lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <000001d37f27$5ea8f6e0$1bfae4a0$@gmail.com> Date: Wed, 27 Dec 2017 10:28:38 -0500 From: "Jingoo Han" <jingoohan1@...il.com> To: "'Felix Brack'" <fb@...c.ch>, <linux-fbdev@...r.kernel.org> Cc: <lee.jones@...aro.org>, <daniel.thompson@...aro.org>, <b.zolnierkie@...sung.com>, <linux-kernel@...r.kernel.org> Subject: Re: [PATCH v2] backlight: otm3225a: add support for ORISE OTM3225A LCD SoC On Wednesday, December 27, 2017 10:20 AM, Felix Brack wrote: > > This patch adds a LCD driver supporting the OTM3225A LCD SoC > from ORISE Technology. This device can drive TFT LC panels having a > resolution of 240x320 pixels. After initializing the OTM3225A using > it's SPI interface it switches to use 16-bib RGB as external > display interface. > > Signed-off-by: Felix Brack <fb@...c.ch> Acked-by: Jingoo Han <jingoohan1@...il.com> Best regards, Jingoo Han > > Changes in v2: > - use descriptive names for registers instead of hard coding them > - remove unnecessary registers in initialization sequence > - make use of resource-managed functions like devm_kzalloc() > instead of kzalloc() which simplifies and shortens the code > - replace mdelay() by msleep() > - use module_spi_init() since we do not do anything special > in init/exit > - use dev_name() instead of hard coding driver name multiple times > - use static storage class for structure otm3225a_ops > - sort include files alphabetically > - use standardized licensing header > - modify Makefile respecting alphabetical sort order > --- > drivers/video/backlight/Kconfig | 7 ++ > drivers/video/backlight/Makefile | 1 + > drivers/video/backlight/otm3225a.c | 251 > +++++++++++++++++++++++++++++++++++++ > 3 files changed, 259 insertions(+) > create mode 100644 drivers/video/backlight/otm3225a.c > > diff --git a/drivers/video/backlight/Kconfig > b/drivers/video/backlight/Kconfig > index 4e1d2ad..06e187b 100644 > --- a/drivers/video/backlight/Kconfig > +++ b/drivers/video/backlight/Kconfig > @@ -150,6 +150,13 @@ config LCD_HX8357 > If you have a HX-8357 LCD panel, say Y to enable its LCD control > driver. > > + config LCD_OTM3225A > + tristate "ORISE Technology OTM3225A support" > + depends on SPI > + help > + If you have a panel based on the OTM3225A controller > + chip then say y to include a driver for it. > + > endif # LCD_CLASS_DEVICE > > # > diff --git a/drivers/video/backlight/Makefile > b/drivers/video/backlight/Makefile > index 8905129..2473377 100644 > --- a/drivers/video/backlight/Makefile > +++ b/drivers/video/backlight/Makefile > @@ -12,6 +12,7 @@ obj-$(CONFIG_LCD_LD9040) += ld9040.o > obj-$(CONFIG_LCD_LMS283GF05) += lms283gf05.o > obj-$(CONFIG_LCD_LMS501KF03) += lms501kf03.o > obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o > +obj-$(CONFIG_LCD_OTM3225A) += otm3225a.o > obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o > obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o > obj-$(CONFIG_LCD_TDO24M) += tdo24m.o > diff --git a/drivers/video/backlight/otm3225a.c > b/drivers/video/backlight/otm3225a.c > new file mode 100644 > index 0000000..cb1df6c > --- /dev/null > +++ b/drivers/video/backlight/otm3225a.c > @@ -0,0 +1,251 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Driver for ORISE Technology OTM3225A SOC for TFT LCD > + * Copyright (C) 2017, EETS GmbH, Felix Brack <fb@...c.ch> > + * > + * This driver implements a lcd device for the ORISE OTM3225A display > + * controller. The control interface to the display is SPI and the > display's > + * memory is updated over the 16-bit RGB interface. > + * The main source of information for writing this driver was provided by > the > + * OTM3225A datasheet from ORISE Technology. Some information arise from > the > + * ILI9328 datasheet from ILITEK as well as from the datasheets and > sample code > + * provided by Crystalfontz America Inc. who sells the CFAF240320A-032T, > a 3.2" > + * TFT LC display using the OTM3225A controller. > + */ > + > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/kernel.h> > +#include <linux/lcd.h> > +#include <linux/module.h> > +#include <linux/spi/spi.h> > + > +#define OTM3225A_INDEX_REG 0x70 > +#define OTM3225A_DATA_REG 0x72 > + > +/* instruncton register list */ > +#define DRIVER_OUTPUT_CTRL_1 0x01 > +#define DRIVER_WAVEFORM_CTRL 0x02 > +#define ENTRY_MODE 0x03 > +#define SCALING_CTRL 0x04 > +#define DISPLAY_CTRL_1 0x07 > +#define DISPLAY_CTRL_2 0x08 > +#define DISPLAY_CTRL_3 0x09 > +#define FRAME_CYCLE_CTRL 0x0A > +#define EXT_DISP_IFACE_CTRL_1 0x0C > +#define FRAME_MAKER_POS 0x0D > +#define EXT_DISP_IFACE_CTRL_2 0x0F > +#define POWER_CTRL_1 0x10 > +#define POWER_CTRL_2 0x11 > +#define POWER_CTRL_3 0x12 > +#define POWER_CTRL_4 0x13 > +#define GRAM_ADDR_HORIZ_SET 0x20 > +#define GRAM_ADDR_VERT_SET 0x21 > +#define GRAM_READ_WRITE 0x22 > +#define POWER_CTRL_7 0x29 > +#define FRAME_RATE_CTRL 0x2B > +#define GAMMA_CTRL_1 0x30 > +#define GAMMA_CTRL_2 0x31 > +#define GAMMA_CTRL_3 0x32 > +#define GAMMA_CTRL_4 0x35 > +#define GAMMA_CTRL_5 0x36 > +#define GAMMA_CTRL_6 0x37 > +#define GAMMA_CTRL_7 0x38 > +#define GAMMA_CTRL_8 0x39 > +#define GAMMA_CTRL_9 0x3C > +#define GAMMA_CTRL_10 0x3D > +#define WINDOW_HORIZ_RAM_START 0x50 > +#define WINDOW_HORIZ_RAM_END 0x51 > +#define WINDOW_VERT_RAM_START 0x52 > +#define WINDOW_VERT_RAM_END 0x53 > +#define DRIVER_OUTPUT_CTRL_2 0x60 > +#define BASE_IMG_DISPLAY_CTRL 0x61 > +#define VERT_SCROLL_CTRL 0x6A > +#define PD1_DISPLAY_POS 0x80 > +#define PD1_RAM_START 0x81 > +#define PD1_RAM_END 0x82 > +#define PD2_DISPLAY_POS 0x83 > +#define PD2_RAM_START 0x84 > +#define PD2_RAM_END 0x85 > +#define PANEL_IFACE_CTRL_1 0x90 > +#define PANEL_IFACE_CTRL_2 0x92 > +#define PANEL_IFACE_CTRL_4 0x95 > +#define PANEL_IFACE_CTRL_5 0x97 > + > +struct otm3225a_data { > + struct spi_device *spi; > + struct lcd_device *ld; > + int power; > +}; > + > +struct otm3225a_spi_instruction { > + unsigned char reg; /* register to write */ > + unsigned short value; /* data to write to 'reg' */ > + unsigned short delay; /* delay in ms after write */ > +}; > + > +static struct otm3225a_spi_instruction display_init[] = { > + { DRIVER_OUTPUT_CTRL_1, 0x0000, 0 }, > + { DRIVER_WAVEFORM_CTRL, 0x0700, 0 }, > + { ENTRY_MODE, 0x50A0, 0 }, > + { SCALING_CTRL, 0x0000, 0 }, > + { DISPLAY_CTRL_2, 0x0606, 0 }, > + { DISPLAY_CTRL_3, 0x0000, 0 }, > + { FRAME_CYCLE_CTRL, 0x0000, 0 }, > + { EXT_DISP_IFACE_CTRL_1, 0x0000, 0 }, > + { FRAME_MAKER_POS, 0x0000, 0 }, > + { EXT_DISP_IFACE_CTRL_2, 0x0002, 0 }, > + { POWER_CTRL_2, 0x0007, 0 }, > + { POWER_CTRL_3, 0x0000, 0 }, > + { POWER_CTRL_4, 0x0000, 200 }, > + { DISPLAY_CTRL_1, 0x0101, 0 }, > + { POWER_CTRL_1, 0x12B0, 0 }, > + { POWER_CTRL_2, 0x0007, 0 }, > + { POWER_CTRL_3, 0x01BB, 50 }, > + { POWER_CTRL_4, 0x0013, 0 }, > + { POWER_CTRL_7, 0x0010, 50 }, > + { GAMMA_CTRL_1, 0x000A, 0 }, > + { GAMMA_CTRL_2, 0x1326, 0 }, > + { GAMMA_CTRL_3, 0x0A29, 0 }, > + { GAMMA_CTRL_4, 0x0A0A, 0 }, > + { GAMMA_CTRL_5, 0x1E03, 0 }, > + { GAMMA_CTRL_6, 0x031E, 0 }, > + { GAMMA_CTRL_7, 0x0706, 0 }, > + { GAMMA_CTRL_8, 0x0303, 0 }, > + { GAMMA_CTRL_9, 0x010E, 0 }, > + { GAMMA_CTRL_10, 0x040E, 0 }, > + { WINDOW_HORIZ_RAM_START, 0x0000, 0 }, > + { WINDOW_HORIZ_RAM_END, 0x00EF, 0 }, > + { WINDOW_VERT_RAM_START, 0x0000, 0 }, > + { WINDOW_VERT_RAM_END, 0x013F, 0 }, > + { DRIVER_OUTPUT_CTRL_2, 0x2700, 