linux-kernel - [PATCH v4 03/16] phy: qcom-qmp: Power-on PHY before initialization

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1514978930-31341-4-git-send-email-mgautam@codeaurora.org>
Date:   Wed,  3 Jan 2018 16:58:36 +0530
From:   Manu Gautam <mgautam@...eaurora.org>
To:     Kishon Vijay Abraham I <kishon@...com>
Cc:     Felipe Balbi <balbi@...nel.org>, linux-arm-msm@...r.kernel.org,
        linux-usb@...r.kernel.org, Manu Gautam <mgautam@...eaurora.org>,
        Vivek Gautam <vivek.gautam@...eaurora.org>,
        Varadarajan Narayanan <varada@...eaurora.org>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
        Fengguang Wu <fengguang.wu@...el.com>,
        Wei Yongjun <weiyongjun1@...wei.com>,
        linux-kernel@...r.kernel.org (open list:GENERIC PHY FRAMEWORK)
Subject: [PATCH v4 03/16] phy: qcom-qmp: Power-on PHY before initialization

PHY regulators which are enabled from power_on() must be ON
before turning-on clocks and initializing it as part of init().
As most of the core drivers perform power_on() after init(), move
PHY regulators enable to com_init() and use power_on() to
only enable pipe_clk. This pipe_clk is output from PHY and some
core drivers e.g. PCIe follow specific sequence after phy_init()
that mandates pipe_clk to be enabled from power_on() only.
On similar lines move clk_enable from init() to com_init() which
executes once for multi lane PHYs.

Signed-off-by: Manu Gautam <mgautam@...eaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 61 +++++++++++++++----------------------
 1 file changed, 24 insertions(+), 37 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 5fed1ae..1b82cea 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -724,36 +724,13 @@ static int qcom_qmp_phy_poweron(struct phy *phy)
 {
 	struct qmp_phy *qphy = phy_get_drvdata(phy);
 	struct qcom_qmp *qmp = qphy->qmp;
-	int num = qmp->cfg->num_vregs;
 	int ret;
 
-	dev_vdbg(&phy->dev, "Powering on QMP phy\n");
-
-	/* turn on regulator supplies */
-	ret = regulator_bulk_enable(num, qmp->vregs);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
-		return ret;
-	}
-
 	ret = clk_prepare_enable(qphy->pipe_clk);
-	if (ret) {
+	if (ret)
 		dev_err(qmp->dev, "pipe_clk enable failed, err=%d\n", ret);
-		regulator_bulk_disable(num, qmp->vregs);
-		return ret;
-	}
 
-	return 0;
-}
-
-static int qcom_qmp_phy_poweroff(struct phy *phy)
-{
-	struct qmp_phy *qphy = phy_get_drvdata(phy);
-	struct qcom_qmp *qmp = qphy->qmp;
-
-	regulator_bulk_disable(qmp->cfg->num_vregs, qmp->vregs);
-
-	return 0;
+	return ret;
 }
 
 static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
@@ -768,6 +745,19 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 		return 0;
 	}
 
+	/* turn on regulator supplies */
+	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
+	if (ret) {
+		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
+		goto err_reg_enable;
+	}
+
+	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+	if (ret) {
+		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+		goto err_clk_enable;
+	}
+
 	for (i = 0; i < cfg->num_resets; i++) {
 		ret = reset_control_deassert(qmp->resets[i]);
 		if (ret) {
@@ -812,6 +802,10 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 err_rst:
 	while (--i >= 0)
 		reset_control_assert(qmp->resets[i]);
+	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+err_clk_enable:
+	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+err_reg_enable:
 	mutex_unlock(&qmp->phy_mutex);
 
 	return ret;
@@ -841,6 +835,10 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp)
 	while (--i >= 0)
 		reset_control_assert(qmp->resets[i]);
 
+	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+
 	mutex_unlock(&qmp->phy_mutex);
 
 	return 0;
@@ -861,15 +859,9 @@ static int qcom_qmp_phy_init(struct phy *phy)
 
 	dev_vdbg(qmp->dev, "Initializing QMP phy\n");
 
-	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
-		return ret;
-	}
-
 	ret = qcom_qmp_phy_com_init(qmp);
 	if (ret)
-		goto err_com_init;
+		return ret;
 
 	if (cfg->has_lane_rst) {
 		ret = reset_control_deassert(qphy->lane_rst);
@@ -917,8 +909,6 @@ static int qcom_qmp_phy_init(struct phy *phy)
 		reset_control_assert(qphy->lane_rst);
 err_lane_rst:
 	qcom_qmp_phy_com_exit(qmp);
-err_com_init:
-	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
 
 	return ret;
 }
@@ -945,8 +935,6 @@ static int qcom_qmp_phy_exit(struct phy *phy)
 
 	qcom_qmp_phy_com_exit(qmp);
 
-	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
-
 	return 0;
 }
 
@@ -1060,7 +1048,6 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
 	.init		= qcom_qmp_phy_init,
 	.exit		= qcom_qmp_phy_exit,
 	.power_on	= qcom_qmp_phy_poweron,
-	.power_off	= qcom_qmp_phy_poweroff,
 	.owner		= THIS_MODULE,
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project