| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <cover.1515621150.git.cyrille.pitchen@free-electrons.com>
Date: Wed, 10 Jan 2018 23:47:29 +0100
From: Cyrille Pitchen <cyrille.pitchen@...e-electrons.com>
To: bhelgaas@...gle.com, kishon@...com, lorenzo.pieralisi@....com,
linux-pci@...r.kernel.org
Cc: adouglas@...ence.com, stelford@...ence.com, dgary@...ence.com,
kgopi@...ence.com, eandrews@...ence.com,
thomas.petazzoni@...e-electrons.com, sureshp@...ence.com,
nsekhar@...com, linux-kernel@...r.kernel.org, robh@...nel.org,
devicetree@...r.kernel.org,
Cyrille Pitchen <cyrille.pitchen@...e-electrons.com>
Subject: [PATCH v3 0/6] PCI: Add support to the Cadence PCIe controller
Hi all,
this series of patches adds support to the Cadence PCIe controller.
It was tested on a ARM64 platform emulated by a Palladium running the
pci-next kernel.
The host mode was tested with some PCIe devices connected to the Palladium
through a speed-bridge. Some of those devices were a USB host controller
and a SATA controller. The PCIe host controller was also tested with a
second controller configured in endpoint mode and connected back to back
to the first controller.
The EndPoint Controller (EPC) driver was removed only because I didn't
have time to take all Kishon's comments into account. However, using a
fixed patch based on patch 7 of the v2 series + another patch fixing
the EPF device name chosen by pci_epf_make(), I was abled to probe
both function 0 and function 1 of the of the 2nd Cadence PCIe controller
configured in endpoint mode (new hardware design since v2 so function 1
is now available).
Currently I'm facing 2 issues, which I didn't have enough time to
investigate and to fix yet:
1 - when the vendor:device IDs are set to 104c:b500 for both functions,
then I remove both devfn (echo 1 > /sys/bus/pci/devices/$BDF/remove)
before scanning the PCI bus again (echo 1 > /sys/bus/pci/rescan),
the PCI enumeration fails reporting that the PCI memory is exhausted.
2 - when I set the vendor:device IDs to 104c:0100 for function 0 and
104c:b500 and remove only function 1 before scanning the PCI bus again,
I now pass the PCI enumeration. I also pass the 'pcitest -b <BAR>' test
but I fail on the MSI test ('pcitest -m <MSI>').
I'm still investigating on those issues.
Best regards,
Cyrille
ChangeLog
v2 -> v3:
- rebase on today's linux-pci/next (20180110)
patch1:
- rework the commit message of patch 1 and add two new comments on why endpoint
library users must be linked after the endpoint library itself and why
the dwc rule uses obj-y instead of obj-$(CONFIG_PCIE_CONFIG_DW).
- update patch 1 to add missing ifdef CONFIG_PCI / endif in
drivers/pci/dwc/Makefile around the obj-$(CONFIG_ARM64) += pcie-hisi.o rule,
like for the other obj-$(CONFIG_ARM64) rules in drivers/pci/host/Makefile.
patch2: unchanged
patch3:
- update patch 3 so the bridge hooks/members initialization is left to the
host bridges probe routines.
patch4: unchanged
patch5:
- collect 'Reviewed-by' tag from Rob Herring for the DT bindings.
patch6:
- remove explanation in the commit message on why obj-$(CONFIG_PCIE_CANDENCE) is
placed after obj-$(CONFIG_PCI_ENDPOINT) in drivers/pci/Makefile since a
comment on it has been added into patch1.
- remove menuconfig PCI_CADENCE in drivers/pci/cadence/Kconfig to match
drivers/pci/dwc/Kconfig.
- adapt patch6 to the changes done in patch3 for the pci_host_probe() function.
v1 -> v2:
- add new properties in the device-tree bindings: 'cdns,max-outbound-regions'
and 'cdns,no-bar-match-nbits'.
- add a new patch to regroup all makefile rules in drivers/pci/Makefile, hence
cleaning drivers/Makefile up.
- change the license text to use the recommanded format:
// SPDX-License-Identifier: GPL-2.0
- add a new patch updating the API of the EPC library to add support to
multi-function devices.
- add a 2 new patches to share more common code between host controller drivers
- remove some useless tests
- add more comments in both drivers.
- fix DT bindings examples
- remove useless init of the primary, secondary and sub-ordinate bus numbers in
the PCI configuration space of the root port.
- remove cdns_pcie_ep_stop() function and rework cdns_pcie_ep_start() function
Cyrille Pitchen (5):
PCI: Regroup all PCI related entries into drivers/pci/Makefile
PCI: OF: Add generic function to parse and allocate PCI resources
PCI: Add generic function to probe PCI host controllers
PCI: Add vendor ID for Cadence
PCI: cadence: Add host driver for Cadence PCIe controller
Scott Telford (1):
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host
controller
.../bindings/pci/cdns,cdns-pcie-host.txt | 60 ++++
MAINTAINERS | 7 +
drivers/Makefile | 5 +-
drivers/pci/Kconfig | 2 +
drivers/pci/Makefile | 14 +-
drivers/pci/cadence/Kconfig | 16 +
drivers/pci/cadence/Makefile | 3 +
drivers/pci/cadence/pcie-cadence-host.c | 336 +++++++++++++++++++++
drivers/pci/cadence/pcie-cadence.c | 68 +++++
drivers/pci/cadence/pcie-cadence.h | 196 ++++++++++++
drivers/pci/dwc/Makefile | 2 +
drivers/pci/host/Makefile | 2 +
drivers/pci/host/pci-host-common.c | 74 +----
drivers/pci/of.c | 51 ++++
drivers/pci/probe.c | 33 ++
include/linux/pci.h | 10 +
include/linux/pci_ids.h | 2 +
17 files changed, 805 insertions(+), 76 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
create mode 100644 drivers/pci/cadence/Kconfig
create mode 100644 drivers/pci/cadence/Makefile
create mode 100644 drivers/pci/cadence/pcie-cadence-host.c
create mode 100644 drivers/pci/cadence/pcie-cadence.c
create mode 100644 drivers/pci/cadence/pcie-cadence.h
--
2.11.0
Powered by blists - more mailing lists