| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHp75Vdd58U1y-LOQGg=rePOWf1LeQsZxn2ykzBhXL013ztW3Q@mail.gmail.com>
Date: Wed, 31 Jan 2018 18:12:15 +0200
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Daniel Baluta <daniel.baluta@....com>
Cc: Mark Brown <broonie@...nel.org>,
ALSA Development Mailing List <alsa-devel@...a-project.org>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
wakasugi.jb@...asahi-kasei.co.jp, shengjiu.wang@....com,
mihai.serban@...il.com, cosmin.samoila@....com, linux-imx@....com,
Mihai Serban <mihai.serban@....com>
Subject: Re: [PATCH] ASoC: codecs: Add support for AK5558 ADC driver
On Wed, Jan 31, 2018 at 2:57 PM, Daniel Baluta <daniel.baluta@....com> wrote:
> AK5558 is a 32-bit, 768 kHZ sampling, differential input ADC
> for digital audio systems.
>
> Datasheet is available at:
>
> https://www.akm.com/akm/en/file/datasheet/AK5558VN.pdf
>
> Initial patch includes support for normal and TDM modes.
>
> Signed-off-by: Junichi Wakasugi <wakasugi.jb@...asahi-kasei.co.jp>
> Signed-off-by: Mihai Serban <mihai.serban@....com>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@....com>
> Signed-off-by: Daniel Baluta <daniel.baluta@....com>
4 authors of the code?!
> +/*
> + * ak5558.c -- audio driver for AK5558 ADC
> + *
> + * Copyright (C) 2015 Asahi Kasei Microdevices Corporation
> + * Copyright 2018 NXP
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
SPDX instead?
> + */
> +#include <linux/module.h>
> +#include <linux/init.h>
It would be one of them, not both.
> +#include <linux/i2c.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/gpio/consumer.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dapm.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/initval.h>
> +#include <sound/tlv.h>
> +#include <linux/of_gpio.h>
It seems redundant. See below.
> +#include <linux/regmap.h>
> +#include <linux/pm_runtime.h>
Better to keep list ordered.
> +/* AK5558 Codec Private Data */
> +struct ak5558_priv {
> + struct snd_soc_codec codec;
> + struct regmap *regmap;
> + struct i2c_client *i2c;
> + int fs; /* Sampling Frequency */
> + int rclk; /* Master Clock */
> + int pdn_gpio; /* Power on / Reset GPIO */
struct gpio_desc *power_gpio;
> + int slots;
> + int slot_width;
> +};
> +static int ak5558_set_mcki(struct snd_soc_codec *codec, int fs, int rclk)
> +{
> + u8 mode;
> +#ifndef AK5558_SLAVE_CKS_AUTO
> + int mcki_rate;
> +#endif
> +
> + dev_dbg(codec->dev, "%s fs=%d rclk=%d\n", __func__, fs, rclk);
__func__ is useless with dev_dbg(). See the run time options of Dynamic Debug.
> +
> + mode = snd_soc_read(codec, AK5558_02_CONTROL1);
> + mode &= ~AK5558_CKS;
> +
> +#ifdef AK5558_SLAVE_CKS_AUTO
> + mode |= AK5558_CKS_AUTO;
> +#else
> + if (fs != 0 && rclk != 0) {
if (fs && rclk) { ?
> + if (rclk % fs)
> + return -EINVAL;
> + mcki_rate = rclk / fs;
> + }
> +#endif
> + snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_CKS, mode);
> +
> + return 0;
> +}
> +
> +static int ak5558_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
> + unsigned int freq, int dir)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec);
> +
> + dev_dbg(dai->dev, "%s(%d)\n", __func__, __LINE__);
Useless. Function tracer can do this for you.
> +
> + ak5558->rclk = freq;
> + ak5558_set_mcki(codec, ak5558->fs, ak5558->rclk);
> +
> + return 0;
> +}
> +
> +static int ak5558_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + u8 format;
> +
> + dev_dbg(dai->dev, "%s(%d)\n", __func__, __LINE__);
> + default:
> + dev_err(codec->dev, "Clock mode unsupported");
dai->dev vs. codec->dev?
> + return -EINVAL;
> + }
> +}
> +static int ak5558_set_dai_mute(struct snd_soc_dai *dai, int mute)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec);
> + int ndt;
> +
> + if (mute) {
if (!mute)
return 0;
?
> + ndt = 0;
> + if (ak5558->fs != 0)
> + ndt = 583000 / ak5558->fs;
> + if (ndt < 5)
> + ndt = 5;
> + msleep(ndt);
msleep(max(ndt, 5));
> +}
> +static int ak5558_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
> + unsigned int rx_mask, int slots,
> + int slot_width)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec);
> + int tdm_mode = 0;
Useless assignment.
> + int reg;
> +
> + ak5558->slots = slots;
> + ak5558->slot_width = slot_width;
> +
> + switch (slots * slot_width) {
> + case 128:
> + tdm_mode = AK5558_MODE_TDM128;
> + break;
> + case 256:
> + tdm_mode = AK5558_MODE_TDM256;
> + break;
> + case 512:
> + tdm_mode = AK5558_MODE_TDM512;
> + break;
> + default:
> + tdm_mode = AK5558_MODE_NORMAL;
> + break;
> + }
> + return 0;
> +}
> +static int ak5558_startup(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *dai)
> +{
> + int ret;
> +
> + ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
> + SNDRV_PCM_HW_PARAM_RATE,
> + &ak5558_rate_constraints);
> + return ret;
return snd_pcm_hw_constraint_list(...); ?
