| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180126151941.12183-8-embed3d@gmail.com>
Date: Fri, 26 Jan 2018 16:19:32 +0100
From: Philipp Rossak <embed3d@...il.com>
To: lee.jones@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
maxime.ripard@...e-electrons.com, wens@...e.org,
linux@...linux.org.uk, jic23@...nel.org, knaack.h@....de,
lars@...afoo.de, pmeerw@...erw.net, davem@...emloft.net,
hans.verkuil@...co.com, mchehab@...nel.org, rask@...melder.dk,
clabbe.montjoie@...il.com, sean@...s.org, krzk@...nel.org,
quentin.schulz@...e-electrons.com, icenowy@...c.io,
edu.molinas@...il.com, singhalsimran0@...il.com
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: [PATCH 07/16] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data
This patch reworks the driver to support nvmem calibration cells.
The driver checks if the nvmem calibration is supported and reads out
the nvmem. At the beginning of the startup process the calibration data
is written to the related registers.
Signed-off-by: Philipp Rossak <embed3d@...il.com>
---
drivers/iio/adc/sun4i-gpadc-iio.c | 52 +++++++++++++++++++++++++++++++++++++++
include/linux/mfd/sun4i-gpadc.h | 2 ++
2 files changed, 54 insertions(+)
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index bff06f2798e8..7b12666cdd9e 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -27,6 +27,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
@@ -81,6 +82,7 @@ struct gpadc_data {
bool has_bus_rst;
bool has_mod_clk;
int sensor_count;
+ bool supports_nvmem;
};
static const struct gpadc_data sun4i_gpadc_data = {
@@ -94,6 +96,7 @@ static const struct gpadc_data sun4i_gpadc_data = {
.sample_start = sun4i_gpadc_sample_start,
.sample_end = sun4i_gpadc_sample_end,
.sensor_count = 1,
+ .supports_nvmem = false,
};
static const struct gpadc_data sun5i_gpadc_data = {
@@ -107,6 +110,7 @@ static const struct gpadc_data sun5i_gpadc_data = {
.sample_start = sun4i_gpadc_sample_start,
.sample_end = sun4i_gpadc_sample_end,
.sensor_count = 1,
+ .supports_nvmem = false,
};
static const struct gpadc_data sun6i_gpadc_data = {
@@ -120,6 +124,7 @@ static const struct gpadc_data sun6i_gpadc_data = {
.sample_start = sun4i_gpadc_sample_start,
.sample_end = sun4i_gpadc_sample_end,
.sensor_count = 1,
+ .supports_nvmem = false,
};
static const struct gpadc_data sun8i_a33_gpadc_data = {
@@ -130,6 +135,7 @@ static const struct gpadc_data sun8i_a33_gpadc_data = {
.sample_start = sun4i_gpadc_sample_start,
.sample_end = sun4i_gpadc_sample_end,
.sensor_count = 1,
+ .supports_nvmem = false,
};
struct sun4i_gpadc_iio {
@@ -148,6 +154,8 @@ struct sun4i_gpadc_iio {
struct clk *mod_clk;
struct reset_control *reset;
int sensor_id;
+ u32 calibration_data[2];
+ bool has_calibration_data[2];
/* prevents concurrent reads of temperature and ADC */
struct mutex mutex;
struct thermal_zone_device *tzd;
@@ -459,6 +467,17 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
return info->data->sample_end(info);
}
+static void sunxi_calibrate(struct sun4i_gpadc_iio *info)
+{
+ if (info->has_calibration_data[0])
+ regmap_write(info->regmap, SUNXI_THS_CDATA_0_1,
+ info->calibration_data[0]);
+
+ if (info->has_calibration_data[1])
+ regmap_write(info->regmap, SUNXI_THS_CDATA_2_3,
+ info->calibration_data[1]);
+}
+
static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
{
/* clkin = 6MHz */
@@ -481,6 +500,7 @@ static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
static int sunxi_ths_sample_start(struct sun4i_gpadc_iio *info)
{
u32 value;
+ sunxi_calibrate(info);
if (info->data->ctrl0_map)
regmap_write(info->regmap, SUNXI_THS_CTRL0,
@@ -602,6 +622,9 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
struct resource *mem;
void __iomem *base;
int ret;
+ struct nvmem_cell *cell;
+ ssize_t cell_size;
+ u64 *cell_data;
info->data = of_device_get_match_data(&pdev->dev);
if (!info->data)
@@ -616,6 +639,35 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
if (IS_ERR(base))
return PTR_ERR(base);
+ info->has_calibration_data[0] = false;
+ info->has_calibration_data[1] = false;
+
+ if (!info->data->supports_nvmem)
+ goto no_nvmem;
+
+ cell = devm_nvmem_cell_get(&pdev->dev, "calibration");
+ if (IS_ERR(cell)) {
+ if (PTR_ERR(cell) == -EPROBE_DEFER)
+ return PTR_ERR(cell);
+ } else {
+ cell_data = (u64 *)nvmem_cell_read(cell, &cell_size);
+ devm_nvmem_cell_put(&pdev->dev, cell);
+ if (cell_size <= 4) {
+ info->has_calibration_data[0] = true;
+ info->calibration_data[0] = be32_to_cpu(cell_data[0] &
+ GENMASK(31, 0));
+ } else if (cell_size <= 8) {
+ info->has_calibration_data[0] = true;
+ info->calibration_data[0] = be32_to_cpu(cell_data[0] &
+ GENMASK(31, 0));
+ info->has_calibration_data[1] = true;
+ info->calibration_data[1] = be32_to_cpu(
+ (cell_data[0] >> 32) & GENMASK(31, 0));
+ }
+ }
+
+no_nvmem:
+
info->regmap = devm_regmap_init_mmio(&pdev->dev, base,
&sun4i_gpadc_regmap_config);
if (IS_ERR(info->regmap)) {
diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
index 40b4dd9d2405..c251002431bd 100644
--- a/include/linux/mfd/sun4i-gpadc.h
+++ b/include/linux/mfd/sun4i-gpadc.h
@@ -90,6 +90,8 @@
#define SUNXI_THS_CTRL0 0x00
#define SUNXI_THS_CTRL2 0x40
#define SUNXI_THS_FILTER 0x70
+#define SUNXI_THS_CDATA_0_1 0x74
+#define SUNXI_THS_CDATA_2_3 0x78
#define SUNXI_THS_TDATA0 0x80
#define SUNXI_THS_TDATA1 0x84
#define SUNXI_THS_TDATA2 0x88
--
2.11.0
Powered by blists - more mailing lists