[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFqH_531DL3DYp4kn_Gjxprp7NNoAnP4MMD4-PRN=yJ+mXJNnA@mail.gmail.com>
Date: Tue, 30 Jan 2018 10:30:36 +0100
From: Enric Balletbo Serra <eballetbo@...il.com>
To: Enric Balletbo i Serra <enric.balletbo@...labora.com>
Cc: Lee Jones <lee.jones@...aro.org>,
Daniel Thompson <daniel.thompson@...aro.org>,
Jingoo Han <jingoohan1@...il.com>,
Rob Herring <robh+dt@...nel.org>, Pavel Machek <pavel@....cz>,
Heiko Stuebner <heiko@...ech.de>,
Thierry Reding <thierry.reding@...il.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Richard Purdie <rpurdie@...ys.net>,
Jacek Anaszewski <jacek.anaszewski@...il.com>,
Linux PWM List <linux-pwm@...r.kernel.org>,
linux-fbdev@...r.kernel.org,
linux-kernel <linux-kernel@...r.kernel.org>,
Guenter Roeck <groeck@...omium.org>,
"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>
Subject: Re: [PATCH v5 1/5] pwm-backlight: enable/disable the PWM before/after
LCD enable toggle.
Hi,
2017-12-01 13:06 GMT+01:00 Enric Balletbo i Serra
<enric.balletbo@...labora.com>:
> Before this patch the enable signal was set before the PWM signal and
> vice-versa on power off. This sequence is wrong, at least, it is on
> the different panels datasheets that I checked, so I inverted the sequence
> to follow the specs.
>
> For reference the following panels have the mentioned sequence:
> - N133HSE-EA1 (Innolux)
> - N116BGE (Innolux)
> - N156BGE-L21 (Innolux)
> - B101EAN0 (Auo)
> - B101AW03 (Auo)
> - LTN101NT05 (Samsung)
> - CLAA101WA01A (Chunghwa)
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
> Acked-by: Daniel Thompson <daniel.thompson@...aro.org>
> Acked-by: Jingoo Han <jingoohan1@...il.com>
> ---
> Changes since v4:
> - Rebase on top of mainline.
> - Add the acks from Daniel Thompson and Jingoo Han.
> Changes since v3:
> - List the part numbers for the panel checked (Daniel Thompson)
> Changes since v2:
> - Add this as a separate patch (Thierry Reding)
> Changes since v1:
> - None
>
> drivers/video/backlight/pwm_bl.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> index 1c2289d..698ec68 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -54,10 +54,11 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)
> if (err < 0)
> dev_err(pb->dev, "failed to enable power supply\n");
>
> + pwm_enable(pb->pwm);
> +
> if (pb->enable_gpio)
> gpiod_set_value_cansleep(pb->enable_gpio, 1);
>
> - pwm_enable(pb->pwm);
> pb->enabled = true;
> }
>
> @@ -66,12 +67,12 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
> if (!pb->enabled)
> return;
>
> - pwm_config(pb->pwm, 0, pb->period);
> - pwm_disable(pb->pwm);
> -
> if (pb->enable_gpio)
> gpiod_set_value_cansleep(pb->enable_gpio, 0);
>
> + pwm_config(pb->pwm, 0, pb->period);
> + pwm_disable(pb->pwm);
> +
> regulator_disable(pb->power_supply);
> pb->enabled = false;
> }
> --
> 2.9.3
>
A gentle ping, It's been nearly two months since I sent this patchset,
there is anything else that prevents these patches to land or
incorporate in linux-next?
Thanks,
Enric
Powered by blists - more mailing lists