> +}
> +static int ak5558_init_reg(struct snd_soc_codec *codec)
> +{
> + int ret;
> + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec);
> +
> + dev_dbg(codec->dev, "%s(%d)\n", __func__, __LINE__);
Useless.
> + usleep_range(10000, 11000);
> + if (gpio_is_valid(ak5558->pdn_gpio)) {
> + gpio_set_value_cansleep(ak5558->pdn_gpio, 0);
> + usleep_range(1000, 2000);
> + gpio_set_value_cansleep(ak5558->pdn_gpio, 1);
> + usleep_range(1000, 2000);
> + }
static void ak5558_power_off(...)
{
if (!ak5558->power_gpiod)
return;
gpiod_set_value_cansleep(ak5558->power_gpiod, 0);
usleep_range(1000, 2000);
}
static void ak5558_power_on(...)
{
if (!ak5558->power_gpiod)
return;
gpiod_set_value_cansleep(ak5558->power_gpiod, 1);
usleep_range(1000, 2000);
}
_power_off();
_power_on();
> + return 0;
> +}
> +static int ak5558_remove(struct snd_soc_codec *codec)
> +{
> + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec);
> +
> + ak5558_set_bias_level(codec, SND_SOC_BIAS_OFF);
> +
> + if (gpio_is_valid(ak5558->pdn_gpio)) {
> + gpio_set_value_cansleep(ak5558->pdn_gpio, 0);
> + usleep_range(1000, 2000);
> + }
_power_off();
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int ak5558_runtime_suspend(struct device *dev)
static int __maybe_unused ...
> +{
> + struct ak5558_priv *ak5558 = dev_get_drvdata(dev);
> +
> + regcache_cache_only(ak5558->regmap, true);
> + if (gpio_is_valid(ak5558->pdn_gpio)) {
> + gpio_set_value_cansleep(ak5558->pdn_gpio, 0);
> + usleep_range(1000, 2000);
> + }
_power_off();
> +
> + return 0;
> +}
> +
> +static int ak5558_runtime_resume(struct device *dev)
__maybe_unused
> +{
> + struct ak5558_priv *ak5558 = dev_get_drvdata(dev);
> +
> + if (gpio_is_valid(ak5558->pdn_gpio)) {
> + gpio_set_value_cansleep(ak5558->pdn_gpio, 0);
> + usleep_range(1000, 2000);
Why power off again?
> + gpio_set_value_cansleep(ak5558->pdn_gpio, 1);
> + usleep_range(1000, 2000);
> + }
_power_off(); // why?
_power_on();
> +}
> +#endif
ugly #ifdef.
> +static int ak5558_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct device_node *np = i2c->dev.of_node;
> + struct ak5558_priv *ak5558;
> + int ret = 0;
> +
> + dev_err(&i2c->dev, "%s(%d)\n", __func__, __LINE__);
> +
> + ak5558 = devm_kzalloc(&i2c->dev, sizeof(struct ak5558_priv),
> + GFP_KERNEL);
sizeof(*ak5558) ?
> + if (!ak5558)
> + return -ENOMEM;
> +
> + ak5558->regmap = devm_regmap_init_i2c(i2c, &ak5558_regmap);
> + if (IS_ERR(ak5558->regmap))
> + return PTR_ERR(ak5558->regmap);
> +
> + i2c_set_clientdata(i2c, ak5558);
> + ak5558->i2c = i2c;
> +
> + ak5558->pdn_gpio = of_get_named_gpio(np, "ak5558,pdn-gpio", 0);
> + if (gpio_is_valid(ak5558->pdn_gpio)) {
> + ret = devm_gpio_request_one(&i2c->dev, ak5558->pdn_gpio,
> + GPIOF_OUT_INIT_LOW, "ak5558,pdn");
> + if (ret) {
> + dev_err(&i2c->dev, "unable to get pdn gpio\n");
> + return ret;
> + }
> + }
devm_gpiod_get_optional();
> +}
> +static const struct i2c_device_id ak5558_i2c_id[] = {
> + { "ak5558", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, ak5558_i2c_id);
Do you really need this? (->probe_new() callback doesn't require above
to be present)
> +MODULE_AUTHOR("Junichi Wakasugi <wakasugi.jb@...asahi-kasei.co.jp>");
> +MODULE_AUTHOR("Mihai Serban <mihai.serban@....com>");
4 SoBs, 2 Authors. Please, fix accordingly.
> +MODULE_DESCRIPTION("ASoC AK5558 ADC driver");
> +MODULE_LICENSE("GPL");
It is not consistent with the header.
> + * ak5558.h -- audio driver for AK5558
SPDX?
No name of file in the file is a good practice as well.
> + *
> + * Copyright (C) 2016 Asahi Kasei Microdevices Corporation
> + * Copyright 2018 NXP
> +/* AK5558_02_CONTROL1 fields */
> +#define AK5558_DIF 0x02
GENMASK() ?
> +#define AK5558_BITS 0x04
Ditto.
> +#define AK5558_CKS 0x78
Ditto.
> +#define AK5558_MODE_BITS 0x60
Ditto.
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists