linux-kernel - Re: [PATCH 1/4] dt-bindings: dwc3: add binding documentation for UniPhier dwc3 glue driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180130211413.D3F5.4A936039@socionext.com>
Date:   Tue, 30 Jan 2018 21:14:14 +0900
From:   Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To:     Rob Herring <robh@...nel.org>
Cc:     Felipe Balbi <balbi@...nel.org>, <linux-usb@...r.kernel.org>,
        "Greg Kroah-Hartman" <gregkh@...uxfoundation.org>,
        Masahiro Yamada <yamada.masahiro@...ionext.com>,
        Mark Rutland <mark.rutland@....com>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        Jassi Brar <jaswinder.singh@...aro.org>,
        Masami Hiramatsu <masami.hiramatsu@...aro.org>
Subject: Re: [PATCH 1/4] dt-bindings: dwc3: add binding documentation for UniPhier dwc3 glue driver

Hi Rob,

Thank you for your comments.

On Mon, 29 Jan 2018 18:06:53 -0600 <robh@...nel.org> wrote:

> On Tue, Jan 23, 2018 at 10:00:51PM +0900, Kunihiko Hayashi wrote:
> > Add devicetree binding documentation for dwc3 glue driver implemented
> > on Socionext UniPhier SoCs.
> > 
> > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
> > ---
> >  .../devicetree/bindings/usb/dwc3-uniphier.txt      | 58 ++++++++++++++++++++++
> >  1 file changed, 58 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/usb/dwc3-uniphier.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/dwc3-uniphier.txt b/Documentation/devicetree/bindings/usb/dwc3-uniphier.txt
> > new file mode 100644
> > index 0000000..677e072
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/dwc3-uniphier.txt
> > @@ -0,0 +1,58 @@
> > +UniPhier DWC3 glue layer
> > +
> > +This describes the devicetree bindings for dwc3-uniphier driver implemented on
> > +Socionext UniPhier SoCs.
> > +
> > +Required properties:
> > +- compatible:
> > +  - "socionext,uniphier-pxs2-dwc3" : For UniPhier PXs2 SoC
> > +  - "socionext,uniphier-ld20-dwc3" : For UniPhier LD20 SoC
> > +- reg: Address and range of the glue logic
> > +- clocks: List of phandles for the clocks, and the number of phandles depends
> > +	  on SoC platform.
> 
> Number of clocks needs to be specific. It should be fixed per 
> compatible.

I'll apply dwc3-of-simple framework for core part and separate phy part
from the driver, and as a result the clocks will be separated into clocks
for core and phy.

The core clocks will be described with "clock-names" property like Qualcomm's
dwc3 driver in Documentation/devicetree/bindings/usb/qcom,dwc3.txt.

I think the remaining clocks will be also defined with clock-names properties
or fixed according to the compatible string in the phy driver.

> > +
> > +Optional properties:
> > +- resets: List of phandles for the resets, and the number of phandles depends
> > +	on SoC platform.
> 
> Same here.

Same as above.

Thank you,

---
Best Regards,
Kunihiko Hayashi