linux-kernel - [PATCH net-next v2 0/4] net: mvpp2: 1000BaseX and 2000BaseX support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180103150750.12974-1-antoine.tenart@free-electrons.com>
Date:   Wed,  3 Jan 2018 16:07:46 +0100
From:   Antoine Tenart <antoine.tenart@...e-electrons.com>
To:     davem@...emloft.net, kishon@...com
Cc:     Antoine Tenart <antoine.tenart@...e-electrons.com>, andrew@...n.ch,
        gregory.clement@...e-electrons.com, linux@...linux.org.uk,
        mw@...ihalf.com, stefanc@...vell.com, ymarkman@...vell.com,
        thomas.petazzoni@...e-electrons.com,
        miquel.raynal@...e-electrons.com, nadavh@...vell.com,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH net-next v2 0/4] net: mvpp2: 1000BaseX and 2000BaseX support

Hi all,

This series adds 1000BaseX and 2500BaseX support to the Marvell PPv2
driver. In order to use it, the 2.5 SGMII mode is added in the Marvell
common PHY driver (cp110-comphy).

This was tested on a mcbin.

All patches should probably go through net-next as patch 4/4 depends on
patch 1/4 to build and work.

Please note the two mvpp2 patches do not conflict with the ACPI series
v2 Marcin sent a few days ago, and the two series can be processed in
parallel. (Marcin is aware of me sending this series).

Thanks!
Antoine

Since v1:
  - s/PHY_MODE_SGMII_2_5G/PHY_MODE_2500SGMII/
  - Fixed a build error in 'net: mvpp2: 1000baseX support' (which was solved in
    the 2500baseX support one, but the bisection was broken).
  - Removed the dt patches, as the fourth network interface on the mcbin also
    needs PHYLINK support in the PPv2 driver to be correctly supported.

Antoine Tenart (4):
  phy: add 2.5G SGMII mode to the phy_mode enum
  phy: cp110-comphy: 2.5G SGMII mode
  net: mvpp2: 1000baseX support
  net: mvpp2: 2500baseX support

 drivers/net/ethernet/marvell/mvpp2.c         | 67 +++++++++++++++++++++++-----
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 17 +++++--
 include/linux/phy/phy.h                      |  1 +
 3 files changed, 72 insertions(+), 13 deletions(-)

-- 
2.14.3