0 }, > + { BASE_IMG_DISPLAY_CTRL, 0x0001, 0 }, > + { VERT_SCROLL_CTRL, 0x0000, 0 }, > + { PD1_DISPLAY_POS, 0x0000, 0 }, > + { PD1_RAM_START, 0x0000, 0 }, > + { PD1_RAM_END, 0x0000, 0 }, > + { PD2_DISPLAY_POS, 0x0000, 0 }, > + { PD2_RAM_START, 0x0000, 0 }, > + { PD2_RAM_END, 0x0000, 0 }, > + { PANEL_IFACE_CTRL_1, 0x0010, 0 }, > + { PANEL_IFACE_CTRL_2, 0x0000, 0 }, > + { PANEL_IFACE_CTRL_4, 0x0210, 0 }, > + { PANEL_IFACE_CTRL_5, 0x0000, 0 }, > + { DISPLAY_CTRL_1, 0x0133, 0 }, > +}; > + > +static struct otm3225a_spi_instruction display_enable_rgb_interface[] = { > + { ENTRY_MODE, 0x1080, 0 }, > + { GRAM_ADDR_HORIZ_SET, 0x0000, 0 }, > + { GRAM_ADDR_VERT_SET, 0x0000, 0 }, > + { EXT_DISP_IFACE_CTRL_1, 0x0111, 500 }, > +}; > + > +static struct otm3225a_spi_instruction display_off[] = { > + { DISPLAY_CTRL_1, 0x0131, 100 }, > + { DISPLAY_CTRL_1, 0x0130, 100 }, > + { DISPLAY_CTRL_1, 0x0100, 0 }, > + { POWER_CTRL_1, 0x0280, 0 }, > + { POWER_CTRL_3, 0x018B, 0 }, > +}; > + > +static struct otm3225a_spi_instruction display_on[] = { > + { POWER_CTRL_1, 0x1280, 0 }, > + { DISPLAY_CTRL_1, 0x0101, 100 }, > + { DISPLAY_CTRL_1, 0x0121, 0 }, > + { DISPLAY_CTRL_1, 0x0123, 100 }, > + { DISPLAY_CTRL_1, 0x0133, 10 }, > +}; > + > +static void otm3225a_write(struct spi_device *spi, > + struct otm3225a_spi_instruction *instruction, > + unsigned int count) > +{ > + unsigned char buf[3]; > + > + while (count--) { > + /* address register using index register */ > + buf[0] = OTM3225A_INDEX_REG; > + buf[1] = 0x00; > + buf[2] = instruction->reg; > + spi_write(spi, buf, 3); > + > + /* write data to addressed register */ > + buf[0] = OTM3225A_DATA_REG; > + buf[1] = (instruction->value >> 8) & 0xff; > + buf[2] = instruction->value & 0xff; > + spi_write(spi, buf, 3); > + > + /* execute delay if any */ > + msleep(instruction->delay); > + instruction++; > + } > +} > + > +static int otm3225a_set_power(struct lcd_device *ld, int power) > +{ > + struct otm3225a_data *dd = lcd_get_data(ld); > + > + if (power == dd->power) > + return 0; > + > + if (power > FB_BLANK_UNBLANK) > + otm3225a_write(dd->spi, display_off, > ARRAY_SIZE(display_off)); > + else > + otm3225a_write(dd->spi, display_on, ARRAY_SIZE(display_on)); > + dd->power = power; > + > + return 0; > +} > + > +static int otm3225a_get_power(struct lcd_device *ld) > +{ > + struct otm3225a_data *dd = lcd_get_data(ld); > + > + return dd->power; > +} > + > +static struct lcd_ops otm3225a_ops = { > + .set_power = otm3225a_set_power, > + .get_power = otm3225a_get_power, > +}; > + > +static int otm3225a_probe(struct spi_device *spi) > +{ > + struct otm3225a_data *dd; > + struct lcd_device *ld; > + struct device *dev = &spi->dev; > + > + dd = devm_kzalloc(dev, sizeof(struct otm3225a_data), GFP_KERNEL); > + if (dd == NULL) > + return -ENOMEM; > + > + ld = devm_lcd_device_register(dev, dev_name(dev), dev, dd, > + &otm3225a_ops); > + if (IS_ERR(ld)) > + return PTR_ERR(ld); > + > + dd->spi = spi; > + dd->ld = ld; > + dev_set_drvdata(dev, dd); > + > + dev_info(dev, "Initializing and switching to RGB interface"); > + otm3225a_write(spi, display_init, ARRAY_SIZE(display_init)); > + otm3225a_write(spi, display_enable_rgb_interface, > + ARRAY_SIZE(display_enable_rgb_interface)); > + return 0; > +} > + > +static struct spi_driver otm3225a_driver = { > + .driver = { > + .name = "otm3225a", > + .owner = THIS_MODULE, > + }, > + .probe = otm3225a_probe, > +}; > + > +module_spi_driver(otm3225a_driver); > + > +MODULE_AUTHOR("Felix Brack <fb@...c.ch>"); > +MODULE_DESCRIPTION("OTM3225A TFT LCD driver"); > +MODULE_VERSION("1.0.0"); > +MODULE_LICENSE("GPL v2"); > -- > 2.7.4
Powered by blists - more mailing lists