| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1516468460-4908-22-git-send-email-david@lechnology.com>
Date: Sat, 20 Jan 2018 11:14:00 -0600
From: David Lechner <david@...hnology.com>
To: linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sekhar Nori <nsekhar@...com>,
Kevin Hilman <khilman@...nel.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Adam Ford <aford173@...il.com>, linux-kernel@...r.kernel.org,
David Lechner <david@...hnology.com>
Subject: [PATCH v6 21/41] ARM: da850: add new clock init using common clock framework
This adds the new board-specific clock init in mach-davinci/da850.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also clean up the #includes since we are adding some here.
Signed-off-by: David Lechner <david@...hnology.com>
---
v6 changes:
- add blank lines between function calls
- include da8xx_register_cfgchip()
- add async1 and async2 clock domains
arch/arm/mach-davinci/da850.c | 79 +++++++++++++++++++++++++++++++++++++------
1 file changed, 69 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 5c86d77..0fdf647 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,37 +11,44 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
+#include <linux/cpufreq.h>
#include <linux/gpio.h>
#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
-#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
-#include "psc.h"
-#include <mach/irqs.h>
-#include <mach/cputype.h>
#include <mach/common.h>
-#include <mach/time.h>
-#include <mach/da8xx.h>
#include <mach/cpufreq.h>
+#include <mach/cputype.h>
+#include <mach/da8xx.h>
+#include <mach/irqs.h>
#include <mach/pm.h>
+#include <mach/time.h>
-#include "clock.h"
#include "mux.h"
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
+
#define DA850_PLL1_BASE 0x01e1a000
#define DA850_TIMER64P2_BASE 0x01f0c000
#define DA850_TIMER64P3_BASE 0x01f0d000
#define DA850_REF_FREQ 24000000
+#ifndef CONFIG_COMMON_CLK
static int da850_set_armrate(struct clk *clk, unsigned long rate);
static int da850_round_armrate(struct clk *clk, unsigned long rate);
static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
@@ -581,6 +588,7 @@ static struct clk_lookup da850_clks[] = {
CLK("ecap.2", "fck", &ecap2_clk),
CLK(NULL, NULL, NULL),
};
+#endif
/*
* Device specific mux setup
@@ -1168,6 +1176,7 @@ int da850_register_cpufreq(char *async_clk)
return platform_device_register(&da850_cpufreq_device);
}
+#ifndef CONFIG_COMMON_CLK
static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
int ret = 0, diff;
@@ -1230,12 +1239,14 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
return 0;
}
+#endif /* CONFIG_COMMON_CLK */
#else
int __init da850_register_cpufreq(char *async_clk)
{
return 0;
}
+#ifndef CONFIG_COMMON_CLK
static int da850_set_armrate(struct clk *clk, unsigned long rate)
{
return -EINVAL;
@@ -1250,6 +1261,7 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
return clk->rate;
}
+#endif /* CONFIG_COMMON_CLK */
#endif
/* VPIF resource, platform data */
@@ -1381,6 +1393,52 @@ void __init da850_init(void)
void __init da850_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll0, *pll1, *psc0, *psc1;
+ struct regmap *cfgchip;
+ struct clk *clk;
+ struct clk_hw *parent;
+
+ pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+ pll1 = ioremap(DA850_PLL1_BASE, SZ_4K);
+ psc0 = ioremap(DA8XX_PSC0_BASE, SZ_4K);
+ psc1 = ioremap(DA8XX_PSC1_BASE, SZ_4K);
+
+ cfgchip = da8xx_register_cfgchip();
+ if (WARN(IS_ERR(cfgchip), "failed to register CFGCHIP syscon"))
+ return;
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
+
+ da850_pll_clk_init(pll0, pll1);
+
+ da8xx_cfgchip_register_div4p5(cfgchip);
+
+ da8xx_cfgchip_register_async1(cfgchip);
+
+ clk = clk_register_fixed_factor(NULL, "async2", "pll0_auxclk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "i2c_davinci.1");
+ clk_register_clkdev(clk, "timer0", NULL);
+ clk_register_clkdev(clk, NULL, "davinci-wdt");
+
+ clk = da8xx_cfgchip_register_async3(cfgchip);
+
+ /* pll1_sysclk2 is not affected by CPU scaling, so use it for async3 */
+ parent = clk_hw_get_parent_by_index(__clk_get_hw(clk), 1);
+ if (parent)
+ clk_set_parent(clk, parent->clk);
+ else
+ pr_warn("%s: Failed to find async3 parent clock\n", __func__);
+
+ da850_psc_clk_init(psc0, psc1);
+
+ clk = clk_register_fixed_factor(NULL, "rmii", "pll0_sysclk7", 0, 1, 1);
+ clk_register_clkdev(clk, "rmii", NULL);
+
+ clk = da8xx_cfgchip_register_tbclk(cfgchip);
+ clk_register_clkdev(clk, "tbclk", "ehrpwm.0");
+ clk_register_clkdev(clk, "tbclk", "ehrpwm.1");
+#else
struct regmap *cfgchip;
cfgchip = da8xx_register_cfgchip();
@@ -1392,5 +1450,6 @@ void __init da850_init_time(void)
regmap_write_bits(cfgchip, CFGCHIP(3), CFGCHIP3_PLL1_MASTER_LOCK, 0);
davinci_clk_init(da850_clks);
+#endif
davinci_timer_init();
}
--
2.7.4
Powered by blists - more mailing lists