[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1516468460-4908-21-git-send-email-david@lechnology.com>
Date: Sat, 20 Jan 2018 11:13:59 -0600
From: David Lechner <david@...hnology.com>
To: linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sekhar Nori <nsekhar@...com>,
Kevin Hilman <khilman@...nel.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Adam Ford <aford173@...il.com>, linux-kernel@...r.kernel.org,
David Lechner <david@...hnology.com>
Subject: [PATCH v6 20/41] ARM: da830: add new clock init using common clock framework
This adds the new board-specific clock init in mach-davinci/da830.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also clean up the #includes since we are adding some here.
Signed-off-by: David Lechner <david@...hnology.com>
---
v6 changes:
- add blank lines between function calls
- include da8xx_register_cfgchip()
arch/arm/mach-davinci/da830.c | 49 +++++++++++++++++++++++++++++++++++++------
1 file changed, 43 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 39de5a6..0b6d0f3 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,23 +8,29 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clk/davinci.h>
+#include <linux/clkdev.h>
#include <linux/gpio.h>
#include <linux/init.h>
-#include <linux/clk.h>
#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
-#include "psc.h"
-#include <mach/irqs.h>
-#include <mach/cputype.h>
#include <mach/common.h>
-#include <mach/time.h>
+#include <mach/cputype.h>
#include <mach/da8xx.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
-#include "clock.h"
#include "mux.h"
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
+
/* Offsets of the 8 compare registers on the da830 */
#define DA830_CMP12_0 0x60
#define DA830_CMP12_1 0x64
@@ -37,6 +43,7 @@
#define DA830_REF_FREQ 24000000
+#ifndef CONFIG_COMMON_CLK
static struct pll_data pll0_data = {
.num = 1,
.phys_base = DA8XX_PLL0_BASE,
@@ -432,6 +439,7 @@ static struct clk_lookup da830_clks[] = {
CLK(NULL, "rmii", &rmii_clk),
CLK(NULL, NULL, NULL),
};
+#endif
/*
* Device specific mux setup
@@ -1223,7 +1231,36 @@ void __init da830_init(void)
void __init da830_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll0, *psc0, *psc1;
+ struct clk *clk;
+
+ pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+ psc0 = ioremap(DA8XX_PSC0_BASE, SZ_4K);
+ psc1 = ioremap(DA8XX_PSC1_BASE, SZ_4K);
+
+ da8xx_register_cfgchip();
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA830_REF_FREQ);
+
+ da830_pll_clk_init(pll0);
+
+ da830_psc_clk_init(psc0, psc1);
+
+ clk = clk_register_fixed_factor(NULL, "i2c0", "pll0_aux_clk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "i2c_davinci.1");
+
+ clk = clk_register_fixed_factor(NULL, "timer0", "pll0_aux_clk", 0, 1, 1);
+ clk_register_clkdev(clk, "timer0", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "timer1", "pll0_aux_clk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "davinci-wdt");
+
+ clk = clk_register_fixed_factor(NULL, "rmii", "pll0_sysclk7", 0, 1, 1);
+ clk_register_clkdev(clk, "rmii", NULL);
+#else
da8xx_register_cfgchip();
davinci_clk_init(da830_clks);
+#endif
davinci_timer_init();
}
--
2.7.4
Powered by blists - more mailing lists