_OF_RTT = 0x0C,
> + QUERY_ATTR_IDN_EE_CONTROL = 0x0D,
> + QUERY_ATTR_IDN_EE_STATUS = 0x0E,
> + QUERY_ATTR_IDN_SECONDS_PASSED = 0x0F,
> + QUERY_ATTR_IDN_CNTX_CONF = 0x10,
> + QUERY_ATTR_IDN_CORR_PRG_BLK_NUM = 0x11,
> + QUERY_ATTR_IDN_RESERVED2 = 0x12,
> + QUERY_ATTR_IDN_RESERVED3 = 0x13,
> + QUERY_ATTR_IDN_FFU_STATUS = 0x14,
> + QUERY_ATTR_IDN_PSA_STATE = 0x15,
> + QUERY_ATTR_IDN_PSA_DATA_SIZE = 0x16,
> };
>
> /* Descriptor idn for Query requests */
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 72e5b9a..24c56df 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -2712,8 +2712,8 @@ EXPORT_SYMBOL(ufshcd_query_flag);
> *
> * Returns 0 for success, non-zero in case of failure
> */
> -static int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
> - enum attr_idn idn, u8 index, u8 selector, u32 *attr_val)
> +int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
> + enum attr_idn idn, u8 index, u8 selector, u32 *attr_val)
> {
> struct ufs_query_req *request = NULL;
> struct ufs_query_res *response = NULL;
> @@ -2764,6 +2764,7 @@ static int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
> ufshcd_release(hba);
> return err;
> }
> +EXPORT_SYMBOL(ufshcd_query_attr);
Same export symbol question here.
thanks,
greg k-h
Powered by blists - more mailing lists