[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b4ab0392-8ce8-721a-0f70-22bfd358ced6@st.com>
Date: Tue, 9 Jan 2018 10:04:17 +0100
From: Arnaud Pouliquen <arnaud.pouliquen@...com>
To: Matthias Kaehlcke <mka@...omium.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
CC: "alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Bhumika Goyal <bhumirks@...il.com>,
huang lin <hl@...k-chips.com>,
Brian Norris <briannorris@...omium.org>,
Dylan Reid <dgreid@...omium.org>
Subject: Re: [PATCH] ASoC: codecs: dmic: Make number of channels configurable
Hello Mathias,
Next time could you add patch version in your mail subject ( [PATCH vX])
easier to follow versions :-).
otherwise,
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@...com>
Regards,
Arnaud
On 01/05/2018 09:39 PM, Matthias Kaehlcke wrote:
> The DMIC DAI driver specifies a number of 1 to 8 channels for each DAI.
> The actual number of mics can currently not be configured in the device
> tree or audio glue, but is derived from the min/max channels of the CPU
> and codec DAI. A typical CPU DAI has two or more channels, in consequence
> a single mic is treated as a stereo/multi channel device, even though
> only one channel carries audio data.
>
> This change adds the option to specify the number of used DMIC channels
> in the device tree. When specified this value overwrites the default
> channels_max value of 8 in the snd_soc_dai_driver struct of the codec.
>
> Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
> ---
> Documentation/devicetree/bindings/sound/dmic.txt | 2 ++
> sound/soc/codecs/dmic.c | 24
> +++++++++++++++++++++++-
> 2 files changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/dmic.txt
> b/Documentation/devicetree/bindings/sound/dmic.txt
> index 54c8ef6498a8..f7bf65611453 100644
> --- a/Documentation/devicetree/bindings/sound/dmic.txt
> +++ b/Documentation/devicetree/bindings/sound/dmic.txt
> @@ -7,10 +7,12 @@ Required properties:
>
> Optional properties:
> - dmicen-gpios: GPIO specifier for dmic to control start and stop
> + - num-channels: Number of microphones on this DAI
>
> Example node:
>
> dmic_codec: dmic@0 {
> compatible = "dmic-codec";
> dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
> + num-channels = <1>;
> };
> diff --git a/sound/soc/codecs/dmic.c b/sound/soc/codecs/dmic.c
> index b88a1ee66f80..c88f974ebe3e 100644
> --- a/sound/soc/codecs/dmic.c
> +++ b/sound/soc/codecs/dmic.c
> @@ -107,8 +107,30 @@ static const struct snd_soc_codec_driver soc_dmic = {
>
> static int dmic_dev_probe(struct platform_device *pdev)
> {
> + int err;
> + u32 chans;
> + struct snd_soc_dai_driver *dai_drv = &dmic_dai;
> +
> + if (pdev->dev.of_node) {
> + err = of_property_read_u32(pdev->dev.of_node,
> "num-channels", &chans);
> + if (err && (err != -ENOENT))
> + return err;
> +
> + if (!err) {
> + if (chans < 1 || chans > 8)
> + return -EINVAL;
> +
> + dai_drv = devm_kzalloc(&pdev->dev,
> sizeof(*dai_drv), GFP_KERNEL);
> + if (!dai_drv)
> + return -ENOMEM;
> +
> + memcpy(dai_drv, &dmic_dai, sizeof(*dai_drv));
> + dai_drv->capture.channels_max = chans;
> + }
> + }
> +
> return snd_soc_register_codec(&pdev->dev,
> - &soc_dmic, &dmic_dai, 1);
> + &soc_dmic, dai_drv, 1);
> }
>
> static int dmic_dev_remove(struct platform_device *pdev)
> --
> 2.16.0.rc0.223.g4a4ac83678-goog
>
Powered by blists - more mailing lists